Over the last years, the strategy of employing inevitable organic waste and residue streams to produce valuable and greener materials for a wide range of applications has been proven an efficient and suitable approach. In this research, sulphur-doped porous biochar was produced through a single-step pyrolysis of birch waste tree in the presence of zinc chloride as chemical activator. The sulfur doping process led to a remarkable impact on the biochar structure. Moreover, it was shown that sulfur doping also had an important impact on sodium diclofenac (S-DCF) removal from aqueous solutions due to the introduction of S-functionalities on biochar surface. The adsorption experiments suggested that General and Liu models offered the best fit for the kinetic and equilibrium studies, respectively. The results showed that the kinetic was faster for the S-doped biochar while the maximum adsorption capacity values at 318K were 564 mg g^-1 (non-doped) and 693 mg g^-1 (S-doped); highlighting the better affinity of S-doped biochar for the S-DCF molecule compared to non-doped biochar. The thermodynamic parameters (ΔH⁰, ΔS⁰, ΔG⁰) suggested that the S-DCF removal on both adsorbents was spontaneous, favourable, and endothermic.

O carvão mineral brasileiro contém altos teores de impurezas (pirita e minerais de rochas sedimentares), sendo necessário seu beneficiamento. Os rejeitos do beneficiamento demandam uma grande área física para a sua disposição, modificam a topografia e geram a drenagem ácida de minas (DAM). O objetivo desse trabalho foi caracterizar um típico depósito de rejeitos na região carbonífera de Santa Catarina, buscando a separação de três frações para uso futuro: (a) uma fração para a geração de energia; (b) uma fração enriquecida em silicatos; e (c) uma fração com alto teor de enxofre. A metodologia do trabalho consistiu na amostragem e caracterização do material. A caracterização incluiu análise granulométrica, estudos densimétricos, medidas do teor de cinzas e enxofre, análise mineralógica por DRX, estudos petrográficos em lupa e medidas de contabilização de ácidos e bases. Os resultados granulométricos indicaram que 68% do material é composto por partículas grossas, 15%, por partículas finas e 17%, pelo lodo das bacias de sedimentação. Com o beneficiamento gravimétrico dos resíduos é possível uma recuperação teórica do material de 33,7% para geração de energia e 10,3% para produção de um concentrado rico em pirita. O material restante, com menor quantidade de enxofre e rico em silicatos, tem seu potencial de geração de acidez reduzido em 60% e apresenta possibilidade de uso na construção civil.

This paper proposes pre-beneficiation studies by air jigs of the coal layers from a Moatize coal deposit. Pre-beneficiation, also called destoning, removes tailings before the beneficiation plant. The air jigs operate in the same granulometric size range as the heavy-media cyclones (HMCs) that are installed in the preparation plant. With the destoning, the heavy-media circuit operates with a lower coal feed and higher organic matter contents, increasing its cutting efficiency and lowering operational costs. The use of air jigs reduces the total water consumption in the plant, which is especially important for the region where the plant is installed, as water is particularly scarce. Four coal layers of the Moatize coal deposit were studied, which are currently exploited in the mine. As main results of the study, it is possible to say that the concentration of lights (feed of the preparation plant) and heavies (waste fraction) in air jigs can be carried out with reasonable efficiencies for all coal layers studied, making air jigs a feasible option for coal destoning.

The use of pre-concentration and optimization of concentration methods have been the focus of the modern mineral industry. Sensor-based sorting equipment and flotation are key players in that movement. This study provides an overview of the main sensor-based sorting techniques and their uses, focusing on sulfides, addressing performance analysis methodologies, and giving the advantages and limitations of the method. An overview of the flotation technique is also presented, covering its basic principles of operation, as well as its main applications in sulfides, its interactions with pre-concentration, and some opportunities and perspectives on the method, such as water reuse impacts, tailing reprocessing, etc. Case studies are presented addressing the influence of the techniques on each other and some future prospects for the mining sector, such as deep-sea mining (DSM) and the use of artificial intelligence (AI).