The main objective of this paper is to investigate the tracking (signal reproduction) capability of the UCSD-NEES shake table system through a series of broadband and harmonic experiments with different tuning and test amplitudes. The second objective is to obtain quantitative relations between different measures of the signal reproduction error and the amplitude of the reference excitation used to tune the shake table controller. These relations can be used as guidelines in planning of future seismic tests on the UCSD-NEES shake table or on large shake tables with similar controllers. The third objective is to evaluate the effectiveness of the existing iterative correction/tuning procedure for the UCSD-NEES shake table. The final objective of the paper is to propose some improvements to the current shake table tuning practice.
1 April 2019 in Journal of Performance of Constructed Facilities
This paper presents modal parameter estimation work on a steel railway bridge at three different temperature conditions using ambient vibration test data. The bridge was built at the end of the 19th century using the available technology of its time. It is composed of six spans, each 30 m long, with a total length of 180 m. It is slightly curved in the horizontal plane with a radius of 300 m, and has a vertical grade of 2.5%. Modal parameters of the bridge were estimated using two different output-only system identification methods. The identified results obtained under different temperature conditions were compared in assessing the effects of temperature variation in the identification results. A comparative study in assessing method-to-method and test-to-test variability was also conducted. A three-dimensional finite-element model of the bridge was developed. In order to match the experimentally obtained modal parameters with the numerical ones, a trial-and-error–based model updating study was conducted. This way, a benchmark model of the 199+325 steel railway bridge was obtained for future capacity assessment, prediction, and sensitivity-based model updating work.
27 July 2022 in Journal of Civil Structural Health Monitoring
Purpose: The reliable and continuous operation of wind turbines is of utmost importance, making it necessary to thoroughly understand their dynamic behavior under various operational and environmental conditions. Methods: To achieve this, a data acquisition system distributed throughout the tower height is designed. The system records data such as the acceleration, temperature, and relative humidity from the sensors, along with the rotor speed, wind speed, temperature, pitch angle, nacelle direction, and wind direction from the data acquisition system of the turbine. The acquired data is synchronized and processed by Autonomous and Continuous System Identification system based on the poly-reference Least Squares Complex Frequency method. The extensive dataset, gathered over a 7-month period, allows for the estimation of modal parameters of the wind turbine. The modal parameters are then correlated with the operational and environmental conditions that were recorded. The relationships between these conditions are thoroughly analyzed and explained. Additionally, the operational principles of the wind turbine are elucidated in detail. The correlations between the modal parameters and operational or environmental factors are presented and interpreted, shedding light on the complex interplay between wind turbine dynamics and external conditions. Conclusion: It can be said that changes in operational and environmental conditions affect the modal parameters of the wind turbine differently across various structural modes. Without considering these effects, structural health monitoring systems may produce false alarms. Failure to consider these effects in the development of structural health monitoring systems may lead to incorrect damage alarms.
30 July 2021 in Earthquake Engineering & Structural Dynamics