The role and effect of stable Ce 4+ centers in Ce-doped LuAG single crystal scintillator is further studied by means of measurements of several optical, luminescence and scintillation characteristics. Two LuAG:Ce single crystal samples are compared: in one of them the dominating Ce 4 + center is stabilized by high concentration Mg 2+ codoping while the other one shows only the presence of stable Ce 3 + center. Tailored (Eu, Mg)-doped LuAG single crystal is also prepared to test the presence and thermal stability of hole traps in the host which affect the timing characteristics of Ce 4+ scintillation cycle, namely its restoration back to 4+ charge state in last step of the cycle. EPR experiment was also employed at Mg- and (Eu, Mg) doped LuAG samples and the signature of the O - hole center stabilized by Mg 2 + ion was clearly obtained.
We report a breakthrough concept for a bulk single crystal as a heavy aluminum perovskite scintillator, where due to bandgap engineering by a balanced Gd admixture in a Lu cation sublattice, the scintillation performance dramatically increases. In an optimized composition of (Lu, Gd)AlO3:Ce (LuGdAP:Ce), the light yield approaches 21,000 phot/MeV, which is close to that of classical but much less dense YAP:Ce and 50% higher than the best LuYAP:Ce reported in the literature. Moreover, contrary to LuYAP:Ce, the LuGdAP host maintains a high effective atomic number close to that of LuAP:Ce (Zeff = 64.9), which is comparable to commercial LSO:Ce. An enormous decrease in afterglow on the millisecond time scale and acceleration in the rise time of the scintillation response further increase the application potential of the LuGdAP host. The related acceleration of the transfer stage in the scintillation mechanism due to diminishing electron trap depths is proven by thermally stimulated luminescence (TSL). Furthermore, we quantitatively characterize and model the energy transfer processes that are responsible for the change in the photoluminescence and scintillation decay kinetics of Ce3+ in the LuGdAP matrix. Such an innovative (Lu, Gd)AP:Ce scintillator will become competitive for use in applications that require heavy, fast, and high light yield bulk scintillators.
We report on a very compact desk-top transmission extreme ultraviolet (EUV) microscope based on a laser-plasma source with a double stream gas-puff target, capable of acquiring magnified images of objects with a spatial (half-pitch) resolution of sub-50 nm. A multilayer ellipsoidal condenser is used to focus and spectrally narrow the radiation from the plasma, producing a quasi-monochromatic EUV radiation (λ = 13.8 nm) illuminating the object, whereas a Fresnel zone plate objective forms the image. Design details, development, characterization and optimization of the EUV source and the microscope are described and discussed. Test object and other samples were imaged to demonstrate superior resolution compared to visible light microscopy. Developments in nanoscience demand tools capable of capturing images with a nanometer spatial resolution beyond the capability of well-known visible light microscopes. Herein, we present the design details, development, characterization and optimization of a very compact desk-top transmission microscope, operating in invisible to an eye radiation from the so called extreme ultraviolet (EUV) range. The apparatus is based on a laser-plasma source coupled with a special type of objective called Fresnel zone plate. It is capable of acquiring magnified images of objects with a spatial resolution of sub-50 nm, approximately 5–10 times better than the spatial resolution of classical visible light microscopes, in a short acquisition time. The main motivation for development of such compact systems operating with EUV radiations is the possibility to get information about thin samples due to the easily absorption of these radiation by solid materials with very small thicknesses, of the order of about 100 nm. Additionally, the employment of such kind of microscopes might open the possibility to perform experiments without necessity to employ large ‘photon facilities’ such as synchrotrons or free electron lasers and could have a huge impact on the speed of nanotechnology development. Imaging results, concerning nanostructures and biomedical samples, are presented and discussed.
The development and demonstration of a table-top transmission soft X-ray (SXR) microscope, using a laboratory incoherent capillary discharge source has been carried out. This Z-pinching capillary discharge water-window SXR source, is a first of its kind to be used for high spatial resolution microscopy at λ = 2.88 nm (430 eV) . A grazing incidence ellipsoidal condenser mirror is used for focusing of the SXR radiation at the sample plane. The Fresnel zone plate objective lens is used for imaging of the sample onto a back-illuminated (BI) CCD camera. The achieved half-pitch spatial resolution of the microscope approaches 100 nm, as demonstrated by the knife-edge test. Details about the source, and the construction of the microscope are presented and discussed. Additionally, the SXR images of various samples, proving applicability of such microscope for observation of objects in the nanoscale, are shown.