Failure under seismic action generally occurs in the form of out-of-plane collapses of walls before reaching their in-plane strength in historical stone masonry buildings. Consistent finite element (FE) macro modeling has emerged as a need for use in seismic assessments of these walls. This paper presents the numerical model calibration of U-shaped multi-leaf stone masonry wall specimens tested under ambient vibrations and out-of-plane (OOP) load reversals. The uncertain elastic parameters were obtained by manual calibration of the numerical models based on ambient vibration test (AVT) data of the specimens. To obtain nonlinear calibration parameters, static pushover analyses were performed on FE models simulating quasi-static tests. The calibrated numerical models matched well with the experimental results in terms of load–drift response and damage distribution. As a result, the modulus of elasticity and tensile and compressive degrading strength parameters of masonry walls were proposed. A parametric study was conducted to examine the effects of different materials and geometric properties (tensile strength, aspect ratio, slenderness ratio, and geometric scale) on the OOP behavior of stone masonry walls. A quite different strain distribution was obtained in the case of a large aspect ratio, while it was determined that the geometric scale had no effect on the strain distribution. Tensile strength was the dominant parameter affecting the load–drift response of the models. Within the presented work, a practical tool for out-of-plane seismic assessment has been proposed for the structures covered in this paper.
T-joints are structural parts of tubular steel skeletal structural systems. The connection of these joints is assembled by seam-welding. The fatigue strength of the seam-welded T-joint is one of the most determinative factors for sustainable performance. Manufacturing-related incomplete-type welding imperfections affect this strength parameter. In this study, the influence of incomplete-type welding imperfection on the fatigue life of tubular T-joint is investigated for the different loading conditions with the equivalent structural stress-based approach. A total of 7 numerical models are established, including a reference model of a tubular T-joint and its variants with incomplete welding imperfections in the crown and saddle regions. Each numerical model is subjected to 14 static analyses including combinations of axial tension, in-plane bending, and out-of-plane bending loads. The results are evaluated in terms of fatigue life and the location of the damage. It is demonstrated that incomplete welding causes a decrease in the fatigue life and a change of location of the fatigue.