This paper presents a new structure for hearing aids. Normally, the power consumption and user experience are contradictory. The proposed hearing aid structure mainly consists of three parts: the earpieces, the mobile computing platform, and the real-time speech-enhancement application. It can run complex algorithms without carrying out heavy calculations on the processors in the hearing aid. Thus, the binaural algorithm is utilized without being limited by complexity and power consumption to improve the user experience. Moreover, the speech-enhancement algorithm can be updated much more easily than in traditional built-in digital signal process hearing aids. A good level of user experience is achieved by combining the hearing aid and mobile computing platform with a 400-MHz transceiver; furthermore, the 400-MHz transceiver can reduce path loss around the body. The concept verification process showed that the overall usage of the central processing unit in the smartphone is around 16%, the signal-to-noise ratios show at least a 30% improvement in some environments, and the whole system delay is 8.8 ms. The presented objective and subjective results show significant improvements regarding user experience and usability brought about by the proposed structure.

An energy-efficiency 16-QAM/MSK transmitter (TX) working at 432 MHz is presented for the short range communications. By adopting the edge-combining power amplifier (ECPA), only an injection-locked ringing oscillator (ILRO) with very low frequency is required, in comparison to the high frequency local oscillator in conventional TX's, which helps to reduce the power consumption of this TX significantly. A new method to control the amplitude of the edge-combined quadrature signals is proposed to generate the 16-quadrature amplitude modulation (16-QAM) and minimum shift keying (MSK) modulations in this work. A finite impulse response (FIR) filter is introduced in the ECPA for side lobe suppression enhancement. Implemented in a 0.18 μm CMOS process, the proposed TX consumes 468 μW when outputting -15 dBm 50 Mbps 16-QAM/MSK signals in simulation. Under 1 V supply, the TX can achieve an energy efficiency of 9.4 pJ/bit at the maximum data rate of 50 Mbps. The phase noise of the RF output in the injection-locked state is -103 dBc/Hz, at 1MHz offset.