This article a synthesis of humic acid with the obtaining of potassium humate based on coal waste from the Lenger deposit. Accumulated industrial waste heavily pollutes the environment and has a direct impact on all living things. The accumulation of waste in landfills increases the pollution level of the atmosphere, soil, groundwater, and surface water, destroys the functioning of ecosystems, and damages agriculture and construction. A sieve analysis was carried out to study the fine fractions of coal waste, and a scanning electron microscope analysis was performed to study the mineralogical, structural state and X-ray chemical phase composition. The chemical composition of coal waste was studied using differential thermal analysis during heat treatment. The optimal parameters of the process for obtaining humic acids are established, and the results of experimental work are presented. The results are confirmed by mathematical planning of the experiment using the method of orthogonal plan of the second order. The mathematical planning results were tested according to the Student and Fischer criteria. Based on the conducted studies, it was identified that the degree of extraction of humic acid reaches up to 95.90% in terms of the organic phase, and the concentration of humic acid is 49.13%. From the humic acids obtained using potassium hydroxide, potassium humate was synthesized. The potassium humate obtained in its composition has fertilizer properties. Therefore, the obtained potassium humate will be used for the production of humic fertilizers to improve soil fertility and crop yields. The synthesis of humic acids with the production of potassium humate is aimed at reducing the accumulated industrial waste, which in turn allows you to regulate and improve the ecological situation and green ecology in the region.

This article discusses the method of obtaining phosphorus-containing components from cottrel dust from the industrial wastes of the New-Jambul phosphorus plant. Accumulated industrial waste heavily pollutes the environment and has a direct impact on all living things. Therefore, their processing is of special interest for the state and grant programs have been allocated in order to obtain new valuable substances. In order to solve these problems, a number of experimental works have been carried out to study the chemical and mineralogical composition and chemical structures during the heat treatment of cottrel dust—the waste of phosphorus production. The optimal parameters of the process of obtaining mono-calcium phosphate from cottrel dust were determined and the process of crystallization of mono-calcium phosphate was studied. A method has been developed for obtaining a phosphorus-containing fertilizer based on cottrel dust from the industrial waste of the New-Jambul phosphorus plant by means of sulfuric acid solutions. The advantage of the resulting phosphorus-containing fertilizer is that it has a high solubility and digestibility of phosphorus plants. They are also high in phosphorus-containing substances that ensure the growth and yield of agricultural plants. The developed method for obtaining phosphorus-containing fertilizers is aimed at reducing the accumulated industrial waste, which in turn allows you to regulate and improve the environmental situation in the region.

This paper presents a technology for applying copper and silver films to cotton fabrics by combining photochemical and chemical methods for the reduction of the compounds of these metals. The resulting metal-containing films have inherent electrical conductivity of metals. All the main processes described in the work were carried out by means of the compounds being sorbed by the surface of the fabric when they were wetted in appropriate solutions. The aim of the work was to study the application of electrically conductive composite copper films on cotton fabrics. The tasks to achieve this aim were to perform scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis to confirm that as a result of the experiment, CuCl with a semiconductor ability was formed on the surface of the sample. The driving force behind the photochemical reduction of copper and silver halides on cotton surfaces is that, as a result of the photooxidation of cellulose molecules in the fabric, copper monochloride is first formed on the cotton surface. Subsequently, the process of obtaining silver particles based on semiconductor silver chloride obtained as a result of the transformation of copper monochloride was carried out. The physicochemical and photochemical processes leading to the formation of monovalent copper chloride, which provides sufficient adhesion to the substrate, are considered. It is shown that in this case, the oxidation of monovalent copper also occurs with the formation of soluble salts that are easily removed by washing. Since the proposed technology does not require special equipment, and the chemical reagents used are not scarce, it can be used to apply bactericidal silver films to various household items and medical applications in ordinary laundries or at home. This article examines an affordable and simple technology for producing metal films on a cotton surface due to the presence of disadvantages (time duration, high temperature, scarce reagents, special installations, etc.) of a number of well-known methods in the production of chemical coatings.