Low-cost and easily available natural zeolite is a promising adsorbent for metal ions removal in wastewater treatment. The possibility of using zeolitic tuff from Serbia in the form of Na-enriched natural zeolite (Na-Z) for the adsorption of Pb2+, Zn2+, Cu2+, and Ni2+ ions from wastewater was investigated in the presented paper. The research included Na-Z characterization and determination of adsorption kinetics in individual ion adsorption tests using non-linear pseudo-first-order (PFO), pseudo-second-order (PSO) and mixed-order (MO) kinetic models. The results indicate that the adsorption processes of metal ions on Na-Z are complex processes dominated by multiple rate-limiting mechanisms and best defined by the MO model. The mechanisms of ion diffusion and adsorption to active sites are equally represented in the Pb2+ ions adsorption process. The mechanism of ion diffusion is more pronounced in the Zn2+ ions adsorption process, while in the case of the adsorption of Cu2+ and Ni2+ ions adsorption on the active sites is the main kinetic mechanism. Within the MO model, the PFO rate (external/internal diffusion) and the PSO rate (adsorption on the active sites) were calculated and results were applied to a multicomponent wastewater sample in order to determine and explain the adsorption efficiency in wastewater treatment. The results show that the rate of adsorption of individual metal ions and the efficiency of ion removal from a multicomponent wastewater sample are influenced by several factors including the radius of the hydrated ion and the free energy of hydration. The achieved removal of metal ions by Na-Z is Pb2+ (89%) > Cu2+ (72%) > Zn2+ (61%) > Ni2+ (58%) and defines Na-enriched natural zeolite as an effective adsorbent in wastewater treatment.

Flotation tailings rich in carbonate minerals from the tailings deposit of the copper mine Majdanpek (Serbia) were applied for neutralization of the water taken from the extremely acidic Lake Robule (Bor, Serbia). Tests conducted in Erlenmeyer flasks showed that after neutralization of the lake water to pH 7, over 99% of aluminum (Al), iron (Fe), and copper (Cu) precipitated, as well as 92% of Zn and 98% of Pb. In order to remove residual Mn and Ag, the water was further treated with NaOH. After treatment with NaOH, all concentrations of the metals in the lake water samples were below discharge limits for municipal wastewater according to the national legislation of the Republic of Serbia. The results of this work suggest that mining waste could be used for active neutralization of the acid mine drainage. The use of the mining waste instead of lime could reduce the costs of the active treatment of the acid mine drainage.

The presented study investigates solidification/stabilization process of hazardous heavy metals/arsenic sludge, generated after the treatment of the wastewater from a primary copper smelter. Fly ash and fly ash with addition of hydrated lime and Portland composite cement were studied as potential binders. The effectiveness of the process was evaluated by unconfined compressive strength (UCS) testing, leaching tests (EN 12457-4 and TCLP) and acid neutralization capacity (ANC) test. It was found that introduction of cement into the systems increased the UCS, led to reduced leaching of Cu, Ni and Zn, but had a negative effect on the ANC. Gradual addition of lime resulted in decreased UCS, significant reduction of metals leaching and high ANC, due to the excess of lime that remained unreacted in pozzolanic reaction. Stabilization of more than 99% of heavy metals and 90% of arsenic has been achieved. All the samples had UCS above required value for safe disposal. In addition to standard leaching tests, solidificates were exposed to atmospheric conditions during one year in order to determine the actual leaching level of metals in real environment. It can be concluded that the EN 12457-4 test is more similar to the real environmental conditions, while the TCLP test highly exaggerates the leaching of metals. The paper also presents results of differential acid neutralization (d-AN) analysis compared with mineralogical study done by scanning electron microscopy and X-ray diffraction analysis. The d-AN coupled with Eh-pH (Pourbaix) diagrams were proven to be a new effective method for analysis of amorphous solidified structure.

Acid mine drainage (AMD) is a waste from mining sites, usually acidic, with high concentrations of sulfates and heavy metal ions. This study investigates the AMD neutralization process using fly ash (FA) as an alternative material. Samples of FA from coal-fired power plants in Serbia (“Nikola Tesla” (EF) and “Kostolac” (KOST)) were analyzed and used. The results were compared with the treatment efficiency of commercial neutralization agent (NaOH). The alkaline nature of FA was the basis for use in the treatment process of the extremely acid Lake Robule (pH 2.46), located in the mining areas of eastern Serbia. The optimal S/L ratio for the AMD neutralization process determined for EF was 25 wt.%, and for KOST it was 20 wt.%. The mechanism of the neutralization process was analyzed using the ANC test and PHREEQC program. The element concentrations and pH values in solutions indicated that FA samples could neutralize Lake Robule with more than 99% of Al, Fe, Cu, Zn, and more than 89% of Pb precipitated. Formation of insoluble (oxy)hydroxide forms (Fe³⁺ and Al³⁺ ions) creates favorable conditions for co-precipitation of other trace metals (Cu, Zn, Ni, Pb, and Cd) from AMD, which is further enhanced by cation adsorption on FA particles. FA proved to be a more effective neutralization agent than NaOH due to its adsorption effect, while among the FA samples, KOST was more effective due to the aging process through the carbonization reaction. Using FA as an alternative material is a promising and sustainable method for treating AMD, with economic and environmental benefits.

This paper examines sustainable industrial practices in Serbia, particularly in the mining and energy sector, focusing on the potential of flotation tailings and fly ash, as materials with the largest share in disposed waste in Serbia in 2023 (95%). It highlights the environmental challenges of mining waste and explores innovative approaches to waste management within the circular economy framework. The study analyzes the current state of mining waste in Serbia, particularly in copper mining regions in the east of the country. It discusses the potential for metal recovery from waste and its reuse in various industries. The research also investigates the use of fly ash from thermal power plants as a valuable resource in the construction industry and other sectors. The paper reviews existing initiatives and legislation in Serbia in order to promote sustainable mining practices and waste utilization. By presenting case studies and potential applications, the study demonstrates how implementing circular economy principles in the mining sector can contribute to environmental protection, resource conservation, and economic growth in Serbia. The comprehensive overview of the current state in Serbia provides a solid foundation for establishing a higher degree of circularity in the mining and energy sectors.