We show that tunable magnetic thermal hysteresis can be realized for a simple ferrimagnetic CoGd alloy. The magnetization of a Co0.8Gd0.2 alloy shows a bow-tie curve as a function of temperature, which indicates supercooled and superheated phase transitions. The width of the magnetic thermal hysteresis can be tuned by an external magnetic field, with values of 190 K at fields near 100 Oe and values of 20 K near 400 Oe. Experimental results are in reasonable agreement with theoretical calculations.
The first gamma spectra associated with the annihilation of positrons with individual core levels (Cu and Ag ) are presented. The spectra were obtained by measuring the energy of rays time coincident with Auger electrons emitted as a result of positrons annihilating with a selected core level. Relativistic calculations show good agreement with experiment over a limited range of momenta. However, statistically significant differences indicate that the measurements can provide an impetus to new calculations of many body effects in positron-core electrons annihilation.
We have designed and fabricated TiN/SiO2/TiN–HfO2-based new metamaterial microstructures as an absorber of the visible wavelength, in the range of 400–700 nm, with exceptionally high absorption efficiency (>96%) for solar energy harvesting purposes and generation of heat upon absorption of electromagnetic energy. The finite element method-based COMSOL Multiphysics software simulations were used to optimize the structural parameters of the microstructures and visualize the electric field and electromagnetic power loss distribution in the structure. An optimized 2D unit cell of the structure consists of a 4 μm × 160 nm TiN base on a glass substrate covered with a 70 nm thick SiO2 film. A periodic structure of TiN straps (each 90 nm thick and 2 μm wide) is deposited over the SiO2. The straps are capped with a 40 nm thick layer of high-temperature dielectric HfO2 with a periodicity of 4 µm. This unit is symmetric along the other dimension and is repeated periodically along the horizontal direction. Similar optimized parameters were used for 7, 10, and 100 µm periodic structures to investigate the effect of grating structure pitch on the absorption of light. Although these microstructures were optimized for the visible light spectrum, they show absorption efficiency of >92% when integrated over a broadband wavelength spectrum ranging from 400 to 1200 nm. The experimental data show excellent agreement with the simulated results. We observe less than 5% difference between experimental and simulated absorption efficiencies for the investigated microstructures. Furthermore, we should emphasize that, to the best of our knowledge, this is the first study to experimentally report the light to heat conversion in metamaterials with micron-range size patterned structures.
Temperature dependent static magnetic properties of multilayers, grown on SmCo, are experimentally investigated by means of SQUID magnetometry. The system shows an exchange spring behavior above the compensation temperature at which the magnetization of the antiferromagnetically coupled multilayer is zero. Below , a tunable negative coercivity state (inverse hysteresis) appears, due to the coupling between the hard SmCo and soft multilayers, irrespective of whether Co or Gd is proximate to the SmCo. However, for the strongly ferromagnetically coupled Co interface layer, negative coercivity persists over a larger temperature interval. The negative coercivity state vanishes if the coercivity of the SmCo layer is increased by controlling the Cu underlayer thickness.
We present a spectroscopic method which utilizes virtual photons to selectively measure the electronic structure of the topmost atomic layer. These virtual photons are created when incident positrons transition from vacuum states to bound surface states on the sample surface and can transfer sufficient energy to excite electrons into the vacuum. The short interaction range of the virtual photons restricts the penetration depth to approximately the Thomas-Fermi screening length. Measurements and analysis of the kinetic energies of the emitted electrons made on a single layer of graphene deposited on Cu and on the clean Cu substrate show that the ejected electrons originate exclusively from the topmost atomic layer. Moreover, we find that the kinetic energies of the emitted electrons reflect the density of states at the surface. These results demonstrate that this technique will be a complementary tool to existing spectroscopic techniques in determining the electronic structure of 2D materials and fragile systems due to the absence of subsurface contributions and probe-induced surface damage.