In this paper, a short-gate tunneling-field-effect-transistor (SG-TFET) structure has been investigated for the dielectrically modulated biosensing applications in comparison with a full-gate tunneling-field-effect-transistor structure of similar dimensions. This paper explores the underlying physics of these architectures and estimates their comparative sensing performance. The sensing performance has been evaluated for both the charged and charge-neutral biomolecules using extensive device-level simulation, and the effects of the biomolecule dielectric constant and charge density are also studied. In SG-TFET architecture, the reduction of the gate length enhances its drain control over the band-to-band tunneling process and this has been exploited for the detection, resulting to superior drain current sensitivity for biomolecule conjugation. The gate and drain biasing conditions show dominant impact on the sensitivity enhancement in the short-gate biosensors. Therefore, the gate and drain bias are identified as the effective design parameters for the efficiency optimization.
6 May 2016 in IEEE Transactions on Electron Devices
Dielectrically modulated tunnel FET (DMTFET)-based biosensors show higher sensitivity but lower subthreshold current compared with their dielectrically modulated FET counterpart. In this context, the effect of use of silicon-germanium (SiGe) source and n + -pocket-doped channel is investigated with the help of extensive device-level simulations. This paper explores the underlying physics of germanium composition variation in the source region, and doping concentration variation in n + -pocket region, from the perspective of biomolecule conjugation. The effects of source bandgap and tunneling length over the band-to-band tunneling component have been analyzed, and, subsequently, the sensing performance of DMTFETs has been estimated. The results show that SiGe-source DMTFET has significant superiority over n + -pocket DMTFET for attaining higher subthreshold current level while retaining acceptable sensitivity. Such sensitivity-current optimization has been studied for different gate and drain biases, and the suitable biasing range of operation has been indicated. In addition, the relative efficiency of SiGe source and n + -pocket-doped channel has been studied under different biomolecule sample specifications. Finally, the influence of trap-assisted tunneling on DMTFET sensing performance has been analyzed, and the comparative role of SiGe source and n + pocket has also been indicated in this context.
16 November 2022 in npj 2D Materials and Applications
The continuously intensifying demand for high-performance and miniaturized semiconductor devices has pushed the aggressive downscaling of field-effect transistors (FETs) design. However, the detrimental short-channel effects and the fundamental limit on the sub-threshold swing (SS) in FET have led to a drastic increase in static and dynamic power consumption. The operational limit of nanoscale transistors motivates the exploration of post-CMOS devices like Tunnel FET (TFET), having steeper SS and immunity toward short channel effects. Thus the field of nanoscale 2D-TFET has gained compelling attention in recent times. The nanoscale TFET, with two-dimensional (2D) semiconductor materials, has shown a significant improvement in terms of higher on-state current and lower sub-threshold swing. In this context, the review presented here has comprehensively covered the gradual development and present state-of-arts in the field of nanoscale 2D-TFET design. The relative merits and demerits of each class of 2D materials are identified, which sheds light on the specific design challenges associated with individual 2D materials. Subsequently, the potential device/material co-optimization strategies for the development of efficient TFET designs are highlighted. Next, the experimental development in 2D-TFET design is discussed, and specific synthesis/fabrication challenges for individual material systems are indicated. Finally, an extensive comparative performance study is presented between the simulated as well as experimentally reported potential 2D materials and state-of-the-art bulk material-based TFETs.
In this work, a Diagonal Tunneling Dielectrically Modulated Tunnel Field Effect Transistor (DT-DMTFET) architecture is proposed for label-free bio-sensing application. The performance of this sensor architecture is comprehensively investigated with the help of extensive numerical device simulations. The architecture has been carefully engineered to exploits the diagonal band to band tunneling (BTBT) component in favor of bio-molecule detection. The essential physics of the transduction mechanism for lateral tunneling, vertical tunneling, and diagonal tunneling-based DMTFETs is extensively analyzed from device electrostatics and transport mechanisms. The transduction efficiency of the sensor devices is quantitatively assessed in terms of current sensitivity, where DT-DMTFET exhibits a sensitivity of 3590 compared to 2514 and 1550 observed in lateral tunneling (LT) and vertical tunneling (VT) dominated DMTFETs, respectively. The optimum sensitivity of DT-DMTFET is observed at 4V and 0.4 V gate and drain biases ranges of operation, where the same is observed at a gate bias of 5V and 7V for LT- and VT- DMTFET, respectively. Furthermore, the device design aspects are studied in detail to identify the relevant structural parameters and subsequently optimize the sensing performance of the DT-DMTFET. Finally, an extensive comparative performance study establishes that the DT-DMTFETs offer more than 50% and 100 % improvements in the current sensitivity compared to their lateral and vertical tunneling-based counterparts, respectively, over a range of bio-molecule sample specifications.
27 September 2022 in Materials Science in Semiconductor Processing
The rapidly increasing demand for energy storage has been consistently driving the exploration of different materials for Li-ion batteries, where the olivine lithium-metal phosphates (LiMPO4) are considered one of the most potential candidates for cathode-electrode design. In this context, the work presents an extensive comparative theoretical study of the electrochemical and electrical properties of iron (Fe)-, cobalt (Co)-, manganese (Mn)-, chromium (Cr)-, and vanadium (V)-based LiMPO4 materials for cathode design in lithium (Li)-ion battery applications, using the density-functional-theory (DFT)-based first-principle-calculation approach. The work emphasized different material and performance aspects of the cathode design, including the cohesive energy of the material, Li-intercalation energy in olivine structure, and intrinsic diffusion coefficient across the Li channel, as well as equilibrium potential and open-circuit potential at different charge-states of Li-ion batteries. The results indicate the specification of the metal atom significantly influences the Li diffusion across the olivine structure and the overall energetics of different LiMPO4. In this context, a clear correlation between the structural and electrochemical properties has been demonstrated in different LiMPO4. The key findings offer significant theoretical and design-level insight for estimating the performance of studied LiMPO4-based Li-ion batteries while interfacing with different application areas.