The need for high‐speed local area networks to meet the recent developments in multimedia and video transmission applications has recently focused interest on visible light communication (VLC) systems. Although VLC systems provide lighting and communications simultaneously from light emitting diodes (LEDs), LEDs, the uplink channel design in such a system is a challenging task. In this study, the authors propose a solution in which the uplink challenge in indoor VLC is resolved by the use of an infrared (IR) link. The authors introduce a novel fast adaptive beam steering IR system (FABS‐IR) to improve the uplink performance at high data rates while providing security for applications. The goal of the authors’ proposed system is to enhance the received optical power signal, speed up the adaptation process and mitigate the channel delay spread when the system operates at a high transmission rate. The channel delay spread is minimised from 0.22 ns given by hybrid diffuse IR link to almost 0.07 ns. At 2.5 Gb/s, the authors’ results show that the imaging FABS‐IR system accomplished about 11.7 dB signal to noise ratio in the presence of multipath dispersion, receiver noise and transmitter mobility.

In this paper, we introduce a new adaptive optical wireless system that employs a finite vocabulary of stored holograms. We propose a fast delay, angle, and power adaptive holograms (FDAPA-Holograms) approach based on a divide and conquer (D&C) methodology and evaluate it with angle diversity receivers in a mobile optical wireless system. The ultimate goal is to increase the signal-to-noise ratio (SNR), reduce the effect of inter-symbol interference, and eliminate the need to calculate the hologram at each transmitter and receiver location. A significant improvement is achieved in the presence of demanding background illumination noise, receiver noise, multipath propagation, mobility, and shadowing typical in a realistic indoor environment. The combination of beam delay, angle, and power adaptation offers additional degrees of freedom in the link design, resulting in a system that is able to achieve higher data rates (5 Gb/s). At a higher data rate of 5 Gb/s and under eye safety regulations, the proposed FDAPA-Holograms system offers around 13 dB SNR with full mobility in a realistic environment where shadowing exists. The fast search algorithm introduced that is based on a D&C algorithm reduces the computation time required to identify the optimum hologram. Simulation results show that the proposed system, FDAPA-Holograms, can reduce the time required to identify the optimum hologram position from 64 ms taken by a classic adaptive hologram to about 14 ms.

This study aimed to prepare silicone rubber composites with heavy metal oxide nanoparticles for gamma ray shielding applications. Different heavy metal oxide nanoparticles were incorporated into the silicone rubber matrix, and the prepared composites were characterized for their thermal, mechanical, and radiation shielding properties. The density of the prepared SR samples ranged from 1.25 to 2.611 g·cm⁻³, with SR-2 having the highest density due to the presence of lead oxide. Additionally, the thermal stability of the materials improved with the addition of HMO nanoparticles, as indicated by TGA results. The prepared SR materials showed ultimate deformation displacement ranging from 14.17 to 21.23 mm, with the highest value recorded for SR-3 and the lowest for SR-2. We investigated the transmission factor (TF) of gamma rays through silicone rubber (SR) composites with different heavy metal oxide (HMO) nanoparticles. The addition of HMOs resulted in a decrease in TF values, indicating improved radiation shielding performance. The TF was found to be lowest in SR-5, which contained 15% of Bi₂O₃, WO₃, BaO, and Zr₂O₃ each. The linear attenuation coefficient (LAC) of the SR samples was also evaluated, and it was found that the incorporation of HMOs increased the probability of photon interactions, leading to improved radiation protection effectiveness. The half-value layer (HVL) of the SR samples was also examined, and it was found that the addition of HMOs resulted in a significant reduction in HVL values, particularly at low energy levels. SR-5 had the lowest HVL among the group, while SR-2, SR-3, and SR-4 had higher HVL values. These results demonstrate the effectiveness of using HMOs in enhancing the radiation shielding properties of SR composites, particularly for low-energy gamma rays.

This paper presents a novel circularly polarized rectenna designed for efficient electromagnetic energy harvesting at the 2.45 GHz ISM band. A compact antenna structure is designed to achieve high performance in terms of radiation efficiency, axial ratio, directivity, effective area, and harmonic rejection over the entire bandwidth of the ISM frequency band. The optimized rectifier circuit enhances the RF harvested energy efficiency, with an AC-to-DC conversion efficiency ranging from 36% to 70% for low-level input power ranging from −10 dBm to 0 dBm. The stable output of DC power confirms the suitability of this design for various practical applications, including wireless sensor networks, energy harvesting power supplies, medical implants, and environmental monitoring systems. Experimental validation, which includes both the reflection coefficient and radiation patterns of the designed antenna, confirms the accuracy of the simulation. The study found that the proposed energy harvesting system has a high total efficiency ranging from 53% to 63% and is well-suited for low-power energy harvesting (0 dBm) from ambient electromagnetic radiation. The proposed circularly polarized rectenna is a competitive option for efficient electromagnetic energy harvesting, both as a standalone unit and in an array, due to its high performance, feasibility, and versatility in meeting various energy harvesting requirements. This makes it a promising and cost-effective solution for various wireless communication applications, offering great potential for efficient energy harvesting from ambient electromagnetic radiation.

This paper presents the generation and characterization of femtosecond pulses utilizing graphene-polymethyl-methacrylate (PMMA) thin-film saturable absorber (SA), which is subjected to different lengths of single-mode fiber (SMF) in an erbium-doped fiber laser cavity. The graphene/PMMA-SA is prepared by using a simple transfer procedure of the thin-film on a fiber ferrule. By increasing the SMF length from 0 to 4 m, the corresponding group velocity dispersion of the entire cavity is estimated to change from −0.033 to −0.121 ps². Analysis of the pulse performance shows that the pulse width behavior varies from 820 fs to 710 fs against different cavity lengths. Similarly, the pulse repetition rate and the spectral bandwidth can be adjusted from 12.5 to 10.0 MHz, and from 8.2 to 5.6 nm, respectively. A comprehensive discussion on the pulse performance is presented, which can contribute to widening the knowledge on the operation of graphene-based soliton mode-locked erbium-doped fiber lasers based on dispersion management by controlling the cavity length.