A new strategy to obtain multicolor lasing from cholesteric liquid crystals is presented. A four layer cell is prepared with three different cholesteric layers and a layer containing a photoluminescent dye. The three cholesteric mixtures are prepared so that their photonic band gaps are partially overlapped. Through this combination, two laser lines are obtained in the same spot under the pumping beam irradiation. Eventually, one of the laser lines can be switched off if an electric field is applied to the first or the last cholesteric layer.
We investigate the laser emission from a polymer–cholesteric liquid crystal superstructure with coexisting opposite chiralities fabricated by refilling a right-handed polymeric scaffold with a left-handed cholesteric liquid crystalline material. The superstructure exhibits two photonic band gaps corresponding to the right- and left-circularly polarized light. By adding a suitable dye, dual-wavelength lasing with orthogonal circular polarizations is realized in this single-layer structure. The wavelength of the left-circularly polarized laser emission is thermally tunable, while the wavelength of the right-circularly polarized emission is relatively stable. Due to its relative simplicity and tunability characteristics, our design might have broad application prospects in various fields of photonics and display technology.
Polymer-stabilized cholesteric liquid crystals (PSCLCs) have emerged as promising candidates for one-dimensional photonic lattices that enable precise tuning of the photonic band gap (PBG). This work systematically investigates the effect of polymer concentrations on the AC electric field-induced tuning of the PBG in PSCLCs, in so doing it explores a range of concentrations and provides new insights into how polymer concentration affects both the stabilization of cholesteric textures and the electro-optic response. We demonstrate that low polymer concentrations (≈3 wt. %) cause a blue shift in the short wavelength band edge, while high concentrations (≈10 wt. %) lead to a contraction and deterioration of the reflection band. Polarization optical microscopy was conducted to confirm the phase transition induced by the application of an electric field. The observations confirm that increased polymer concentration stabilizes the cholesteric texture. Particularly, the highly desired fingerprint texture was stabilized in a sample with 10 wt. % of the polymer, whereas it was unstable for lower polymer concentrations. Additionally, higher polymer concentrations also improved the dissymmetry factor and stability of the lasing emission, with the dissymmetry factor reaching the value of around 2 for samples with 10 wt. % of polymer additive. Our results provide valuable comprehension into the design of advanced PSCLC structures with tunable optical properties, enhancing device performance and paving the way for innovative photonic applications.
Liquid crystals with high dielectric anisotropy, low operational thresholds, and significant birefringence (Δn) represent a key focus in soft matter research. This work introduces a novel series of hydrogen-bonded liquid crystals (HBLCs) derived from 4-n-alkoxybenzoic, 4-alkoxy-3-fluorobenzoic derivatives (nOBAF), 4-alkoxy-2,3-fluorobenzoic derivatives (nOBAFF), and 2-fluoro-4-nitrobenzoic acid. The HBLCs were characterized using Fourier transform infrared spectroscopy, and their thermal behavior was evaluated via differential scanning calorimetry. Optical observations were conducted using polarized optical microscopy. The results indicate that mixtures containing benzoic acid with a bilateral fluorine substituent exhibit both SmA and SmC phases, while those with a unilateral fluorine substituent exhibit nematic and SmA phases. Moreover, an increase in the length of the alkoxy chain results in an expanded mesophase temperature range. This study demonstrates that the presence of a fluorine substituent and the incorporation of an NO2 group in the molecular structure result in an increase in dielectric permittivity, DC conductivity, dielectric anisotropy, and birefringence.
Hydrogen-bonded liquid crystals (HBLC) formed by mixing 4-alcyloxy-2-fluorobenzoic acid (nOBAF) and the 4-pentyl-4-biphenylcarbonitrile (5CB) at (1:1), (1:3) and (3:1) (mol/mol) ratios have been investigated. Four HBLC series are prepared by changing the carbon chain length from 7 to 10 designated 5CB/nOBAF. The fluorobenzoic acids (nOBAF) are the proton donors while the pyridine unit (5CB) is the proton acceptors. Thermal behaviour and phase diagrams of the individual series have been established using differential scanning Calorimetry (DSC) and polarising optical microscopy (POM). It was found that all complexes exhibit nematic (N) and smectic G (SmG) phases. For the nematic phase, the dielectric anisotropy was increased while the thresholds voltage was decreased. This can be explained by the strong longitudinal dipole moment of the nematic phase compared to the nOBAF compounds. Furthermore, as the alkoxy chain length increases, the birefringence, response time, rotational viscosity, and splay elastic constant all decrease by the way of the reduction of the order parameter for the longer chains. In addition, hydrogen-bonded proton transfer between cyano and carboxylic acid groups have been explored by Fourier transform infrared spectroscopy (FTIR) for the first time. GRAPHICAL ABSTRACT
Two-color lasing emission from an asymmetric structure, consisting of two dye-doped cholesteric liquid crystal (DD-CLC) layers separated by a transparent interlayer, is demonstrated. The DD-CLC mixtures have different reflection bands with long-wavelength band edges located at the green and red wavelengths of the visible spectrum, respectively. For the laser action, the CLC hosts provide the feedback, and the fluorescent laser dyes represent the active medium. When the stacked structure is optically pumped above the threshold, two simultaneous laser lines separated by 123 nm are observed at the long-wavelength band edges of the DD-CLC mixtures. The influence of an electric field on lasing behavior is also analyzed and discussed in terms of the reflection spectrum and laser action. The results show a reversible tuning of the reflection band, accompanied by a modification of the lasing characteristics under the application of an external field. Above a specific threshold voltage, one of the emission lines is suppressed and the other is conserved. With a further increase in the voltage, both laser emissions are entirely inhibited. The investigated structure demonstrates a simple technique to obtain an electrically tunable multi-wavelength laser, which might pave the way for a new generation of organic laser sources.