Wentao Wang

Dr. Wentao Wang

University of Science and Technology Beijing, Beijing, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 November 2022 in Buildings
Verified
Journal Article
Open access
PDF file
Yajian WangYajian Wang
Yajian Wang
PLpengpeng li
pengpeng li
HLHuifang Liu
Huifang Liu
Wentao WangWentao Wang
Wentao Wang
YGYang Guo
Yang Guo
LWLinbing Wang
Linbing Wang
The main part of sewer pipelines is commonly made up of precast reinforced concrete pipes (RCPs). However, they often suffer from microbiologically induced concrete corrosion (MICC), which has made them less durable than expected. In this study, three-edge bearing tests (TEBT) are performed on full-scale RCPs with preset wall losses to determine how MICC influences their bearing performance. For this purpose, several bearing indices such as D-load, peak load, ultimate load, ring deflection, ring stiffness, and failure energy are presented or specified to characterize the load-carrying capacity, stiffness, and toughness of these RCPs. It is found that crown concrete corrosion hardly changes the mechanical behavior of the first elastic zone of RCPs, so that D-load is not affected, but it shortens the crack propagation zone significantly, leading to a reduction in ultimate and peak loads. Furthermore, RCPs’ ring stiffness and toughness are negatively correlated to thickness of wall loss, while the transverse deformability of the ring cross-section is positively correlated with it. Additionally, it was found that crown corrosion affects the ultimate load of different sizes of RCP in different ways. The 2000 mm RCP is affected the most, with a 50 percent reduction in ultimate load. The 1000 mm RCP follows, with a 36 percent reduction, and the 1500 mm RCP has a reduction of less than 20 percent. This research contributes to comprehending the degradation of in-service sewage pipes, hence informing decision making on sewer maintenance and rehabilitation.

6 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
Wentao WangWentao Wang
Wentao Wang
LWLinbing Wang
Linbing Wang
Asphalt pavement, which is mainly made up of the asphalt mixture, exhibits complicated mechanical behaviors under the combined effects of moving vehicle loads and external service environments. Multi-scale numerical simulation can well characterize behaviors of asphalt materials and asphalt pavement, and the essential research progress is systematically summarized from an entire view. This paper reviews extensive research works concerning aspects of the design, characterization, and prediction of performance for asphalt materials and asphalt pavement based on multi-scale numerical simulation. Firstly, full-scale performance modeling on asphalt pavement is discussed from aspects of structural dynamic response, structural and material evaluation, and wheel–pavement interaction. The correlation between asphalt material properties and pavement performance is also analyzed, and so is the hydroplaning phenomenon. Macro- and mesoscale simulations on the mechanical property characterization of the asphalt mixture and its components are then investigated, while virtual proportion design for the asphalt mixture is introduced. Features of two-dimensional and three-dimensional microscale modeling on the asphalt mixture are summarized, followed by molecular dynamics simulation on asphalt binders, aggregates, and their interface, while nanoscale behavior modeling on asphalt binders is presented. Finally, aspects that need more attention concerning this study’s topic are discussed, and several suggestions for future investigations are also presented.

4 June 2021 in International Journal of Pavement Research and Technology
Verified
Journal Article
Closed access
PDF file
Wentao WangWentao Wang
Wentao Wang
RLRong Luo
Rong Luo
HYHailu YANG
Hailu YANG
LWLinbing Wang
Linbing Wang

