Pyrolysis as a technique of chemical recycling of plastic materials is causing an increasing level of interest as an environmentally and economically acceptable option for the processing of waste materials. Studies of these processes are carried out under different experimental conditions, in different types of reactors and with different raw materials, which makes the comparison of different processes and the direct application of process parameters quite complex. This paper presents the results of investigation of the influence of temperature in the range of 450°C to 525°C, on the yield of the process of pyrolysis of waste plastics mixture, composed of 45% polypropylene, 35% low density polyethylene and 25% high density polyethylene. Also, this paper presents results of the investigation of the effect of the reaction, atintervals of 30-90 [min], on the yield of pyrolysis of the mentioned waste plastics mixture. Research was conducted in a fixed bed pilot reactor, which was developed for this purpose. The results of the research show that at a temperature of 500°C, complete conversion of raw materials was achieved, for a period of 45 [min], with a maximum yield of the pyrolysis oil of 32.80%, yield of the gaseous products of 65.75% and the solid remains of 1.46%. Afurther increase of temperature increases the yield of gaseous products, at the expense of reducing the yield of pyrolysis oil. Obtained pyrolysis oil has a high calorific value of 45.96 [MJ/kg], and in this regard has potential applications as an alternative fuel.

The present review addresses the latest findings and limitations in catalytic pyrolysis for the processing of plastic waste into valuable fuels. Compared to thermal degradation of plastics, catalytic pyrolysis provides better results in regards to the quality of the obtained liquid hydrocarbon fuel. Different types of catalysts can be used in order to improve the thermal degradation of plastics. Some of the most used catalysts are different types of zeolites (HUSY, HZSM-5, H$\beta$), Fluid Catalytic Cracking (FCC), silica-alumina catalysts, or natural clays. There is a need to find affordable and effective catalysts in the aim of achieving commercialization of catalytic pyrolysis of plastic waste. Therefore, this study summarizes and presents the most significant results found in the literature in regards to catalytic pyrolysis. This paper also investigates the symmetry effects of molecules on the pyrolysis process.

Biomass is a fuel with a highly volatile content and due to that, pyrolysis as a part of the combustion process, has a dominant role in the overall process development, as well as on final products and the process efficiency. It is of key importance to investigate the influence of the process parameters; as temperature, furnace/reactor environment, fuel properties, type, particle size, geometry, and the structure of the pyrolysis process has an influence regards the design of the combustion/pyrolysis equipment and the final products of the processes. This paper gives some results of the investigation?s related to this problem, mainly focussing on wooden biomass as the most important biomass type, as well as a comparison with relevant documented literature. Besides that, pyrolysis based technologies are one of the key directions in synthetic fuels production based on biomass. Biomass pyrolysis process parameters are crucial in reactor design as well as the quantity and quality of the final products. This paper provides discussion dedicated to this aspect with a focus on slow pyrolysis, targeting charcoal as the key product, and fast pyrolysis, targeting synthetic gas as the key product.

This paper presents the results of investigations on the pyrolysis of tyre waste in a laboratory fixed-bed batch reactor. The results regarding the influence of either the reaction temperature (425, 450, 475, and 500 °C) and the flow of the inert gas (0, 100, 300, and 500 mL/min) on product yield (referred to as pyrolysis of waste tyres) are also considered and discussed. On the basis of the abovementioned findings, the most appropriate experimental conditions were selected to contribute to a higher yield of pyrolysis oil. The sample of pyrolysis oil obtained from the experiments carried out in the selected optimal conditions (reaction time 120 min, temperature 450 °C and the inert gas flow of 100 mL/min) was subjected to calorimetric and infrared spectroscopy analysis.