Tatiana Czánová

Tatiana Czánová

Auto-generated profile, based on publicly available information

Tatiana Czánová

Department of Machining and Manufacturing Technology, Faculty of Mechanical Engineering - University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 May 2023 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
PTPavol Timko
Pavol Timko
JHJozef Holubjak
Jozef Holubjak
VBVladimír Bechný
Vladimír Bechný
Martin NovákMartin Novák
Martin Novák
ACAndrej Czán
Andrej Czán
TCTatiana Czánová
Tatiana Czánová
The presented article focuses on the analysis of the components manufactured by different additive technologies and their reverse digitization. Sintered components were manufactured by Selective Laser Melting (SLM) and Atomic Diffusion Additive Manufacturing (ADAM) technologies. ADAM can be classified as indirect additive production using fibre of metal powder bound in a plastic matrix. SLM method works on the basis of selective bonding of metal powder using the thermal energy of the laser beam. The components were manufactured from anti-corrosion materials 17-4 PH and 316L-0407. In the experiment, parameters such as dimensional and shape accuracy were verified using laser scanning. Next, the roughness of the printed surfaces was measured on an Alicona Infinite Focus 5G optical measuring device. The dimensional accuracy of the ADAM process was evaluated using ISO IT grades. The accuracy of ADAM technology achieves the IT13 grade that is comparable to that of traditional processes for the production of semi-finished metal parts.

1 July 2022 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
PTPavol Timko
Pavol Timko
TCTatiana Czánová
Tatiana Czánová
ACAndrej Czán
Andrej Czán
SSSilvia Slabejová
Silvia Slabejová
JHJozef Holubjak
Jozef Holubjak
MCMiroslav Cedzo
Miroslav Cedzo

23 February 2024 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
ACAndrej Czán
Andrej Czán
TCTatiana Czanova
Tatiana Czanova
JHJozef Holubjak
Jozef Holubjak
Martin NovákMartin Novák
Martin Novák
NCNatalia Czanova
Natalia Czanova
DKDominik Krisak
Dominik Krisak
Atomic Diffusion Additive Manufacturing (ADAM) is a progressive layering process based on metallic materials with a plastic binder designed to extrude the material. The ADAM process can be classified as an indirect additive manufacturing process in which a solid fiber of metal powder enclosed in a plastic binder is applied. After creating a 3D object by the ADAM process, the excess plastic binder is removed in the cleaning chamber and vacuum sintering of the 3D object is performed. This work aims to provide a preliminary characterization of the ADAM process and compare the achieved results with the application most recently implemented in additive manufacturing for metal 3D objects using Selective Laser Melting SLM. In particular, the density and microstructure of the applied process and material 17-4PH are studied, while optimal or recommended technological parameters of production facilities are applied. Furthermore, the dimensional accuracy of the ADAM process is observed, which is evaluated using IT accuracy levels according to the ISO reference artifact. Due to the applied AM process, the final character of a 3D object depends on technological parameters. The weight of a 3D object is low compared to the material processed by additive manufacturing processes in a powder bed. The dimensional accuracy and roughness of the surface depend on the geometry, orientation, and position of the individual shape specifications of the 3D object. Additive technologies generally achieve a degree of accuracy of approximately IT12 to IT13, which is comparable to traditional semi-finished metal manufacturing processes.

3 May 2023 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
MCMiroslav Cedzo
Miroslav Cedzo
RJRichard Joch
Richard Joch
PTPavol Timko
Pavol Timko
JHJozef Holubják
Jozef Holubják
TCTatiana Czánová
Tatiana Czánová
Michal ŠajgalíkMichal Šajgalík
Michal Šajgalík
There is a lot of applications for manipulating industrial robots nowadays. Maximizing the tasks that can be assigned to robot manipulators is one of the criteria for deciding if their application is appropriate. The article discusses the topology optimization of the gripping jaws of an industrial robot to reduce the jaws' weight. The previously used gripping element made of C50E steel was optimized to reduce the weight of the jaws. Shape optimization was performed based on analysis from CAD programs Inventor Professional 2022, Autodesk Fusion 360, and Ansys Discovery. The new jaws were manufactured by the additive technology of selective laser sintering (SLS) from PA12 material. The optimization resulted in a significant reduction in weight compared to the original jaws. As a result of optimizing the weight of the designed jaws, it was possible to increase the weight of the object of manipulation.

1 January 2019 in Transportation Research Procedia
Verified
Journal Article
Open access
PMPavol Martikan
Pavol Martikan
JHJozef Holubjak
Jozef Holubjak
TCTatiana Czanova
Tatiana Czanova
JPJozef Pustay
Jozef Pustay
RJRichard Joch
Richard Joch

22 December 2023 in Manufacturing Technology
Verified
Journal Article
Open access
PDF file
ACAndrej Czan
Andrej Czan
TCTatiana Czanova
Tatiana Czanova
JHJozef Holubjak
Jozef Holubjak
Martin NovákMartin Novák
Martin Novák
NCNatalia Czanova
Natalia Czanova
DKDominik Krisak
Dominik Krisak
This research focuses on comparing the working accuracy of two additive manufacturing processes, Atomic Diffusion Additive Manufacturing (ADAM) and Binder Jetting (BJ). Through the analysis of key characteristics of these processes, we aim to ...