The use of innovative higher-performance highly reactive resin systems requires an enhancement of the established method of fiber impregnation (open bath) towards closed resin-injection pultrusion (CIP), due to the short pot life of the resin systems. The result is that the open bath is developed into a closed injection and impregnation chamber (“ii-chamber”). In this study, three parameters—resin viscosity, opening angle and opening factor at the injection point on the ii-chamber—are varied, each in three stages. For each set of parameters, a pultrusion trial is conducted and the process pressures in the ii-chamber and pultrusion die measured. This enables direct feedback via the process conditions of the as yet uncured composite. The data obtained are used to validate a newly developed simulation model. The model is based on Darcy’s law, which has been extended to take fiber movement into account and thus represent the resulting pressure increase in the die. The flexible ii-chamber and die concept enhance our understanding of the processes taking place in the die system. The sensitivity of the process pressures can be shown for the three influencing variables. The experiment shows that of the three influencing variables investigated, viscosity has the greatest sensitivity to pressure development. In general, it can be said that over the length of the pultrusion die system, the pressure level increases across the three measuring points.
13 January 2026 in The International Journal of Advanced Manufacturing Technology
Molded micro-structured parts offer specific enhanced functionalities and are of great relevance for a variety of technical products. The capabilities of micro-molding processes regarding achievable micro-scale feature dimensions have been lately shifted towards the submicro-metric length scale. Beside other factors, the most recent achievements are particularly related to the modification of the mold surface condition. Even though physical vapor deposited (PVD) metallic nitride hard coatings offer the potential to facilitate mold filling and to enhance part demolding, these coatings are still rarely considered as mold surface material. In traditional mold making, coating deposition onto the mold is the final step (indirect-processing). Alternatively, micro-scale features can be directly fabricated into PVD hard coatings (direct-processing) by exploiting the capabilities of micro-manufacturing. The materials and methods applied in mold manufacturing of micro-structured PVD hard coated molds directly affect their use in plastic injection molding of micro-structured surfaces. To present a state-of-the-art review on these two overarching topics, a keyword-based literature search has been carried out on research fields 1) precision mold manufacturing, 2) surface engineering, 3) direct-processing of hard coatings and 4) plastic (micro-)molding. For each research field, the state of the art is reviewed. The findings are mutually discussed with respect to manufacturing and potential use, and directions for future research are indicated. Lastly, a concept for the manufacturing of multi-level micro-structured mold is introduced. Molds realized in this manner can potentially be used for the molding of hierarchical micro-structured or multiscale structured parts, which offer a further enhanced or supplemented functionality.