Yusuf Alptekin Türkkan

Dr. Yusuf Alptekin Türkkan

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2023 in Metals
Verified
Journal Article
Open access
PDF file
YTYusuf Alptekin Türkkan
Yusuf Alptekin Türkkan
MAMuhammed Aslan
Muhammed Aslan
ATAlper Tarkan
Alper Tarkan
OAOzgur Aslan
Ozgur Aslan
CYCelalettin Yuce
Celalettin Yuce
NYNurettin Yavuz
Nurettin Yavuz
Stainless-steel has become a widely preferred material type in the marine, aerospace, sanitary, industrial equipment, and construction industries due to its superior corrosion resistance, high mechanic properties, high strength, formability, and thermal and electrical conductivity. In this study, a multi-objective optimization method based on grey relational analysis was employed to optimize the fiber laser-cutting parameters of cutting speed, focal position, frequency, and duty cycle. Surface roughness and kerf width, which are the two most important parameters that determine laser-cutting quality, were simultaneously optimized. In order to assign the optimum level of each parameter individually, the Taguchi technique was applied. The cutting surface morphology was examined according to the grey relational grade with a 3D optical profilometer, and maps of the cutting surfaces were created. According to the results achieved using Analysis of Variance (ANOVA), it was seen that the parameters that affected surface roughness and kerf width the most were duty cycle, with a contribution rate of 49.01%, and frequency, with a contribution rate of 31.2%. Frequency was the most important parameter in terms of multiple responses, with a contribution rate of 18.55%. Duty cycle and focal position were the second and third most effective parameters, respectively. It was determined that the optimum parameter values for minimum surface roughness and minimum kerf width that could be obtained with the fiber laser cutting of 20 mm thick AISI 304L (DIN EN 1.4301) material were 310 mm/min cutting speed, −11 mm focal position, 105 Hz frequency, and 60% duty cycle.

21 November 2020 in Computational and Mathematical Methods in Medicine
Verified
Journal Article
Open access
PDF file
Majid NiazkarMajid Niazkar
Majid Niazkar
GTGokcen Eryılmaz türkkan
Gokcen Eryılmaz türkkan
Hamid Reza NiazkarHamid Reza Niazkar
Hamid Reza Niazkar
YTYusuf Alptekin Türkkan
Yusuf Alptekin Türkkan
COVID-19 pandemic has become a concern of every nation, and it is crucial to apply an estimation model with a favorably-high accuracy to provide an accurate perspective of the situation. In this study, three explicit mathematical prediction models were applied to forecast the COVID-19 outbreak in Iran and Turkey. These models include a recursive-based method, Boltzmann Function-based model and Beesham’s prediction model. These models were exploited to analyze the confirmed and death cases of the first 106 and 87 days of the COVID-19 outbreak in Iran and Turkey, respectively. This application indicates that the three models fail to predict the first 10 to 20 days of data, depending on the prediction model. On the other hand, the results obtained for the rest of the data demonstrate that the three prediction models achieve high values for the determination coefficient, whereas they yielded to different average absolute relative errors. Based on the comparison, the recursive-based model performs the best, while it estimated the COVID-19 outbreak in Iran better than that of in Turkey. Impacts of applying or relaxing control measurements like curfew in Turkey and reopening the low-risk businesses in Iran were investigated through the recursive-based model. Finally, the results demonstrate the merit of the recursive-based model in analyzing various scenarios, which may provide suitable information for health politicians and public health decision-makers.