1 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Wentao WangWentao Wang
Wentao Wang
GYGuannan Yan
Guannan Yan
KZKang Zhao
Kang Zhao
LWLinbing Wang
Linbing Wang
Asphalt pavement presents diverse dynamic responses to vehicle loading in dry and saturated conditions, which can be systematically explored by numerical simulation. Building a numerical model based on the actual conditions of asphalt pavement is necessary, and relevant field tests should be subsequently conducted to monitor dynamic responses to calibrate and validate the numerical model. On the basis of strictly controlling the paths of vehicle wheels during field tests, this study numerically analyzed the dynamic responses of asphalt pavement in dry and saturated conditions under full-scale accelerated loading. The trends of the modeling results were consistent with those of field measurements. The increase in vehicle load significantly increased the magnitudes of stress, strain, and pore water pressure, while vehicle speed showed an obvious impact on pore water pressure. The dynamic responses decreased with pavement depths. Water made the dynamic responses more complex, and pore water pressure significantly decreased with depth within the upper layer of saturated asphalt pavement. Transverse distributions of indicators presented obvious compressive states in the regions in direct contact with vehicle wheels, while tensile states were found in the range of the middle vehicle axle. The numerical results provided a basis for field measurements in future studies, especially for the exploration of factors of temperature and layer depth.

13 September 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJianfeng Li
Jianfeng Li
HLHuifang Liu
Huifang Liu
Wentao WangWentao Wang
Wentao Wang
KZKang Zhao
Kang Zhao
YZYe Zhoujing
Ye Zhoujing
LWLinbing Wang
Linbing Wang
The wave velocity of acoustic emission (AE) can reflect the properties of materials, the types of AE sources and the propagation characteristics of AE in materials. At the same time, the wave velocity of AE is also an important parameter in source location calculation by the time-difference method. In this paper, a new AE wave velocity measurement method, the arbitrary wave (AW) method, is proposed and designed to measure the AE wave velocity of an asphalt mixture. This method is compared with the pencil lead break (PLB) method and the automatic sensor test (AST) method. Through comparison and analysis, as a new wave velocity measurement method of AE, the AW method shows the following advantages: A continuous AE signal with small attenuation, no crosstalk and a fixed waveform can be obtained by the AW method, which is more advantageous to distinguish the first arrival time of the acoustic wave and calculate the wave velocity of AE more accurately; the AE signal measured by the AW method has the characteristics of a high frequency and large amplitude, which is easy to distinguish from the noise signal with the characteristics of a low frequency and small amplitude; and the dispersion of the AE wave velocity measured by the AW method is smaller, which is more suitable for the measurement of the AE wave velocity of an asphalt mixture.

4 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Wentao WangWentao Wang
Wentao Wang
KZKang Zhao
Kang Zhao
TXTingting Xie
Tingting Xie
HLHuifang Liu
Huifang Liu
GZGuanyi Zhao
Guanyi Zhao
LWLinbing Wang
Linbing Wang
Asphalt binder plays an important role in the overall resistance of asphalt mixture to the moisture damage induced by a dynamic pore water pressure environment. This study evaluates the moisture sensitivity of asphalt binder from the perspective of rheological behaviors using the dynamic shear rheometer (DSR) and the bending beam rheometer (BBR) methods at high, medium, and low temperatures. The damage mechanism is further discussed quantitatively based on the Fourier transform infrared spectroscopy (FTIR) method. The results indicate that a longer conditioning duration is beneficial for asphalt binder to recover its adhesion at 60 °C in multiple stress creep recover (MSCR) tests, but the increasing pore water pressure magnitude of 60 psi held an opposite effect in this study. The asphalt binder’s fatigue life at 20 °C in linear amplitude sweep (LAS) tests decreased obviously with conditioning duration and environmental severity, but the reducing rate gradually slowed down, while the groups of 50 psi—4000 cycles and 60 psi—4000 cycles held a comparable erosion effect. Both the stiffness and relaxation moduli at −12 °C in the BBR tests exhibited an obvious decreasing trend with conditioning duration and environmental severity. The erosion effect on the asphalt binder was gradually enhanced, but it also exhibited a slightly more viscous performance. Water conditioning induced several obvious characteristic peaks in the FTIR absorbance spectra of the asphalt binder. The functional group indexes presented a trend of non-monotonic change with conditioning duration and environmental severity, which made the asphalt binder show complicated rheological behaviors, such as non-monotonic variations in performance and the abnormal improving effect induced by dynamic pore water pressure conditioning.