An all-optical quartz-enhanced photoacoustic spectroscopy system (QEPAS) with quadrature point stabilization for trace gas detection was reported. The extrinsic interferometry-based optical fiber Fabry–Perot sensor with quadrature point self-stabilization for detection of quartz prong vibration was used to replace the conventional one. The optimal coefficient of the modulation depth was ∼2.2 theoretically and experimentally, corresponding to the modulation depth of ∼0.1795 cm −1 at an acetylene (C 2 H 2 ) absorption line of 6534.36 cm −1 . Furthermore, the enhancement of QEPAS signal was obtained by using different microresonators. The minimum detectable limit of ∼580 parts per billion by volume (ppbv) was obtained. A normalized noise equivalent absorption coefficient for C 2 H 2 of 2.95 × 10 −7 cm −1 ·W·Hz –1/2 was obtained. The detection sensitivity was enhanced by a factor of ∼2.1 in comparison to the conventional QEPAS system. The linear correlation coefficient of the QEPAS signal response to the C 2 H 2 concentration was 0.998 within the range from 10 parts per million by volume (ppmv) to 500 ppmv. Finally, the long-term stability of the QEPAS system was evaluated using Allan deviation analysis, and the ultimate detection limit of ∼130 ppbv was reached for an optimum averaging time of ∼108 s at atmospheric pressure and ambient temperature.
22 December 2012 in International Journal of Thermophysics
To solve the problem of multiple sound recognition in the application of Sagnac optical fiber acoustic sensing system, a multi-source synchronous recognition algorithm was proposed, which combined the VMD (variational modal decomposition) algorithm and MFCC (Mel-frequency cepstral coefficient algorithm) algorithm to pre-process the photoacoustic sensing signal, and uses BP neural network to recognize the photoacoustic sensing signal. The modal analysis and feature extraction theory of photoacoustic sensing signal based on the VMD and MFCC algorithms were presented. The signal recognition theory analysis and system recognition program design were completed based on the BP neural network. Signal acquisition of different sounds and verification experiments of the recognition system have been carried out in a laboratory environment based on the Sagnac fiber optic sound sensing system. The experimental results show that the proposed optical fiber acoustic sensing signal recognition algorithm has a simultaneous recognition rate better than 96.5% for six types of sounds, and the optical acoustic signal recognition takes less than 5.3 s, which has the capability of real-time sound detection and recognition, and provides the possibility of further application of the Sagnac-based optical fiber acoustic sensing system.
Dynamic photothermal-mechanical response of a tri-material microcantilever illuminated by an intensity modulated laser source is theoretically analyzed using the heat dynamic differential model and finite element model based on the COMSOL 5.0. Tri-material microcantilever samples are fabricated by transferring carbon nanotube film onto a silicon microcantilever with aluminum coating. During the experiment, these samples are illuminated by an intensity-modulated laser pulse, and the maximum photothermal response frequency is . Experimental results are consistent with theoretical analyses. The photothermal spectroscopy detection of water vapor in the open environment is carried out, and the linear correlation coefficient between spectroscopy signal and water concentration is 0.997. Experimental results demonstrated the feasibility of tri-material microcantilever as a thermal sensor for photothermal deflection spectroscopy.
31 January 2024 in Microwave and Optical Technology Letters
Measuring the vibration displacement of the fuel pin is crucial for determining the vibration level and monitoring the condition of the fuel pin and assembly. A miniaturized displacement sensor based on the fiber Fabry–Perot (F–P) was designed and fabricated, and the overall cylindrical dimensions of the encapsulated fiber F–P sensor were 30 mm × 6.5 mm. Its working principle, characteristics, and structure parameters were analyzed in detail. Experimental results showed that the measurement range of displacements was up to approximately 1250 μm in humid environment. And the root mean squared error values of ~0.112 and ~0.144 showed that the sensor worked well in humid and high‐temperature environments. Experimental results indicated that the developed F–P sensor, featuring compact dimensions and high performance, had significant application value and great potential for monitoring the vibration and accessing the damage of the fuel pins.