Cu2ZnSnS4 (CZTS) is a promising absorber material to produce thin film solar cells thanks to its high absorption coefficient, low cost and low toxicity. CdS is commonly used as a buffer layer for CZTS solar cells but, beyond its toxicity, it has a nonoptimal band alignment with CZTS. ZnxSn1−xO (ZTO), based on earth-abundant and nontoxic elements and with a large and tunable band gap, is a suitable alternative buffer layer. In this paper, the atomic layer deposition (ALD) of ZTO was employed by testing different compositions and thicknesses. ALD not only leads to very compact and homogenous ZTO layers (enabling tuning the stoichiometry of the ZTO so prepared) but also makes the i-ZnO layer (usually sandwiched between the buffer layer and the transparent contact) redundant and detrimental. Through SCAPS simulation and impedance measurements, the ZnSnO/AZO interface impact on the Cd-free kesterite solar cells’ performances has been investigated, highlighting its leading role in achieving an effective charge extraction and the detrimental effect of the i-ZnO layer. With this approach, a solar cell based on an architecture simpler and more eco-friendly than the conventional one has been produced with comparable efficiencies.
Back contact engineering of flexible (Ag,Cu)2ZnSn(S,Se)4 solar cells on Mo foil was performed. Despite the formation of a thick MoSe2 layer, MoO3 insertion at the back reduced kesterite decomposition and promoted grain growth, enabling η of 11.2%.
Among emerging thin-film solar cells, kesterite Cu 2 ZnSn(S,Se) 4 (CZTSSe) absorbers offer several advantages: they are based on earth-abundant, non-toxic elements and combine high stability, tunable bandgap (E g ), and flexibility, key features for integrated photovoltaic (PV) applications. Selenium-rich CZTSSe (E g of 1.1 eV) is an ideal bottom-cell candidate for flexible tandem devices with perovskites, thereby maximising efficiency. However, CZTSSe/perovskite tandems are still underexplored. Here, we report an effective solution - based route for producing high-efficiency CZTSSe bottom cells on both rigid Mo-coated soda-lime-glass and flexible Mo-foil substrates. To optimise absorber morphology and grain size, Na-doping and Ag-alloying were performed. Then, 4-Terminal (4T) tandem devices combining kesterite- and perovskite-based subcells were designed. Solution-processed Cs 0.17 FA 0.83 Pb(I 0.90 Br 0.10 ) 3 perovskites (E g of 1.63 eV) ensured optimal bandgap matching and broadened light harvesting, yielding efficiencies exceeding 22% and 20% for rigid and flexible 4T tandem devices, respectively. This proof-of-concept solution-processed tandem approach represents a promising step toward developing cost-effective and sustainable PV technologies, with promising results for future solar energy applications.