Pest control is essential for increasing agricultural production. Agricultural drones with spraying systems for pest control have generated great interest among farmers. However, spraying systems installed on unmanned aerial vehicles, like any other sprayer, can cause damage to the environment due to drift of the agent. Air induction (AI) nozzles are known to produce less drift (e.g., larger spray drops) than other nozzles, but there is a lack of research analyzing their effectiveness in combination with drones. In this study, AI and flat fan nozzles were installed on drones to evaluate their spray and pest control performance. Aerial spraying was conducted on rice and soybeans to measure the coverage and penetration ratio and analyze the crop production as well as the crop damage due to pests and diseases. The drone flight was conducted at an altitude of 3 m and a velocity of 2 m/s. Spray droplets were collected using water-sensitive paper at two heights above the soil surface. The experiments showed that the crop coverage with the AI nozzle was 130% higher than that with the flat fan nozzle. The drift reduction of AI nozzles increased the coverage of spray droplets. But the difference in the penetration ratios, which is the ratio of agents to be delivered inside the crop, was not significant between the nozzles. Also, there was no significant difference in crop yield and pest control efficacy. Consequently, the performance of the AI nozzle did not show differences from that of the XR nozzle, except for coverage. However, the AI nozzle raised less drift, so it should be considered for use in aerial control.
Vespa velutina nigrithorax, a species of hornet, is spreading globally, with increasingly negative effects on human health. To effectively eliminate V. velutina, its nest should be destroyed and its queen removed; however, the nests are difficult to reach. Thus, we analyzed the requirements for a drone-assisted hornet exterminator using field observations and physical tests on a sample hornets’ nest, and based on these, a UAV exterminator equipped with a nest-perforating device (based on an airsoft rifle) and pesticide-spraying system was designed and manufactured. Pesticides and bullets were manufactured using ecofriendly materials. An actuator at the rear of the device adjusted the pitch of the perforator and sprayer, and a monitoring system was installed to aid the operator in targeting. The operating parameters of the UAV exterminator were evaluated in laboratory tests, with a spray distance of 5 m deemed suitable. To evaluate the system’s pest-control performance, several V. velutina nests were targeted in field tests. An insecticidal effect of over 99% was achieved using two pyrethrum-based pesticides (15% pyrethrum extract and 10% pyrethrum extract with additives). In addition, compared to conventional nest-removal methods, the UAV exterminator reduced the work time by 85% and the cost by 54.9%.
The use of unmanned aerial spray systems (UASS) has increased owing to their many advantages. However, studies related to a standardized method to evaluate the spray performance of UASS are lacking. Therefore, in the present study, a quantitative analytical method using a food dye tracer was compared with the image analysis method, and the effects of experimental conditions on spray deposition were assessed. Concordance between the results of quantitative and image analyses was examined. The coverage of water-sensitive paper (WSP) and Medley Velvet (MV) was compared using image analysis. Moreover, the effects of flight altitude and collector height on spray deposition amount and effective spray width were evaluated. The results showed a significant correlation between the deposition and the coverage of MV (R2 = 0.6782, p-level < 0.001). The coverage of MV is different from that of WSP. In addition, the correlation coefficient between the coverage of WSP and that of MV was smaller than the correlation coefficient between depositions and the coverage of MV. Therefore, MV should be used instead of WSP for more accurate analysis. The lower the collector height, the smaller the deposition amount. The effective spray width increased as the distance between the collector and UASS increased, whereas the total deposition amount decreased when the collector was close to the ground. Overall, using a food dye tracer, both quantitative and qualitative analyses can be applied simultaneously, and this method may replace analysis using WSP.
Unmanned aerial spraying systems (UASSs) are widely used today for the effective control of pests affecting crops, and more advanced UASS techniques are now being developed. To evaluate such systems, artificial targets are typically used to assess droplet coverage through image processing. To evaluate performance accurately, high-quality binary image processing is necessary; however, this involves labor for sample collection, transportation, and storage, as well as the risk of potential contamination during the process. Therefore, rapid assessment in the field is essential. In the present study, we evaluated droplet coverage on water-sensitive papers (WSPs) under field conditions. A dataset was constructed consisting of paired training examples, each comprising source and target data. The source data were high-quality labeled images obtained from WSP samples through image processing, while the target data were aligned RoIs within field images captured in situ. Droplet coverage estimation was performed using an encoder–decoder model, trained on the labeled images, with features adapted to field images via self-supervised learning. The results indicate that the proposed method detected droplet coverage in field images with an error of less than 5%, demonstrating a strong correlation between measured and estimated values (R2 = 0.99). The method proposed in this paper enables immediate and accurate evaluation of the performance of UASSs in situ.
Direct seeding has gained prominence as a labor-efficient and environmentally sustainable alternative to conventional transplanting in rice cultivation. In direct seeding systems, early-stage management is crucial for stable seedling establishment, with sowing uniformity measured by seed counts being a critical indicator of success. However, conventional manual seed counting methods are time-consuming, prone to human error, and impractical for large-scale or repetitive tasks, necessitating advanced automated solutions. Recent advances in computer vision technologies and precision agriculture tools, offer the potential to automate seed counting tasks. Nevertheless, challenges such as domain discrepancies and limited labeled data restrict robust real-world deployment. To address these issues, we propose a density estimation-based seed counting framework integrating semi-supervised learning and background augmentation. This framework includes a cost-effective data acquisition system enabling diverse domain data collection through indoor background augmentation, combined with semi-supervised learning to utilize augmented data effectively while minimizing labeling costs. The experimental results on field data from unknown domains show that our approach reduces seed counting errors by up to 58.5% compared to conventional methods, highlighting its potential as a scalable and effective solution for agricultural applications in real-world environments.
Advances in sensor technology have significantly improved the efficiency and precision of agricultural spraying. Unmanned aerial vehicles (UAVs) are widely utilized for applying plant protection products (PPPs) and fertilizers, offering enhanced spatial control and operational flexibility. This study evaluated the performance of an autonomous UAV-based precision spraying system that applies variable rates based on zone levels defined in a prescription map. The system integrates real-time kinematic global navigation satellite system positioning with a proximity-triggered spray algorithm. Field experiments on a rice field were conducted to assess spray accuracy and fertilization efficacy with liquid fertilizer. Spray deposition patterns on water-sensitive paper showed that the graded strategy distinguished among zone levels, with the highest deposition in high-spray zones, moderate in medium zones, and minimal in no-spray zones. However, entry and exit deviations—used to measure system response delays—averaged 0.878 m and 0.955 m, respectively, indicating slight lags in spray activation and deactivation. Fertilization results showed that higher application levels significantly increased the grain-filling rate and thousand-grain weight (both p < 0.001), but had no significant effect on panicle number or grain count per panicle (p > 0.05). This suggests that increased fertilization primarily enhances grain development rather than overall plant structure. Overall, the system shows strong potential to optimize inputs and yields, though UAV path tracking errors and system response delays require further refinement to enhance spray uniformity and accuracy under real-world applications.
About Me
Chun-Gu Lee completed a Ph.D. at Seoul National University and is a postdoctoral researcher in Rural Development Administration.
Chun-Gu Lee completed a Ph.D. at Seoul National University and is a postdoctoral researcher in Rural Development Administration.