Simona Crispi

Dr. Simona Crispi

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2022 in Sensors
Verified
Journal Article
Open access
PDF file
SCSimona Crispi
Simona Crispi
Giovanni  NeriGiovanni Neri
Giovanni Neri
In the present study, the development of a conductometric gas sensor based on Al,Ca-doped zinc oxide composite which is finalized to the detection of formaldehyde (HCHO) at a low concentration in air is investigated. The electrical and sensing properties of the composite based on ZnO doped with different loadings of Al and/or Ca (from 0 up to 5 at%) were evaluated. The gas-sensing mechanism of Al,Ca-doped zinc oxide nanocomposite-based sensors was also discussed. The optimized 3%Al,3%Ca-ZnO sensor displayed a formaldehyde response of 3.5 (@ 4 ppm HCHO/air) and an experimental low detection limit of 125 ppb HCHO/air, at the operating temperature of 400 °C. The sensor was also shown to be selective to HCHO with respect to many interferent indoor gases, but NO2 changed the baseline resistance in an opposite way compared to the target gas. The developed device for monitoring HCHO in indoor and workplace environments has the advantage of a simple planar structure and can be easily fabricated for mass production by using low-cost materials and easy fabrication methods.

9 November 2023 in Physica Scripta
Verified
Journal Article
Open access
PDF file
MKMadiha Khan
Madiha Khan
AFAngelo Ferlazzo
Angelo Ferlazzo
SCSimona Crispi
Simona Crispi
MHMozaffar Hussain
Mozaffar Hussain
Giovanni  NeriGiovanni Neri
Giovanni Neri
This paper describes the preparation of Co3O4/CuO composites with vary CuO contents (Co3O4/CuO = 1.0wt%/0.50–1.0wt%) using a simple sol–gel process. According to SEM analysis, the composite samples exhibit a round-like morphology. XRD analysis revealed the formation of CuxCoyOz mixed oxide nanostructures. The composite materials were tested as thick films in conductometric devices for ammonia gas sensing at the optimal temperature of 150 °C. The response of Co3O4/CuO (1.0wt%/1.0wt%) composite was found much higher compared to pure Co3O4 and CuO NPs, suggesting that a synergic interaction occurs between the two metal oxide components in improving ammonia gas sensing capability. According to the findings reported, the design of Co3O4/CuO composite heterojunctions by the simple sol–gel process adopted might be an effective way to increase gas sensing toward ammonia gas at mild temperature.

20 February 2024 in ACS Applied Nano Materials
Verified
Journal Article
Closed access
RZRayhane Zribi
Rayhane Zribi
SCSimona Crispi
Simona Crispi
DGDaniele Giusi
Daniele Giusi
MZMedet Zhukush
Medet Zhukush
CAClaudio Ampelli
Claudio Ampelli
Giovanni  NeriGiovanni Neri
Giovanni Neri

3 August 2024 in Next Materials
Verified
Journal Article
Open access
MKMadiha Khan
Madiha Khan
MHMozaffar Hussain
Mozaffar Hussain
SCSimona Crispi
Simona Crispi
SRSaima Rafique
Saima Rafique
RARizwan Akram
Rizwan Akram
Giovanni  NeriGiovanni Neri
Giovanni Neri

16 June 2025 in Small
Verified
Journal Article
Open access
VSViviana Scuderi
Viviana Scuderi
RTRita Turnaturi
Rita Turnaturi
SFSimona Filice
Simona Filice
SCSimona Crispi
Simona Crispi
GNGiuseppe Di Natale
Giuseppe Di Natale
Silvia ScaleseSilvia Scalese
Silvia Scalese
Alzheimer's disease (AD) is a neurodegenerative disorder with a high negative impact in terms of cost and social issues. New kinds of noninvasive, reliable, easy‐to‐use, and cheap biosensors are highly desired. In this work, the use of graphene oxide (GO) sheets functionalized with the peg 4 ‐KLVFF peptide conjugate is reported as a sensing layer for the detection of Aβ 42 protein, a key AD biomarker. An optimized synthetic protocol provides a suitable GO/peptide‐functionalized layer without extensively modifying the planar structure of GO. The nature of the bonds involved in the functionalization process is highlighted through Fourier Transform Infrared Spectroscopy (FTIR) and X‐ray photoelectron spectroscopy (XPS) analyses. The covalently functionalized material (GO@peg 4 ‐KLVFF) is deposited by dielectrophoresis (DEP) between two metal electrodes, forming the sensitive layer. The devices show a selective and linear electrical response as a function of Aβ 42 concentrations. The selectivity toward Aβ 42 is validated using two different scrambled sequences of the amyloid‐β peptides (Aβ 42s , Aβ 40s ) as well as the Tau 26–44 peptide. The different electrical behaviors are discussed in detail and explained by simulating, at the molecular level, the interaction of the different Aβ peptides with GO and KLVFF. Potential chemical interactions are explored, including charge transfer between the peptides and GO.

11 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SCSimona Crispi
Simona Crispi
Simona FiliceSimona Filice
Simona Filice
VSViviana Scuderi
Viviana Scuderi
MZMassimo Zimbone
Massimo Zimbone
Daniela IannazzoDaniela Iannazzo
Daniela Iannazzo
Silvia ScaleseSilvia Scalese
Silvia Scalese
Nowadays, nitrate ions and azo dyes are a significant source of water pollution due to their high toxicity, persistence, and potential to be carcinogenic. Both contaminants are the result of anthropogenic sources, such as sewage or industrial wastewater discharge; the first one results also as a consequence of the intensive use of fertilizers. In this work we report the use of a new quaternized pentablock copolymer (PTBr) for the removal of nitrate ions and methyl orange (MO) dye from water by adsorption processes. Morphological, chemical, and thermal properties of the pentablock copolymer were investigated, respectively, by scanning electron microscopy (SEM), Attenuated Total Reflectance Infrared Spectroscopy (ATR-FTIR) (FT-IR), and X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC) analyses. Anionic removal ability and adsorption rate in water solutions containing either a single contaminant species or a mix of the two contaminants were studied by UV–VIS absorbance spectroscopy as a function of time and initial concentration. The presence of imidazole groups confers on PTBr a positive charge and a hydrophilic character that are responsible for an effective removal of anions from water. PTBr film reports an adsorption efficiency of 10.15 mg/g for nitrate removal and this value is in line with others reported in the literature. In the case of the simultaneous presence of nitrate and MO, it is found that nitrate ions removal is slightly affected by the presence of the dye, since both contaminants compete for electrostatic interaction with imidazole groups. On the contrary, the dye removal does not show significant change with or without the presence of nitrate ions, probably due to other kinds of interaction that it can establish with the polymer surface (π-π interaction). The adsorption process and the related mechanisms are described using kinetic and isothermal models. Despite a certain reduction in the adsorption efficiency for one of the investigated contaminants, the results confirm the possibility of using the quaternized pentablock copolymer for the co-adsorption of both inorganic and organic anions.