We present a white-light spectral interferometric technique for measuring the absolute spectral optical path difference (OPD) between the beams in a slightly dispersive Michelson interferometer with a thin-film structure as a mirror. We record two spectral interferograms to obtain the spectral interference signal and retrieve from it the spectral phase, which includes the effect of a cube beam splitter and the phase change on reflection from the thin-film structure. Knowing the effective thickness and dispersion of the beam splitter made of BK7 optical glass, we use a simple procedure to determine both the absolute spectral phase difference and OPD. The spectral OPD is measured for a uniform SiO2 thin film on a silicon wafer and is fitted to the theoretical spectral OPD to obtain the thin-film thickness. The theoretical spectral OPD is determined provided that the optical constants of the thin-film structure are known. We measure also the nonlinear-like spectral phase and fit it to the theoretical values in order to obtain the thin-film thickness.
We developed the thin film microwave magnetic material, M-type barium hexagonal ferrite (BaM) doped with Al, for signal processing devices operating above 40 GHz with little to no applied magnetic field. Al was chosen as the dopant material because it significantly increases the already strong anisotropy field of BaM. A series of thin film BaAlxFe12-xO19 samples, x ranging from 0 to 2 in 0.25 steps, were deposited on Pt templates using a metal-organic decomposition growth technique. The resulting films are polycrystalline and highly textured, with the hexagonal c-axis directed out of plane. These films are also self-biasing; easy axis hysteresis loops have a high squareness ratio, s, in the 0.83-0.92 range. As expected, the anisotropy field increases with x, ranging from 1.34 to 2.19 × 106 A/m (16.9-27.5 kOe) for x = 0-2, while the saturation magnetization Ms decreases with x, ranging from 0.334 to 0.175 × 106 A/m (4πMs = 4.2-2.2 kG) for x = 0-2. These values were measured at room temperature, but the temperature dependence of these quantities was also measured below room temperature, down to 30 K. The measured ferromagnetic resonance linewidths, on the order of 12-30 × 103 A/m (140–370 Oe) for compositions below x = 1, indicate device-quality films. Above a certain threshold, the linewidth increases linearly with frequency at a rate of 0.2-0.64 × 103 (A/m)/GHz (2.5-8 Oe/GHz) for x = 0–1, respectively. The behavior of the linewidth is correlated with the structural properties of the films measured using x-ray diffraction and atomic force microscopy. The results of magnetic force microscopy, Curie point measurements, spectral ellipsometry (index of refraction), and magneto-optical measurements are also included and discussed.
Surface plasmon resonance has become a widely accepted optical technique for studying biological and chemical interactions. Among others, detecting small changes in analyte concentration in complex solutions remains challenging, e.g., because of the need of distinguishing the interaction of interest from other effects. In our model study, the resolution ability of plasmonic sensing element was enhanced by two ways. Besides an implementation of metal-insulator-metal (MIM) plasmonic nanostructure, we suggest concatenation with waveguiding substructure to achieve mutual coupling of surface plasmon polariton (SPP) with an optical waveguiding mode. The dependence of coupling conditions on the multilayer parameters was analyzed to obtain optimal field intensity enhancement.
Steel-wire rope is a mechanical component that has versatile uses and on which human lives depend. One of the basic parameters that serve to describe the rope is its load-bearing capacity. The static load-bearing capacity is a mechanical property characterized by the limit static force that the rope is able to endure before it breaks. This value depends mainly on the cross-section and the material of the rope. The load-bearing capacity of the entire rope is obtained in tensile experimental tests. This method is expensive and sometimes unavailable due to the load limit of testing machines. At present, another common method uses numerical modeling to simulate an experimental test and evaluates the load-bearing capacity. The finite element method is used to describe the numerical model. The general procedure for solving engineering tasks of load-bearing capacity is by using the volume (3D) elements of a finite element mesh. The computational complexity of such a non-linear task is high. Due to the usability of the method and its implementation in practice, it is necessary to simplify the model and reduce the calculation time. Therefore, this article deals with the creation of a static numerical model which can evaluate the load-bearing capacity of steel ropes in a short time without compromising accuracy. The proposed model describes wires using beam elements instead of volume elements. The output of modeling is the response of each rope to its displacement and the evaluation of plastic strains in the ropes at selected load levels. In this article, a simplified numerical model is designed and applied to two constructions of steel ropes, namely the single strand rope 1 × 37 and multi-strand rope 6 × 7-WSC.
1 November 2013 in Journal of Magnetism and Magnetic Materials