The migration of heavy metals and radionuclides is interrelated, and this study focusses on the interaction and complex influence of various toxicants. The rehabilitation of radioactively contaminated territories has a complex character and is based on scientifically supported measures to restore industrial, economic, and sociopsychological relations. We aim for the achievement of pre-emergency levels of hygienic norms of radioactive contamination of output products. This, in its sum, allows for further economic activity in these territories without restrictions on the basis of natural actions of autoremediation. Biosorption technologies based on bacterial biomass remain a promising direction for the remediation of soils contaminated with radionuclides and heavy metals that help immobilise and consolidate contaminants. A comprehensive understanding of the biosorption capacity of various preparations allows for the selection of more effective techniques for the elimination of contaminants, as well as the overcoming of differences between laboratory results and industrial use. Observation and monitoring make it possible to evaluate the migration process of heavy metals and radionuclides and identify regions with a disturbed balance of harmful substances. The promising direction of the soil application of phosphogypsum, a by-product of the chemical industry, in bioremediation processes is considered.
The examination of primary risk assessment methodologies reveals a significant expansion in recent years, particularly toward encompassing ecosystem preservation and predictive models for environmental contaminant behavior. However, alongside this progress, new challenges have surfaced, such as engineered nanoparticles, cumulative impacts, and the risks associated with emerging contaminants of concern. This research aims to uncover fresh perspectives within the realm of global environmental risk assessment concerning the stress on water resources. Based on the results, the directions for studying water pollution’s environmental risks are highlighted. Special attention is given to water multi-stressor challenges with significant impact and therefore to multi-risk assessment of aquatic ecosystem components and human health. The foundational framework for the primary phases of risk assessment was delineated, taking into account the existing body of prior research. Drawing from the current state of knowledge, the notion of evaluating cumulative ecological risks (termed multi-risk) stemming from pollutant exposure, encompassing emerging contaminants among other factors, is introduced. This encompasses the phases of contaminant migration, transformation, and accumulation within the various components of the hydrosphere, specifically in surface water bodies, groundwater, and their eventual discharge into the sea and ocean, within a unified global water system. Furthermore, alternative approaches for incorporating additional factors, such as climate change, into the overarching risk assessment framework have been pinpointed, offering novel perspectives for future research endeavors in this domain.
This article was aimed to solve an urgent problem of ensuring quality for prilling processes in vibrational prilling equipment. During the research, the need for the application of vibrational prilling to create a controlled impact on the process of jet decay on droplets with the proper characteristics was substantiated. Based on the experimental and theoretical studies of the process of decay of a liquid jet into drops, axisymmetric droplet oscillation modes for the different frequencies were observed. Frequency ranges of transition between modes of decay of a jet into drops were obtained. As a result, the mathematical model of the droplet deformation was refined. The experimental research data substantiated this model, and its implementation allowed determining the analytical dependencies for the components of the droplet deformation velocity. The proposed model explains the existence of different droplet oscillation modes depending on the frequency characteristics of the superimposed vibrational impact. Based on an analytical study of the droplet deformation velocity components, the limit values of the characteristics defining the transition between the different droplet oscillation modes were discovered. Analytical dependencies were also obtained to determine the diameter of the satellites and their total number.
Digestate as a by-product of biogas production requires appropriate utilization methods to convert it into a valuable resource. This study investigated the feasibility of using digestate from a biogas plant as a sustainable feedstock for fuel pellet production. Digestate from an agricultural biogas plant was dried and pelletized, both with and without the addition of biochar. The resulting pellets were analyzed for their physicochemical properties, elemental composition, and calorific value. Samples of pellets were examined using a calorimeter and XRF analyzer. Results showed that digestate pellets exhibited promising fuel characteristics comparable to traditional wood pellets (17.07–17.11 MJ/kg). However, the addition of biochar, while increasing calorific value, led to high ash content and elevated concentrations of Cl, S, N, Ni, Zn, exceeding acceptable limits defined by ISO 17225-6. Consequently, biochar addition is not recommended due to potential environmental concerns upon combustion. The findings highlight that digestate with initial moisture content of 7–7.5% is the most suitable for pelletization in terms of mechanical durability and strength quality. Further research is recommended to fully assess the environmental and economic viability of digestate-based fuel pellets. This approach addresses two issues: it enables waste utilization and produces a valuable resource.
Investigating characteristics for the secondary breakup of dropping liquid is a fundamental scientific and practical problem in multiphase flow. For its solving, it is necessary to consider the features of both the main hydrodynamic and secondary processes during spray granulation and vibration separation of heterogeneous systems. A significant difficulty in modeling the secondary breakup process is that in most technological processes, the breakup of droplets and bubbles occurs through the simultaneous action of several dispersion mechanisms. In this case, the existing mathematical models based on criterion equations do not allow establishing the change over time of the process’s main characteristics. Therefore, the present article aims to solve an urgent scientific and practical problem of studying the nonstationary process of the secondary breakup of liquid droplets under the condition of the vibrational impact of oscillatory elements. Methods of mathematical modeling were used to achieve this goal. This modeling allows obtaining analytical expressions to describe the breakup characteristics. As a result of modeling, the droplet size’s critical value was evaluated depending on the oscillation frequency. Additionally, the analytical expression for the critical frequency was obtained. The proposed methodology was derived for a range of droplet diameters of 1.6–2.6 mm. The critical value of the diameter for unstable droplets was also determined, and the dependence for breakup time was established. Notably, for the critical diameter in a range of 1.90–2.05 mm, the breakup time was about 0.017 s. The reliability of the proposed methodology was confirmed experimentally by the dependencies between the Ohnesorge and Reynolds numbers for different prilling process modes.
1 January 2022 in Ecological Engineering & Environmental Technology
Large-scale disasters at nuclear power plants (NPP) and their consequences are still the subject of discussion by the world scientific community, which makes mankind recognize the unsolved problem of radiation pollution. Accordingly, the search for new effective biocomposite materials with high...