jianjun chen

Dr. jianjun chen

China West Normal University, Nanchong, Sichuan, China
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JJJianan Jiao
Jianan Jiao
JCjianjun chen
jianjun chen
NWNing Wang
Ning Wang
JZJie Zhang
Jie Zhang
YZYong Zhu
Yong Zhu
This paper proposes a fiber optic Fabry-Perot (F-P) strain sensing system using non-scan correlation demodulation applied to the health monitoring of the pressurized water reactor’s fuel assembly structures. The structural design and sensing mechanism analysis of the sensor were carried out, and the strain transfer model from the fuel sheet to the strain gauge was established. After the sensor fabrication and installation, the static tests have been conducted, and the results indicate that the sensing system can accurately measure the microstrain with a sensitivity of up to 12.6 nm/με at a high temperature (300 °C). The dynamic testing shows that the sensing system has a good frequency adaptation at 10–500 Hz. Thermal-hydraulic experiments show that the sensing system can run stably in a nuclear reactor, with high temperature, high pressure, and high-velocity flow flushing; additionally, the consistency deviation of the measured data is less than 1.5%.

8 December 2023 in IEEE Transactions on Consumer Electronics
Verified
Journal Article
Closed access
HZHao Zheng
Hao Zheng
YCYihong Chen
Yihong Chen
YLYanchun Li
Yanchun Li
ZWZiyi Wang
Ziyi Wang
JCjianjun chen
jianjun chen
XZXiaolin Zhu
Xiaolin Zhu
Human Activity Recognition (HAR) has attracted much attention due to the application in consumer electronics. To address the shortcomings of existing HARs, such as no identification, privacy leakage, battery maintenance, low accuracy, and few recognized activities, we have proposed new bound-RFID HARs. Firstly, we have devised body RFID skeleton to sense human activity by collecting tag response records of the skeleton node, which form the human activity dataset suitable for a benchmark. Secondly, we propose data standardization to solve the problem caused by the differences in the size and the amount of the tag response signal feature data. Thirdly, some body RFID skeleton-based HARs are proposed by utilizing machine learning, recurrent neural networks, and graph convolutional networks. In these proposed HARs, the best HAR is an improvement on the state-of-the-art HAR in the computer vision. The experimental results show that the proposed best HAR improves 0.27% than the state-of-the-art HAR by utilizing RSSI, Phase, and Doppler Frequency with only 4.5MB parameters, and achieves a recognition accuracy of 98.52%. Therefore, the devised body RFID skeleton effectively senses human activities, and the proposed HAR recognizes human activities with high accuracy and fine granularity. The dataset and source code are available at http://www.cwnuiot.net/BRS/.

26 October 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JCjianjun chen
jianjun chen
JWJiang Wang
Jiang Wang
NWNing Wang
Ning Wang
JRJuan Ruan
Juan Ruan
JZJie Zhang
Jie Zhang
YZYong Zhu
Yong Zhu
An improved acoustic pick-up is presented to enhance the acoustic sensing sensitivity of the straight line-type Sagnac fiber optic acoustic sensing system. A hollow elastomer cylinder is introduced into the system, and the optical fiber is tightly wound around the cylinder to construct the pick-up. The theoretical analysis was finished, and it showed that the improved pick-up will bring in an extra phase change and let the phase difference increase almost an order. The extra phase change will enhance the sensing sensitivity correspondingly. The titanium alloy elastic cylinder was designed and manufactured. The experiment system was built, and a sinusoidal acoustic signal was used as the sound source. The tests were taken during 100–1500 Hz, and the experimental study showed that the sensitivity was more than 130 mV/Pa when the pick-up was used as the acoustic sensing element, and compared to the fiber only system, the sensitivity was enhanced more than 71.2%. The improved pick-up will be helpful in sound recognition and expand the application area of the Sagnac acoustic sensing system.

11 January 2023 in Photonics
Verified
Journal Article
Open access
PDF file
JWJiang Wang
Jiang Wang
RTRuixi Tang
Ruixi Tang
JCjianjun chen
jianjun chen
NWNing Wang
Ning Wang
YZYong Zhu
Yong Zhu
JRJuan Ruan
Juan Ruan
A straight-line-type Sagnac optic fiber acoustic sensing system is proposed in this paper to adopt the application needs of no man’s plateau borderline for monitoring mechanical invasion. The Sagnac interference fiber loop is replaced by a straight-line fiber and a 1 × 2 coupler, and the length of the Sagnac interference fiber loop is shortened by close to 50%. The influences of delay fiber and sensing fiber on the sensing system are analyzed by theory calculation and simulation and the optimal lengths of delay fiber and sensing fiber were decided. The experiment system was set, and the sensing fiber was wound into titanium alloy cylinder to compose the sensing element. Experimental results show that the sensing system has a good response to 50−8000 Hz and 70 dB sinusoidal acoustical signals and can well distinguish the signals of different frequencies. Using a small-scale helicopter audio signal as the acoustical signal, the test results show that the response curve is consistent with the simulation results and the sensitivity reaches 30.67 mV/Pa.

1 September 2023 in Photonics
Verified
Journal Article
Open access
PDF file
XZXinyu Zheng Zheng
Xinyu Zheng Zheng
RTRuixi Tang
Ruixi Tang
JWJiang Wang
Jiang Wang
CLCheng Lin
Cheng Lin
JCjianjun chen
jianjun chen
JRJuan Ruan
Juan Ruan
To solve the problem of multiple sound recognition in the application of Sagnac optical fiber acoustic sensing system, a multi-source synchronous recognition algorithm was proposed, which combined the VMD (variational modal decomposition) algorithm and MFCC (Mel-frequency cepstral coefficient algorithm) algorithm to pre-process the photoacoustic sensing signal, and uses BP neural network to recognize the photoacoustic sensing signal. The modal analysis and feature extraction theory of photoacoustic sensing signal based on the VMD and MFCC algorithms were presented. The signal recognition theory analysis and system recognition program design were completed based on the BP neural network. Signal acquisition of different sounds and verification experiments of the recognition system have been carried out in a laboratory environment based on the Sagnac fiber optic sound sensing system. The experimental results show that the proposed optical fiber acoustic sensing signal recognition algorithm has a simultaneous recognition rate better than 96.5% for six types of sounds, and the optical acoustic signal recognition takes less than 5.3 s, which has the capability of real-time sound detection and recognition, and provides the possibility of further application of the Sagnac-based optical fiber acoustic sensing system.

1 January 2013 in Chinese Optics Letters
Verified
Journal Article
Closed access
JCjianjun chen
jianjun chen
YZYong Zhu Yong Zhu
Yong Zhu Yong Zhu
BLBo Liu Bo Liu
Bo Liu Bo Liu
WWWei Wei Wei Wei
Wei Wei Wei Wei
NWNing Wang Ning Wang
Ning Wang Ning Wang
JZJie Zhang Jie Zhang
Jie Zhang Jie Zhang
We propose a new Fourier transform spectrometer based on programmable microelectromechanical systems (MEMS) micro-mirror and an improved Michelson interferometer. The principle of the spectrometer is theoretically analyzed. A signal acquisition unit and an experimental set-up are designed. The spectrum of the polychromatic light source is obtained at a slantwise reflector angle of 0.238o. The spectrum is analyzed by this system within the near infrared. The experimental results show that the spectral accuracy is less than 3 nm, and the signal-to-noise ratio (SNR) is 18 dB. The spectral resolution is less than 16 nm.