Eduardo Nuno Borges Pereira

Prof. Eduardo Nuno Borges Pereira

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2012 in Cement and Concrete Research
Verified
Journal Article
Closed access
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
GFGregor Fischer
Gregor Fischer
JBJoaquim António Oliveira de Barros
Joaquim António Oliveira de Barros

1 November 2012 in Cement and Concrete Composites
Verified
Journal Article
Closed access
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
GFGregor Fischer
Gregor Fischer
JBJoaquim António Oliveira de Barros
Joaquim António Oliveira de Barros

1 August 2008 in Journal of Structural Engineering
Verified
Journal Article
Closed access
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
JBJoaquim António Oliveira de Barros
Joaquim António Oliveira de Barros
Aires CamõesAires Camões
Aires Camões
Over the last few decades, the astonishing developments of superplasticizers technology allowed great achievements in the conception of concrete mixes exhibiting self-compacting ability. Since the 1980s, some methodologies have been proposed to achieve self-compacting requirements in fresh concrete mixes, based on the evaluation of the flowing properties of these mixes. There still persist, however, some doubts about the most appropriate strategy to define the optimum composition of a self-compacting concrete (SCC) mix, based on a required performance. The behavior of SCC as a structural material can be improved if adequate steel fiber reinforcement is added to SCC mix composition. In fact, the fiber-reinforcement mechanisms can convert the brittle behavior of this cement-based material into a pseudoductile behavior up to a crack width that is acceptable under the structural design point of view. Fiber addition, however, increases the complexity of the mix design process, due to the strong perturbation effect that steel fibers cause on fresh concrete flow. In the present work, a mix design method is proposed to develop cost effective and high performance steel fiber-reinforced self-compacting concrete (SFRSCC). The material properties of the developed SFRSCC are assessed as well as its potentiality as a structural material, carrying out punching and flexural tests on panel prototypes. A material nonlinear analysis is carried out, aiming to address the possibility of calibrating the constitutive model parameters by obtaining, with an inverse analysis, the fracture parameters using force-deflection relationships recorded in simpler laboratory tests, such as the three-point notched beam bending test. The contribution of steel fibers for punching resistance is also discussed.

1 September 2015 in Construction and Building Materials
Verified
Journal Article
Open access
JAJoão A.P.P. Almeida
João A.P.P. Almeida
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
JBJoaquim António Oliveira de Barros
Joaquim António Oliveira de Barros
The development of novel strengthening techniques to address the seismic vulnerability of masonry elements is gradually leading to simpler, faster and more effective strengthening strategies. In particular, the use of fabric reinforced cementitious matrix systems is considered of great potential, given the increase of ductility achieved with simple and economic strengthening procedures. To assess the effectiveness of these strengthening systems, and considering that the seismic action is involved, one important component of the structural behaviour is the in-plane cyclic response. In this work is discussed the applicability of the diagonal tensile test for the assessment of the cyclic response of strengthened masonry. The results obtained allowed to assess the contribution of the strengthening system to the increase of the load carrying capacity of masonry elements, as well as to evaluate the damage evolution and the stiffness degradation mechanisms developing under cyclic loading.This research was carried in the framework of InoTec, Innovative material of ultra-high 16 ductility for the rehabilitation of the built patrimony, funded by COMPETE/QREN/FEDER 17 (NORTE-07-0202-FEDER-023024). InoTec project is promoted by CiviTest company 18 and University of Minho. S&P Clever Reinforcement Ibérica is gratefully acknowledged 19 for providing the materials used in the strengthening of the masonry specimens

