Recep Aykan

Dr. Recep Aykan

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 November 2024 in Maderas. Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
HYHusnu YEL
Husnu YEL
UAUgur Aras
Ugur Aras
HKHulya Kalaycioglu
Hulya Kalaycioglu
Recep AykanRecep Aykan
Recep Aykan
The effect of using duroplast sanitary ware waste as a substitute for wood materials in cement-bonded wood panels was evaluated. Utilizing these wastes can provide considerable economic and environmental benefits by reducing the use of wood materials and the deposits in landfills. Cement-bonded wood panels were produced with the replacement of spruce wood materials by the duroplast sanitary ware waste particles in 10 wt%, 20 wt%, 30 wt%, and 40 wt%. The produced panels were examined in terms of physical, thermal, mechanical, and morphological properties and compared with the related standards. Experimental findings demonstrated that water absorption, moisture content, and thickness swelling values of the panels were enhanced by the addition of duroplast sanitary ware waste. The duroplast sanitary ware waste did not affect the density of the panels. The bending strength and the modulus of elasticity of the cement-bonded wood panels can be increased up to 23 % and 5,6 %, respectively, by the addition of 10 wt% duroplast sanitary ware waste particles. However, the internal bond strength and the screw withdrawal resistance values were reduced by an increment in the use of duroplast sanitary ware waste. The scanning electron microscope observation revealed that there was no mechanical interlocking between the duroplast sanitary ware waste and cement, and the formations of voids in the panels increased with an increase in the duroplast sanitary ware waste particle content. The thermal analysis showed that the use of duroplast sanitary ware waste resulted in increased cement hydration products due to the reduction in the wood content of cement-bonded wood panels.

10 August 2022 in BioResources
Verified
Journal Article
Closed access
Recep AykanRecep Aykan
Recep Aykan
CACumhur Avsar
Cumhur Avsar
MBMehmet Bilgehan Bilgiç
Mehmet Bilgehan Bilgiç
HKHaci İsmail Kesik
Haci İsmail Kesik

1 November 2024 in BioResources
Verified
Journal Article
Closed access
Recep AykanRecep Aykan
Recep Aykan
KDKazım Onur Demirarslan
Kazım Onur Demirarslan
EDElif Işik Demirarslan
Elif Işik Demirarslan
This study was conducted in a kindergarten classroom in the Ayancik district of Sinop province, Türkiye, and examined indoor air quality under five scenarios. The measured parameters included formaldehyde, TVOC (total volatile organic compounds), PM10 and PM2.5 (particulates), humidity, temperature, airflow velocity, and illumination level. The study found that using wood and plastic materials, such as toys, tables, and chairs, significantly influenced the indoor air quality in the kindergarten environment. Wood materials reduced formaldehyde, TVOC, and particulate matter (PM) levels. Formaldehyde levels ranged from 0.03 to 0.22 ppm, TVOC values from 0.001 to 0.003 mg/m³, PM10 levels from 16 to 52 µg/m³, and PM2.5 levels from 15 to 46 µg/m³. In Scenario 5, the lowest levels of formaldehyde and TVOC were recorded. These findings offer important insights for improving air quality in kindergartens and provide a foundation for future research. Careful selection of toys, design elements, and materials in kindergarten classrooms is critical for protecting children’s health and promoting development. Prioritizing high-quality indoor air in these environments is essential for enhancing children’s learning, health, and overall well-being.

16 November 2025 in Coatings
Verified
Journal Article
Open access
PDF file
Recep AykanRecep Aykan
Recep Aykan
HKHacı İsmail KESİK
Hacı İsmail KESİK
The aim of this study was to determine the effects of hygiene (H) and nano-color pigment (NCP) modifications on hardness, glossiness, and adhesion strength of some surface coating materials produced specifically for use in wooden toys. For this purpose, H- and NCP-modified polyurethane (PU) and waterborne (WBV) varnishes were applied to specimens prepared from Oriental beech (Fagus orientalis L.) and Oriental plane (Platanus orientalis L.) woods; Oriental beech, birch (Betula pendula), and poplar (Populus deltoides) plywood; and medium-density fiberboard (MDF). Then, hardness, glossiness, and adhesion values were determined. Results indicated that the highest values were obtained for hardness in PU and PU*NCP applied to MDF; for glossiness in WBV*H applied to birch plywood and MDF; and for adhesion strength in WBV and PU*H applied to beech. H and NCP modifications have significant effects on hardness, glossiness, and adhesion strength. As a result, it was determined that hardness and glossiness increased with H modification and decreased with NCP, especially glossiness. Furthermore, it was determined that H and NCP decreased the adhesion strength. Future studies comparing natural antibacterial effects of different wood species with various coating types will contribute to the development of products that are safe for children and sustainable.

15 September 2018 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
Verified
Journal Article
Open access
PDF file
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
MYMEHMET NURİ YILDIRIM
MEHMET NURİ YILDIRIM
Recep AykanRecep Aykan
Recep Aykan
In this study, the effects on the moment capacity of demountable fasteners used in furniture corner joints were investigated. Experimental specimens were prepared from wood based composite boards, synthetic resin coated particle board (YL-Lam) and fibre boards (MDF-Lam). Four different types of fasteners ( metal L, plastic T, metal T and corner fitting ) were used. The test specimens were subjected to compression and tensile testing under static loads, taking into account the critical loads that they could experience under their use. According to the test results, the diagonal compression test moment carrying capacity value; the highest value for the type of fasteners was observed in the test samples combined with the metal L connector, while the lowest value was determined in the test samples combined with the corner fitting. In the diagonal tension of wood-based composite board-connector element type interaction; the highest value was determined in the samples prepared MDF-Lam with the metal L connector, while the lowest value was observed in the test samples prepared YL-Lam with the corner fitting. In the light of these data, the combination of MDF-Lam with metal L connector can be applied to the furniture elements corner joints.

11 April 2026 in Polymers
Verified
Journal Article
Open access
PDF file
HKHacı İsmail KESİK
Hacı İsmail KESİK
Recep AykanRecep Aykan
Recep Aykan
PAPerihan AKBAŞ
Perihan AKBAŞ
This study was carried out to investigate the antimicrobial performance and color stability of silver (Ag)-modified polyurethane and waterborne coating systems applied to Oriental beech (Fagus orientalis L.) wood after the specimens were subjected to UV aging for 24 h. Antimicrobial activity and color stability were evaluated before and after aging against Escherichia coli (E. coli, ATCC 25922), Staphylococcus aureus (S. aureus, NCTC 13552), and Candida albicans (C. albicans) in accordance with the JIS Z 2801 standard. Color changes were determined using CIELab parameters (ΔL*, Δa*, Δb*, and ΔE*) in accordance with the TS EN ISO 16474-3 standard. Prior to UV exposure, the highest antibacterial activity against E. coli occurred in Ag-modified waterborne varnish coatings, whereas the highest antifungal activity against C. albicans occurred in Ag-modified polyurethane paint systems. After UV aging, antimicrobial performance varied depending on the coating type. Particularly, Ag-modified waterborne varnish coatings retained significant antibacterial activity against E. coli and S. aureus and exhibited the highest antifungal performance against C. albicans. Color analysis revealed that UV exposure also caused significant changes in all coating systems. The most pronounced variations were observed for the lightness difference (ΔL*), red–green color difference (Δa*), and yellow–blue color difference (Δb*) parameters, while the lowest total color difference (ΔE*) values were observed for Ag-modified polyurethane and Ag-modified waterborne varnish coatings. Overall, Ag-modified waterborne varnish systems demonstrated superior performance in both antimicrobial activity and color stability after UV aging.