Aden Hodzic

Dr. Aden Hodzic


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
KJKrunoslav Juraić
Krunoslav Juraić
PDPavo Dubček
Pavo Dubček
Mario BohačMario Bohač
Mario Bohač
Andreja GajovićAndreja Gajović
Andreja Gajović
SBSigrid Bernstorff
Sigrid Bernstorff
Davor GracinDavor Gracin
Davor Gracin
Fluorine-doped tin oxide thin films (SnO2:F) are widely used as transparent conductive oxide electrodes in thin-film solar cells because of their appropriate electrical and optical properties. The surface morphology of these films influences their optical properties and therefore plays an important role in the overall efficiencies of the solar cells in which they are implemented. At rough surfaces light is diffusely scattered, extending the optical path of light inside the active layer of the solar cell, which in term improves light absorption and solar cell conversion efficiency. In this work, we investigated the surface morphology of undoped and doped SnO2 thin films and their influence on the optical properties of the films. We have compared and analysed the results obtained by several complementary methods for thin-film surface morphology investigation: atomic force microscopy (AFM), transmission electron microscopy (TEM), and grazing-incidence small-angle X-ray scattering (GISAXS). Based on the AFM and TEM results we propose a theoretical model that reproduces well the GISAXS scattering patterns.

12 February 2023 in Molecules
Verified
Journal Article
Open access
PDF file
KVKatarina Vojisavljević
Katarina Vojisavljević
Slavica Savić RužićSlavica Savić Ružić
Slavica Savić Ružić
MPMilica Počuča-Nešić
Milica Počuča-Nešić
AHAden Hodzic
Aden Hodzic
MKManfred Kriechbaum
Manfred Kriechbaum
VDVelјko R. Djokić
Velјko R. Djokić
Developing highly efficient semiconductor metal oxide (SMOX) sensors capable of accurate and fast responses to environmental humidity is still a challenging task. In addition to a not so pronounced sensitivity to relative humidity change, most of the SMOXs cannot meet the criteria of real-time humidity sensing due to their long response/recovery time. The way to tackle this problem is to control adsorption/desorption processes, i.e., water-vapor molecular dynamics, over the sensor’s active layer through the powder and pore morphology design. With this in mind, a KIT-5-mediated synthesis was used to achieve mesoporous tin (IV) oxide replica (SnO2-R) with controlled pore size and ordering through template inversion and compared with a sol-gel synthesized powder (SnO2-SG). Unlike SnO2-SG, SnO2-R possessed a high specific surface area and quite an open pore structure, similar to the KIT-5, as observed by TEM, BET and SWAXS analyses. According to TEM, SnO2-R consisted of fine-grained globular particles and some percent of exaggerated, grown twinned crystals. The distinctive morphology of the SnO2-R-based sensor, with its specific pore structure and an increased number of oxygen-related defects associated with the powder preparation process and detected at the sensor surface by XPS analysis, contributed to excellent humidity sensing performances at room temperature, comprised of a low hysteresis error (3.7%), sensitivity of 406.8 kΩ/RH% and swift response/recovery speed (4 s/6 s).

17 November 2020 in Materials
Verified
Journal Article
Open access
PDF file
KJKrunoslav Juraić
Krunoslav Juraić
Davor GracinDavor Gracin
Davor Gracin
Matija ČuloMatija Čulo
Matija Čulo
ŽRŽeljko Rapljenovic
Željko Rapljenovic
JPJasper Plaisier
Jasper Plaisier
Mario BohačMario Bohač
Mario Bohač
Transparent conducting oxides (TCO) with high electrical conductivity and at the same time high transparency in the visible spectrum are an important class of materials widely used in many devices requiring a transparent contact such as light-emitting diodes, solar cells and display screens. Since the improvement of electrical conductivity usually leads to degradation of optical transparency, a fine-tuning sample preparation process and a better understanding of the correlation between structural and transport properties is necessary for optimizing the properties of TCO for use in such devices. Here we report a structural and magnetotransport study of tin oxide (SnO2), a well-known and commonly used TCO, prepared by a simple and relatively cheap Atmospheric Pressure Chemical Vapour Deposition (APCVD) method in the form of thin films deposited on soda-lime glass substrates. The thin films were deposited at two different temperatures (which were previously found to be close to optimum for our setup), 590 °C and 610 °C, and with (doped) or without (undoped) the addition of fluorine dopants. Scanning Electron Microscopy (SEM) and Grazing Incidence X-ray Diffraction (GIXRD) revealed the presence of inhomogeneity in the samples, on a bigger scale in form of grains (80–200 nm), and on a smaller scale in form of crystallites (10–25 nm). Charge carrier density and mobility extracted from DC resistivity and Hall effect measurements were in the ranges 1–3 × 1020 cm−3 and 10–20 cm2/Vs, which are typical values for SnO2 films, and show a negligible temperature dependence from room temperature down to −269 °C. Such behaviour is ascribed to grain boundary scattering, with the interior of the grains degenerately doped (i.e., the Fermi level is situated well above the conduction band minimum) and with negligible electrostatic barriers at the grain boundaries (due to high dopant concentration). The observed difference for factor 2 in mobility among the thin-film SnO2 samples most likely arises due to the difference in the preferred orientation of crystallites (texture coefficient).