1 April 2007 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
JBJoaquim António Oliveira de Barros
Joaquim António Oliveira de Barros
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
SSSimão Santos
Simão Santos
When the benefits of self-compacting concrete (SCC) are added to those resulting from the addition of discrete steel fibers to cement based materials, a high performance material, designated as steel fiber-reinforced self-compacting concrete (SFRSCC), is obtained. The present work is part of a research project that was conducted to develop a lightweight precasting SFRSCC panel for building façades. The SFRSCC mix design strategy and the experimental research conducted to characterize the bending and the compression behavior of SFRSCC at ages ranging from 12h to 28 days are presented. A particular effort is made to assess the SFRSCC postcracking behavior, carrying out three point notched beam bending tests. The equivalent and the residual flexural tensile strength parameters, proposed by RILEM TC 162-TDF to characterize the toughness of steel fiber reinforced concrete, are determined for the designed SFRSCC. To evaluate the stress-crack opening diagram of the designed SFRSCC, an inverse analysis is performed, fitting the experimentally obtained force-deflection curves. The influence of the age on the SFRSCC fracture parameters is analyzed. SFRSCC prototype panels were tested to assess their flexural and punching resistance.

1 September 2017 in Composites Part B: Engineering
Verified
Journal Article
Open access
Luis CorreiaLuis Correia
Luis Correia
Jose Sena-CruzJose Sena-Cruz
Jose Sena-Cruz
JMJulien Michels
Julien Michels
PFPaulo França
Paulo França
EPEduardo Nuno Borges Pereira
Eduardo Nuno Borges Pereira
GEGonçalo Escusa
Gonçalo Escusa
Over the last decades, researchers have been studying fibre reinforced polymer (FRP) materials and their advantages in retrofitting of existing structures. The externally bonded reinforcement (EBR) technique is the most common practice in improving existing reinforced concrete (RC) structures with carbon FRP (CFRP) materials. In this regard, several additional advantages have been reported to the use of prestressed CFRP materials, mainly strips. However, the experience with RC strengthening using prestressed EBR-CFRP materials is still limited. Some concerns regarding the efficiency of the technique still exist, especially the durability and the long-term behaviour. This work aims at contributing to the knowledge on durability of RC slabs strengthened with prestressed CFRP laminate strips according the EBR technique. The durability was studied by exposing strengthened RC specimens to the following environments for approximately 8 months: (i) reference environment – specimens kept in a climatic chamber at 20 ºC; (ii) water immersion in tank at 20 ºC of temperature; (iii) water immersion in tank with 3.5% of dissolved chlorides at 20 ºC of temperature; and (iv) wet/dry cycles in a tank with a water temperature of 20 ºC. Additionally, half of the specimens were subjected to sustained loading at a load level of 1/3 of the ultimate load, with the occurrence of cracking. After the exposure period the slabs were monotonically tested up to failure by using a four-point bending test configuration. The results showed that the environmental conditions and the sustained loading, separately or combined, led in general to slight losses of performance and ductility. Although these losses were subtle, considering that the tests were carried out for 8 months, clear indications are given towards the importance of conducting similar tests for longer periods. The results obtained showed that the procedures implemented to assess the durability of the strengthening systems were sensitive to the most relevant deterioration mechanisms and their impact on the mechanical properties of the specimens. Therefore, these procedures may well contribute for the future establishment of standardized test programmes for the assessment of the durability of prestressed CFRP strengthening systems.This work was supported by the following programs: FEDER (European Funds for Regional Development) funds through the Operational Program for Competitiveness Factors – COMPETE, Operational Program for Competitiveness and Internationalization (POCI) and National Funds through FCT - Portuguese Foundation for Science and Technology under the projects FRPreDur FCOMP-01-0124-FEDER-028865 (FCT reference PTDC/ECM-EST/2424/2012), FRPLongDur POCI-01-0145-FEDER-016900 (FCT reference PTDC/ECM-EST/1282/2014) and POCI-01-0145-FEDER-007633. The authors also like to thank all the companies that have been involved supporting and contributing for the development of this study, mainly: S&P Clever Reinforcement Ibérica Lda, S&P Clever Reinforcement Company (Switzerland), Tecnipor - Gomes & Taveira Lda., Vialam – Indústrias Metalúrgicas e Metalomecânicas, Lda, Hilti Portugal-Produtos e Serviços, Lda. The first author wish also to acknowledge the grant SFRH/BD/98309/2013 provided by FCT. This paper is dedicated to Tiago Teixeira (1988–2015), former doctoral student at the ISISE R&D Research Centre at the University of Minho.info:eu-repo/semantics/publishedVersio