The crystallization process of melt quenched Ge-rich GeSbTe films, with composition optimized for memory applications, has been studied by optical reflectance measurements. The optical properties have been related to the structure and composition by means of the effective medium approximation. The compositional variations have been investigated by transmission electron microscopy and electron energy loss spectroscopy. Amorphous materials prepared by melt-quenching with different laser energy densities have been studied. For the energy density of 1.5 J cm−2, a uniform amorphous layer, with embedded Ge crystalline grains, is obtained. The film exhibits a crystallization temperature of 275 °C and no relevant phase separation during crystallization. For a lower energy density of 1 J cm−2, only half of the film thickness is quenched to the amorphous phase, with Ge depletion. The crystallization temperature of the Ge depleted film is 245 °C, and a partial phase separation occurs.
A facile and universal route for synthesizing transition metal borides has been developed by reaction of boron triiodide (BI 3 ) with elemental transition metals.
Thin-film thermoelectrics (TEs) with a thickness of a few microns present an attractive opportunity to power the internet of things (IoT). Here, we propose screen printing as an industry-relevant technology to fabricate TE thin films from colloidal PbSe quantum dots (QDs). Monodisperse 13 nm-sized PbSe QDs with spherical morphology were synthesized through a straightforward heating-up method. The cubic-phase PbSe QDs with homogeneous chemical composition allowed the formulation of a novel ink to fabricate 2 μm-thick thin films through robust screen printing followed by rapid annealing. A maximum Seebeck coefficient of 561 μV K−1 was obtained at 143 °C and the highest electrical conductivity of 123 S m−1 was reached at 197 °C. Power factor calculations resulted in a maximum value of 2.47 × 10−5 W m−1 K−2 at 143 °C. To the best of our knowledge, the observed Seebeck coefficient value is the highest reported for TE thin films fabricated by screen printing. Thus, this study highlights that increased Seebeck coefficients can be obtained by using QD building blocks owing to quantum confinement.