The development of novel nanomaterials as highly efficient gas-sensing materials is envisaged as one of the most important routes in the field of gas-sensing research. However, developing stable, selective, and efficient materials for these purposes is a highly challenging task requiring numerous design attempts. In this work, a ZrO2/Co3O4 composite is reported, for the first time, as a gas-sensing material for the detection of ethanol. The sensitive and selective detection of ethanol gas at 200 °C has been demonstrated for the ZrO2/Co3O4 (0.20 wt%/0.20 wt%)-based sensor. Furthermore, the sensor showed a very low response/recovery time of 56 s and 363 s, respectively, in response to a pulse of 20 ppm of ethanol and good stability. The interesting gas-sensing property of ZrO2/Co3O4 can be ascribed to both the porous structure, which facilitates the interaction between the target gas and the sensing site, and the p–p-junction-induced built-in electric field. These results indicate that the ZrO2/Co3O4 composite can serve as a heterostructured nanomaterial for the detection of ethanol gas.
In the present work, a study was carried out with the aim of enhancing the performance of electrochemical biosensors based on Co3O4:Fe2O3 heterojunctions. Specifically, the redox behavior of screen–printed carbon electrodes (SPCEs) modified with Co3O4:Fe2O3 (0.5 wt%:x wt%) nanocomposites, where x ranged from 0.1 to 0.5 wt%, was examined in detail. The hybrid nanocomposites were synthesized using the sol-gel auto-combustion method. Several characterization methods were performed to investigate the morphology, microstructure, and surface area of the pure Co3O4, pure Fe2O3, and the synthesized Co3O4:Fe2O3 nanocomposites. Using cyclic voltammetry (CV) tests, the electrochemical behavior of the modified electrodes toward the dopamine (DA) molecules was investigated. The modified Co3O4:Fe2O3, (0.5 wt%, x = 0.4 wt%)/SPCE resulted in a sensor with the best electrochemical performance toward DA. A high linear relationship between DA concentrations and the faradic current variation (ipa (μA) = 0.0736 + 0.1031 CDA (μA) and R2 = 0.99) was found in the range of 10–100 μM. The sensitivity value was computed to be 0.604 µA µM−1cm−2 and the limit of detection (LOD) 0.24 µM. Based on the characterization and electrochemical results, it can be suggested that the formation of Co3O4:Fe2O3 heterostructures provides a large specific surface area, an increased number of electroactive sites at the metal oxide interface and a p–n heterojunction, thus ensuring a remarkable enhancement in the electrochemical response towards DA.
This paper describes the preparation of Co3O4/CuO composites with vary CuO contents (Co3O4/CuO = 1.0wt%/0.50–1.0wt%) using a simple sol–gel process. According to SEM analysis, the composite samples exhibit a round-like morphology. XRD analysis revealed the formation of CuxCoyOz mixed oxide nanostructures. The composite materials were tested as thick films in conductometric devices for ammonia gas sensing at the optimal temperature of 150 °C. The response of Co3O4/CuO (1.0wt%/1.0wt%) composite was found much higher compared to pure Co3O4 and CuO NPs, suggesting that a synergic interaction occurs between the two metal oxide components in improving ammonia gas sensing capability. According to the findings reported, the design of Co3O4/CuO composite heterojunctions by the simple sol–gel process adopted might be an effective way to increase gas sensing toward ammonia gas at mild temperature.
12 October 2023 in Journal of Materials Science: Materials in Electronics
In the present work, multiwalled carbon nanotube (MWCNT)/zinc oxide (ZnO) nanoparticles at pH 6.0, 7.0, 8.0, and 10.0 were prepared through the coprecipitation method to improve the antibacterial activity. Morphological, structural, and optical analysis, such as Fourier transform infrared spectroscopy, X‐ray diffraction, and field emission scanning electron microscopy, was used to investigate the formation of composites. Analysis revealed that there were variations in morphology from agglomerated structures to rod‐like then flower‐like structures as pH varied from 6.0 to 10.0. The MWCNT/ZnO composite enhanced the antibacterial activity especially for Staphylococcus aureus as a maximum 20 mm zone of inhibition was observed. The data presented in the present study proves that such composites are an efficient antibacterial agent and suitable for therapy for severe infections.
Metal oxide-based sensors have the benefit of inexpensive, quick response, and high sensitivity in detecting specific biological species. In this article, a simple electrochemical immunosensor was fabricated using antibody-chitosan coated silver/cerium oxide (Ab-CS@Ag/CeO2) nanocomposites on a gold electrode for sensitive alpha-fetoprotein (AFP) diagnosis in human serum samples. Successfully synthesis of AFP antibody-CS@Ag/CeO2 conjugates was confirmed through Fourier transform infrared spectra of the prototype. The amine coupling bond chemistry was then used to immobilize the resultant conjugate on a gold electrode surface. It was observed that the interaction of the synthesized Ab-CS@Ag/CeO2 nanocomposites with AFP prevented an electron transfer and reduced the voltammetric Fe(CN)63−/4− peak current, which was proportional to the amount of AFP. The linear ranges of AFP concentration were found from 10−12–10−6 g.ml−1. The limit of detection was calculated using the calibration curve and came out to be 0.57 pg.ml−1. The designed label-free immunosensor successfully detected AFP in human serum samples. As a result, the resulting immunosensor is a promising sensor plate form for AFP detection and could be used in clinical bioanalysis.