This paper presents an overview for low-power successive approximation register (SAR) analog-to-digital converters (ADCs). It covers the operation principle, error analysis, and practical design issues. Furthermore, this paper provides a comprehensive survey of state-of-the-art low-power design techniques for every circuit block in the SAR ADC, including comparator, capacitive digital-to-analog converter (DAC), and SAR logic. The goal of this paper is to provide a useful overview to SAR ADC designers who want to improve the energy efficiency targeting low-to-medium speed applications.
9 September 2020 in IEEE Journal of Solid-State Circuits
This article presents a second-order noise-shaping (NS) successive approximation register (SAR) analog-to-digital converter (ADC) with a process, voltage, and temperature (PVT)-robust closed-loop dynamic amplifier. The proposed closed-loop dynamic amplifier combines the merits of closed-loop architecture and dynamic operation, realizing robustness, high accuracy, and high energy-efficiency simultaneously. It is embedded in the loop filter of an NS SAR design, enabling the first fully dynamic NS-SAR ADC that realizes sharp noise transfer function (NTF) while not requiring any gain calibration. Fabricated in 40-nm CMOS technology, the prototype ADC achieves an SNDR of 83.8 dB over a bandwidth of 625 kHz while consuming only 107 μW. It results in an SNDR-based Schreier figure-of-merit (FoM) of 181.5 dB.
6 March 2019 in IEEE Journal of Solid-State Circuits
This paper presents a low-power and scaling-friendly noise-shaping (NS) SAR ADC. Instead of using operational transconductance amplifiers that are power hungry and scaling unfriendly, the proposed architecture uses passive switches and capacitors to perform residue integration and realizes the path gains via transistor size ratios inside a multi-path dynamic comparator. The overall architecture is simple and robust. Since the noise transfer function is set by component ratios, it is insensitive to process, voltage, and temperature (PVT) variations. Besides the proposed architecture, this paper also presents two new circuit techniques. A tri-level voting scheme is proposed to reduce the comparator noise. It outperforms the majority voting technique by exploiting more information in the comparator output statistics and providing an extra decision level. A dynamic multi-phase clock generator is also proposed to guarantee non-overlapping and support an arbitrary number of phases. A prototype 9-bit NS-SAR ADC is fabricated in a 40-nm CMOS process. It consumes 143 μW at 1.1 V while operating at 8.4 MS/s. Taking advantage of the second-order NS, it achieves a peak SNDR of 78.4 dB over a bandwidth of 262 kHz at the oversampling ratio of 16, leading to an SNDR-based Schreier figure of merit (FoM) of 171 dB.
23 November 2018 in IEEE Journal of Solid-State Circuits
As any analog-to-digital converter (ADC) with a front-end sample-and-hold (S/H) circuit, successive approximation register (SAR) ADC suffers from a fundamental signal-to-noise ratio (SNR) challenge: its sampling kT/C noise. To satisfy the SNR requirement, the input capacitor size has to be sufficiently large, leading to a great burden for the design of the ADC input driver and reference buffer. This article presents an SAR ADC with a kT/C noise-cancellation technique. It enables the substantial reduction of ADC input capacitor size but without the large kT/C noise penalty. It greatly relaxes the requirement for ADC input driver and reference buffer. Built in 40-nm CMOS, a prototype 13-bit ADC has only 240-fF input capacitance and occupies a small area of 0.005 mm². Operating at 40 MS/s, it achieves a 69-dB signal-to-noise-and-distortion ratio (SNDR) across the Nyquist frequency band while consuming 591 μW of power.
18 June 2021 in IEEE Journal of Solid-State Circuits
Noise-shaping (NS) successive approximation register (SAR) analog-to-digital converters (ADCs) using passive loop filters have drawn the increasing attentions owing to their simplicity, low power, zero static current, and PVT robustness. However, prior works show the limited resolution because of two main challenges: the thermal noise and the digital-to-analog converter (DAC) mismatch. This article presents a high-resolution full passive NS SAR ADC. It uses an efficient NS filter architecture that realizes a 4 $\times $ passive gain and the passive summation, significantly reducing the total thermal noise. It also realizes the second-order DAC mismatch error shaping (MES) that is tone-free. A digital prediction is proposed to solve the signal-range loss issue caused by the MES, recovering the ADC input signal range to the full swing. A prototype NS SAR ADC is implemented in 40-nm CMOS process. It measures 90.5-dB signal-to-noise-and-distortion ratio (SNDR) and 94.3-dB dynamic range (DR) over 40-kHz bandwidth without any calibration. It consumes 67.4 $\mu \text{W}$ power from a 1.1-V supply and occupies 0.061 mm 2 area.