6 November 2019 in Computer Applications in Engineering Education
Verified
Journal Article
Closed access
PDF file
YTYusuf Alptekin Türkkan
Yusuf Alptekin Türkkan
GTGokcen Eryılmaz türkkan
Gokcen Eryılmaz türkkan
HYHamid Yılmaz
Hamid Yılmaz

2 February 2026 in Biomimetics
Verified
Journal Article
Open access
PDF file
MTMehmet Kıvanç TURAN
Mehmet Kıvanç TURAN
ABAltug Bakirci
Altug Bakirci
YTYusuf Alptekin Türkkan
Yusuf Alptekin Türkkan
Fatih KarpatFatih Karpat
Fatih Karpat
The increasing interest in sustainable materials has led to the development of bio-based composites for additive manufacturing applications. This study aimed to investigate the influence of key printing parameters and new-generation infill patterns together on the maximum compressive force of PLA–wood bio-composites produced by Material Extrusion. By optimizing this material, low-cost wood-like products can be produced. New-generation 3D infill patterns (octet, cubic-subdivision, and lightning which is a biomimetic infill pattern) infill densities, printing temperatures, and layer heights were selected as variables/factors, and the Taguchi method was applied for design of the experiment. The signal-to-noise ratio and Analysis of Variance were used to evaluate the statistical significance and contribution of each parameter to the mechanical response. The signal-to-noise ratio indicated that the optimal printing settings were as follows: printing temperature, 205 °C; infill density, 80%; infill pattern, octet; and layer height, 0.2 mm (7123.4 N). ANOVA results showed that infill density was the most significant factor affecting maximum compressive force at 60%, while infill pattern also exhibited a notable effect. According to these results, infill density and infill pattern are the most important factors for achieving high compressive strength. These findings suggest that optimizing infill architecture and density can improve the mechanical performance of PLA–wood composites, also they can offer assistive design guidelines for lightweight and eco-friendly components.

1 January 2025 in Uludağ University Journal of The Faculty of Engineering
Verified
Journal Article
Open access
PDF file
AKAliriza Kaleli
Aliriza Kaleli
YTYusuf Alptekin Türkkan
Yusuf Alptekin Türkkan
The estimation of battery state-of-charge (SOC) in electric or hybrid vehicle has vital importance in the designing process of battery management systems. The state-of-charge estimation is implemented using different modelling approaches, model-based estimators such as Kalman filtering and Luenberger observer and data-driven based modelling techniques like artificial neural network and machine learning methods. This study aimed to develop a battery state-of-charge estimation method and proposed a novel architecture for multiple battery back SOC estimation using an extended learning machine (ELM). The ELM approach is applied considering battery operating conditions using global vehicle driving profiles, New European Driving Cycle and Worldwide harmonized Light vehicles Test Procedure. The performance of the proposed SOC estimation method is evaluated by using statistical criteria (RMSE, R2, MAPE). Consequently, the obtained results show that a data-driven ELM approach with a less complex structure can obtain better performance compared with other advanced estimator methods under different operating conditions.

27 June 2026 in Turkish Journal of Agriculture - Food Science and Technology
Verified
Journal Article
Open access
PDF file
YTYusuf Alptekin Türkkan
Yusuf Alptekin Türkkan
NSNebi SEREN
Nebi SEREN
The proliferation of automation technologies in agriculture has made smart greenhouse systems a prominent research topic at the heart of control engineering, energy efficiency, and digital transformation. The objective of this study is to ascertain the intellectual structure, thematic trends, and collaborative dynamics of the smart greenhouse automation literature through a comparative bibliometric analysis of the Web of Science (WoS) and Scopus databases. In the analyzes made using VOSviewer version 1.6.20, co-authorship relationships between countries, bibliographic connections at the national level, keyword co-occurrence patterns and cooperation networks between authors were examined together. The findings reveal that China and the United States are central to global knowledge production, with both the number of publications and strong connectivity values in both databases. While the data obtained from the WoS database highlights the research trend focusing on control systems and energy optimization, the analysis of the data obtained from the Scopus database shows that Internet of Things (IoT)-based monitoring systems, machine learning applications, and data-driven automation approaches are becoming more and more prominent. Keyword co-occurrence analyses conducted with the same data show that smart greenhouse technologies are concentrated on the axis of energy efficiency and artificial intelligence; indicates a transformation from classical climate control to predictive and adaptive decision support systems. According to the authorship networks analysis, research activities are geographically dispersed, and smart greenhouse automation is evolving from being only a technical engineering subject to a multidimensional research field combined with sustainability and technology-based value creation.