Ethylene glycol (EG)-based lubricant was prepared with dissolved organosolv lignin from birch wood (BL) and softwood (SL) biomass. The effects of different lignin types on the rheological, thermal, and tribological properties of the lignin/EG lubricants were comprehensively investigated by various characterization techniques. Dissolving organosolv lignin in EG results in outstanding lubricating properties. Specifically, the wear volume of the disc by EG-44BL is only 8.9% of that lubricated by pure EG. The enhanced anti-wear property of the EG/lignin system could be attributed to the formation of a robust lubrication film and the strong adhesion of the lubricant on the contacting metal surface due to the presence of a dense hydrogen bonding (H-bonding) network. The lubricating performance of EG-BL outperforms EG-SL, which could be attributed to the denser H-bonding sites in BL and its broader molecular weight distribution. The disc wear loss of EG-44BL is only 45.7% of that lubricated by EG-44SL. Overall, H-bonding is the major contributor to the different tribological properties of BL and SL in EG-based lubricants.
NaCl particles were added into Polyetheretherketone (PEEK) and its composites to produce porous PEEK-based materials by washing NaCl away after the high-temperature compression molding process. After that, an ionic liquid was added into the porous materials under vacuum condition. Carbon fibers (CF), as reinforcement, and PTFE, as an internal solid lubricant, were employed to prepare PEEK composites. Tribological properties under dry friction condition were studied on a ring-on-disc tribo-meter. The influence of CF and PTFE on tribological properties was carefully investigated. The results indicated that, in comparison with traditional PEEK composites (CF/PTFE/PEEK), the porous PEEK composites containing ionic liquid showed much better tribological properties. It is found that CF can help PEEK form effective pores to suck in the ionic liquid resulting in a better tribological performance. CF reinforced porous PEEK containing ionic liquid (p-CF/PEEK + IL) demonstrated the lowest friction coefficient (27% of CF/PTFE/PEEK) and the lowest wear loss (only 0.9% of CF/PTFE/PEEK). Long time tribological test revealed that the wear mass loss comes from the running-in period, while its wear is negligible after this period. It is also found that the addition of PTFE has a negative influence on the tribological behaviors, especially under high sliding velocity and applied load.