28 July 2016 in PLOS ONE
Verified
Journal Article
Open access
PDF file
AHAden Hodzic
Aden Hodzic
MKManfred Kriechbaum
Manfred Kriechbaum
SSSimone Schrank
Simone Schrank
FRFranz Reiter
Franz Reiter
The thermal and structural evolutions associated to active pharmaceutical ingredient (API) purity are monitored using a laboratory instrument (S3-MicroCaliX) allowing simultaneous time-resolved X-ray scattering at both wide and small angles (SWAXS) as a function of temperature. This is performed simultaneously with differential scanning calorimetric (DSC) that is carried out in the same apparatus at scanning rate of 2 K/min on the same sample in the range from 20° to 200°C. We have studied simultaneous thermal and structural properties of pentoxifylline, as an active pharmaceutical ingredient (API), for its purity quality control. We have found a satisfying API purity, due to obtained melting temperature and enthalpy values, which are in a well agreement with literature. We have also found that the combination of these techniques allows the thermal monitoring of scanning rates of 2 K/min, continuously without the need for static thermal equilibration, particularly for X-ray spectra. Hence, DSC and SWAXS allowing better identification of the structural thermal events recorded by following of the phase transitions simultaneously. This interpretation is much better possible when X-ray scattering at small and wide angles is coupled with DSC from the same sample. Hence, as a laboratory tool, the method presents a reproducible thermal and crystallographic API purity quality control of non-complex samples, as crucial information for pharmaceutical technology.

2 September 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
KJKrunoslav Juraić
Krunoslav Juraić
Mario BohačMario Bohač
Mario Bohač
JPJasper Plaisier
Jasper Plaisier
AHAden Hodzic
Aden Hodzic
PDPavo Dubček
Pavo Dubček
Andreja GajovićAndreja Gajović
Andreja Gajović
In this work, we have investigated the potential dual application of TiO2 thin films as a photocatalyst for ammonia degradation, and as a UV light blocking layer in c-Si photovoltaics. For this purpose, we deposited a series of TiO2 thin films on a glass substrate by reactive magnetron sputtering and analysed the influence of the deposition parameters (O2/Ar working gas content and pressure) on the structural, optical and photocatalytic properties. All samples are nanocrystalline anatase TiO2 and have a uniform surface (RMS roughness < 5 nm) in a wide range of magnetron sputtering deposition parameters. They are transparent in the Vis/NIR spectral range and strongly absorb light in the UV range above the optical bandgap energy (3.3 eV), which makes them suitable for the use as UV blocking layers and photocatalysts. The photocatalytic properties were studied in a mini-photocatalytic wind tunnel reactor by examining ammonia degradation. A kinetic study was performed to estimate the reaction rate constants for all samples. The intrinsic reaction rate constant confirmed the crucial role of surface morphology in ammonia decomposition efficiency.

15 March 2024 in Pharmaceuticals
Verified
Journal Article
Open access
PDF file
NMNermina Malanovic
Nermina Malanovic
GBGiovanni Birarda
Giovanni Birarda
SESimone Eder
Simone Eder
HGHeidrun Gruber-Woelfler
Heidrun Gruber-Woelfler
FRFranz Reiter
Franz Reiter
AHAden Hodzic
Aden Hodzic
In this paper, we present the identification of polymorphisms at an early stage, identified by applying non-standard methods such as SAXS. We provide an analytical approach to polymorphism in the quality/purity of an active pharmaceutical ingredient (API), supplied to a generic company by two different suppliers (i.e., manufacturers). Changes in thermodynamic polymorphism firstly become visible in traces in the larger crystal lattices, which are visible on the SAXS spectrum only using the logarithmic scale, as shown in the result figures. Hence, we are here on the trail of the beginning of a new polymorph in nicomorphine, whose crystal waviness at the early stage is visible only in the additional symmetrical peaks identified and calculated using SAXS, while the chemical analyses excluded all kinds of chemical impurities. The chemical and structural properties were studied using the following techniques: SAXS, WAXS, DSC, dissolution, Raman spectroscopy, and FTIR. Only the SAXS technique could identify crucial differences and calculate the additional signals related to giant crystals, whilst a standard method such as WAXS showed none, and nor did the chemical analyses, such as Raman spectroscopy and FT-IR. This means that due to water in crystallization (known in nicomorphine) or thermodynamic waviness, the formation of the new polymorph starts first in traces, which become visible at larger distances from the crystal lattice, detectible only in the SAXS range. This is a very important premise and hypothesis for further research, and we believe that this work lays a new stone in understanding the origin of new unknown polymorphs and their mixtures. Therefore, the aim of this work is to show that the use of non-standard methods (i.e., SAXS) can be of great benefit to API analysis and the identification of polymorphic changes in the early phase, which can cause varied stability, solubility and bioavailability and thus different therapeutic effects or side effects.