Shaolan Li

Dr. Shaolan Li

School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA 30313, USA

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
XTXiyuan Tang
Xiyuan Tang
JLJiaxin Liu
Jiaxin Liu
YSYi Shen
Yi Shen
SLShaolan Li
Shaolan Li
LSLinxiao Shen
Linxiao Shen
NSNan Sun
Nan Sun
This paper presents an overview for low-power successive approximation register (SAR) analog-to-digital converters (ADCs). It covers the operation principle, error analysis, and practical design issues. Furthermore, this paper provides a comprehensive survey of state-of-the-art low-power design techniques for every circuit block in the SAR ADC, including comparator, capacitive digital-to-analog converter (DAC), and SAR logic. The goal of this paper is to provide a useful overview to SAR ADC designers who want to improve the energy efficiency targeting low-to-medium speed applications.

9 September 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
XTXiyuan Tang
Xiyuan Tang
XYXiangxing Yang
Xiangxing Yang
WZWenda Zhao
Wenda Zhao
CHChen-Kai Hsu
Chen-Kai Hsu
JLJiaxin Liu
Jiaxin Liu
NSNan Sun
Nan Sun
This article presents a second-order noise-shaping (NS) successive approximation register (SAR) analog-to-digital converter (ADC) with a process, voltage, and temperature (PVT)-robust closed-loop dynamic amplifier. The proposed closed-loop dynamic amplifier combines the merits of closed-loop architecture and dynamic operation, realizing robustness, high accuracy, and high energy-efficiency simultaneously. It is embedded in the loop filter of an NS SAR design, enabling the first fully dynamic NS-SAR ADC that realizes sharp noise transfer function (NTF) while not requiring any gain calibration. Fabricated in 40-nm CMOS technology, the prototype ADC achieves an SNDR of 83.8 dB over a bandwidth of 625 kHz while consuming only 107 μW. It results in an SNDR-based Schreier figure-of-merit (FoM) of 181.5 dB.

15 October 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
SLShaolan Li
Shaolan Li
BQBo Qiao
Bo Qiao
MGMiguel Gandara
Miguel Gandara
DPDavid Z. Pan
David Z. Pan
NSNan Sun
Nan Sun
The noise-shaping successive approximation register (NS-SAR) analog-to-digital converter (ADC) is an emerging hybrid architecture that achieves high resolution and power efficiency simultaneously by combining the merits of the SAR ADC and the ΔΣ ADC. Most prior works adopting the cascaded integrator feed-forward (CIFF) structure demonstrate inefficiency in realizing optimized noise transfer function (NTF). This paper presents a second-order NS-SAR ADC employing the error-feedback (EF) structure to realize complex NTF zeros for noise-shaping enhancement with the minimum modification to a standard SAR. It implements a low-power scaling-friendly EF path by using a passive finite impulse response (FIR) and a comparator-reused dynamic amplifier with process-voltage-temperature (PVT) tracking background calibration. Fabricated in 40-nm CMOS, the prototype chip consumes 84 μW when operating at 10 MS/s. The NS-SAR achieves peak Schreier FoM of 178 dB with 79-dB signal to noise and distortion ratio (SNDR) at an oversampling ratio (OSR) of 8.

23 November 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JLJiaxin Liu
Jiaxin Liu
SLShaolan Li
Shaolan Li
WGWenjuan Guo
Wenjuan Guo
GWGuangjun Wen
Guangjun Wen
NSNan Sun
Nan Sun

9 September 2021 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
TWTzu-Han Wang
Tzu-Han Wang
RWRuowei Wu
Ruowei Wu
VGVasu Gupta
Vasu Gupta
XTXiyuan Tang
Xiyuan Tang
SLShaolan Li
Shaolan Li
To design noise-shaping successive approximation register (NS-SAR) analog-to-digital converters (ADCs) with high resolution and good power efficiency, two key bottlenecks need to be addressed. One is to realize a high-order loop filter with low circuit overhead, and the other is to mitigate the thermal noise. This article presents an NS-SAR ADC that synergistically addresses both challenges. To achieve high-order efficiency, it proposes an innovative error feedback-cascaded integrator feedforward (EF-CIFF) structure that realizes third-order noise shaping using only a single amplifier. It combines the merits of both structures, showing improved robustness, and is free of dc offset concern. On reducing the kT/C noise, this work features a sampling kT/C noise cancellation (SNC) technique that reuses the native hardware of the EF-CIFF structure. An open-loop self-quenching floating-inverter dynamic amplifier (FIDA) is used to support all amplification with low noise and power. Prototyped in 65-nm CMOS, this work achieves 84.8-dB signal-to-noise-distortion ratio (SNDR) with 625-kHz bandwidth (BW) (OSR = 8) and 119 $\mu \text{W}$ , leading to 182-dB Schreier Figure of Merit (FoM). It uses only 0.8-pF input capacitance, which is $5\times $ smaller than prior NS-SAR ADCs with similar oversampling ratio (OSR) and SNDR.

30 December 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
WZWenda Zhao
Wenda Zhao
SLShaolan Li
Shaolan Li
BXBiying Xu
Biying Xu
XYXiangxing Yang
Xiangxing Yang
XTXiyuan Tang
Xiyuan Tang
NSNan Sun
Nan Sun
This article presents a capacitively coupled voltage-controlled oscillator (VCO)-based sensor readout featuring a hybrid phase-locked loop (PLL)- $\Delta \Sigma $ modulator structure. It leverages phase-locking and phase-frequency detector (PFD) array to concurrently perform quantization and dynamic element matching (DEM), much-reducing hardware/power compared with the existing VCO-based readouts’ counting scheme. A low-cost in-cell data-weighted averaging (DWA) scheme is presented to enable a highly linear tri-level digital-to-analog converter (DAC). Fabricated in 40-nm CMOS, the prototype readout achieves 78-dB SNDR in 10-kHz bandwidth, consuming 4.68 $\mu \text{W}$ and 0.025-mm 2 active area. With 172-dB Schreier figure of merit, its efficiency advances the state-of-the-art VCO-based readouts by $50\times $ .