MEHMET NURİ YILDIRIM

Dr. MEHMET NURİ YILDIRIM


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 November 2019 in Journal of Adhesion Science and Technology
Verified
Journal Article
Closed access
MYMEHMET NURİ YILDIRIM
MEHMET NURİ YILDIRIM
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
EUEsra USLU
Esra USLU
In this study, the performances of type of demountable connectors used as connecting elements in the frame construction furniture are compared with the forces against shear force. The test samples were prepared from melamine-coated particle board (YL-Lam) and medium density fiberboard (MDF-Lam). Four types of demountable type of connection elements are used: metal L connection, plastic T connection, metal T connection and moon connection. The experimental samples were subjected to static stress tests under the critical loads that could be affected during the use. As a result of the experiments, the highest shear force was obtained from the test specimens prepared by using MDF-Lam and metal T connectors. The lowest was determined by using YL-Lam and plastic T connector. According to the results of the experiment, in the H type construction prepared with YL-Lam, when the shear force bearing capacity of the connection element is ordered from highest to lowest, respectively; Metal T, Moon, Metal L and Plastic T connectors were determined while in the construction prepared with MDF-Lam it is ordered as Metal T, Metal L, Plastic T and Moon connectors. In this study, the load-bearing capacity of the test samples and the load-deflection graph formed under this loading are given.

9 September 2025 in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
Verified
Journal Article
Closed access
ŞDŞemsettin Doruk
Şemsettin Doruk
MYMEHMET NURİ YILDIRIM
MEHMET NURİ YILDIRIM
SÖSüleyman Özcan
Süleyman Özcan
This study aims to evaluate the adhesion resistance of water-based single-component varnish layers to wood surfaces by incorporating sodium borate in varying proportions. The research was conducted using specimens obtained from wood materials of Scots pine (Pinus sylvestris L.), Turkish fir (Abies bornmülleriana Mattf.), Sessile oak (Quercus petraea L.), and Oriental beech (Fagus orientalis L.). These specimens were impregnated with sodium borate solution at concentrations of 1.5% and 2.5%. After the impregnation process, water-based varnish formulations containing different proportions of sodium borate (1.5% and 2.5%) were prepared. Once the varnish layers were fully dry, an adhesion test was conducted according to ASTM-D 4541-02 standards. As a general conclusion, it was found that the modified varnish and impregnation processes resulted in the highest efficiency with beech and oak wood materials, while the impact of the sodium borate was more limited on scots pine and fir wood materials.

15 September 2018 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
Verified
Journal Article
Open access
PDF file
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
MYMEHMET NURİ YILDIRIM
MEHMET NURİ YILDIRIM
Recep AykanRecep Aykan
Recep Aykan
In this study, the effects on the moment capacity of demountable fasteners used in furniture corner joints were investigated. Experimental specimens were prepared from wood based composite boards, synthetic resin coated particle board (YL-Lam) and fibre boards (MDF-Lam). Four different types of fasteners ( metal L, plastic T, metal T and corner fitting ) were used. The test specimens were subjected to compression and tensile testing under static loads, taking into account the critical loads that they could experience under their use. According to the test results, the diagonal compression test moment carrying capacity value; the highest value for the type of fasteners was observed in the test samples combined with the metal L connector, while the lowest value was determined in the test samples combined with the corner fitting. In the diagonal tension of wood-based composite board-connector element type interaction; the highest value was determined in the samples prepared MDF-Lam with the metal L connector, while the lowest value was observed in the test samples prepared YL-Lam with the corner fitting. In the light of these data, the combination of MDF-Lam with metal L connector can be applied to the furniture elements corner joints.

31 January 2019 in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
Verified
Journal Article
Open access
PDF file
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
MYMEHMET NURİ YILDIRIM
MEHMET NURİ YILDIRIM
Bu çalışmada, farklı ağaç malzemelerden elde edilen kavelalar kullanılarak hazırlanmış L-tipi mobilya birleştirmelerinin moment taşıma kapasiteleri araştırılmıştır. Çalışmada, birleştirme elemanı olarak Kestane (Castanea sativa), Meşe (Quercus petraea Lieble), DoğuKayını (Fagus orientalis Lipsky) ve Dişbudak (Fraxinus excelsior L.)odunlarından elde edilen kavelelar kullanılmıştır. Ahşap esaslı malzemelerden melamin plaka ile kaplanmış yonga levha (Lam-YL) ve orta yoğunlukta lif levha (MDF-Lam) konstrüksiyon malzemesiolarakseçilmiştir.Yapıştırma işleminde fiziksel olarak kuruyan ve mobilya endüstrisinde en çok kullanılan polivinilasetat (PVAc-D3) tutkalı kullanılmıştır. Deneyler ASTM-D1037 standartlarına göre statik yük altında gerçekleştirilmiştir. Çalışma sonucunda, diyagonal çekme yükü altında en yüksek moment taşıma kapasite değeri dişbudak kavelada (82.19 N.m), en düşük moment taşıma kapasitesi değeri ise kestane kavelasında (51.15 N.m) olduğu belirlenmiştir. Diyagonal basınç yüküaltında en yüksek moment taşıma kapasite değeri dişbudak kavelada (36.84 N.m), en düşük moment taşıma kapasitesi değeri ise kestane kavelasında (22.98 N.m) olduğu tespit edilmiştir. Varyans analizi sonuçlarına göre, basınç ve çekme yükü altında moment taşıma kapasitesi ortalama değeri üzerinde levha tipi ve kavela malzeme çeşidinin etkileri p<0.05 önem düzeyinde anlamlı iken, ikili etkileşim grupları incelendiğinde aralarında farkın istatistiksel olarak anlamlı olmadığı tespitedilmiştir. Levha türü sonuçlarına gore ise en yüksek değer melamin plaka ile kaplanmış orta yoğunlukta lif levha (MDF Lam), en düşük ise melamin plaka ile kaplanmış yonga levhada (Lam-YL) elde edilmiştir. Mobilya mukavemetinde önem arz eden “L” köşe birleştirmelerinde MDF-Lam malzemesi ve dişbudak kavelası ile birleştirilmiş konseptin kullanılması önerilebilir.

13 December 2025 in Drvna industrija
Verified
Journal Article
Open access
PDF file
MYMEHMET NURİ YILDIRIM
MEHMET NURİ YILDIRIM
SOSuleyman Ozcan
Suleyman Ozcan
In this study, test samples were prepared from CLT, wooden materials and wooden laminated materials, and bending strength and elasticity modulus values were determined. All samples were prepared using Scots pine (Pinus sylvestris L.) timber as the wood species and PVAc glue as the adhesive. Four-point bending test was applied to the test samples in two different directions, vertical and parallel to the glue line. Flexural and elastic modulus values were examined. The highest bending strength and elasticity modulus values were found in wood laminated material and the lowest in solid wood material. The average values of bending strength and modulus of elasticity were found to be higher in the direction parallel to the glue line than in the direction vertical to the glue line. As a result of the study, it can be said that CLT and wooden laminated materials can be used as an alternative to solid materials, which are frequently used as building and frame construction furniture materials.