External interference in ionospheric sounding seriously degrades the quality of echo signals and data; thus, it should be eliminated. This paper presents a method for suppressing interference using chaotic coding with a set of Bernoulli map sequences; compared with other commonly used coding methods such as Barker code, complementary code, and Barker-like codes, through simulation, the ambiguity function (AF) of Bernoulli map codes has better performance in terms of peak sidelobe level (PSL), integral sidelobe ratio (ISL), noise suppression (NS), and signal-to-noise ratio (SNR). Experimental tests were performed using a vertical ionosonde in Yinchuan, Ningxia Hui Autonomous Region, China, and the ionosonde was operated by alternating 40-bit Barker-like coding and 40-bit Bernoulli map coding each day to compare the effectiveness of interference suppression. The results showed that using Bernoulli map coding could remove interference and improve SNR significantly, thereby improving the data quality of the resulting ionograms.

With the rapid development of software-defined radio (SDR) technology, a digital, software-reconfigurable, and flexible solution is provided for microwave radiometers, particularly suitable for atmospheric water vapor and oxygen detection with wideband, multi-channel requirements, significantly improving system efficiency. Meanwhile, digitization helps improve channel consistency and address nonlinearity issues, while the digital zero-balancing mechanism implemented through adaptive integration is more suitable for digital platforms. This paper proposes a digital Dicke-type radiometer system based on an SDR platform, using Xilinx RFSoC XCZU47DR (AMD, San Jose, CA, USA) as the core hardware to achieve single-chip integration of RF signal sampling, digital local oscillator generation, and signal processing. The system implements a 46-channel channelized receiver (23 channels each for K-band and V-band) on an FPGA using a polyphase filter bank. The prototype filters achieve 70 dB stopband attenuation and 0.5 dB passband ripple, with each polyphase branch requiring only 25 coefficients, significantly reducing hardware resource consumption. An adaptive integration method is proposed, where an adaptive switch controller dynamically adjusts the hot source injection time ratio by calculating the power difference between adjacent integration periods, enabling the Dicke zero-balancing mechanism to operate entirely in the digital domain. Furthermore, a complete hardware transfer model is established for three signal branches (antenna, hot source, and matched load), and full-chain calibration of all 46 channels is performed using a liquid nitrogen cold source, with calibration reliability verified through blackbody measurements. Experimental results demonstrate brightness temperature consistency better than 0.7 K, with a sensitivity of less than 0.15 K for the K-band and less than 0.21 K for the V-band at 1 s integration time.

The echo traces in the ionograms contain key information about the ionosphere. Therefore, the accurate extraction of these traces is crucial for the subsequent work. This paper transforms the original signal processing problem into a semantic segmentation task, combines it with the currently popular deep learning techniques, and proposes a multiscale Transformer network to achieve pixel-level trace extraction. To train the proposed model, we built a dataset by discretizing the original echo data, labeling, and other preprocessing work. A series of advanced semantic segmentation networks are utilized for comparative experiments. The analysis of the results indicates that the proposed network excels in performance, achieving the highest scores on key semantic segmentation evaluation metrics, including mIoU, Kappa, Dice, and AUC-ROC. In addition, this paper also designs a series of ablation experiments to observe the changes in network performance and to evaluate the rationality of the network design. The experimental results demonstrate the effectiveness of the network in the trace extraction task, which plays a positive role in the subsequent electron density reversal work.

In this paper, a matching method for altimeter and transponder signals in Sub-optimal Maximum Likelihood Estimate (SMLE) tracking mode is proposed. In the in-orbit calibration of the altimeter in SMLE tracking mode using the reconstructive transponder, it is necessary to separate the forwarding signal from the ground echo signal. At the same time, the fluctuations in the received signal of the altimeter, which are caused by the forwarding signal of the transponder, can be eliminated. The transponder generates a bias when measuring the arrival time of the transmitting signal from the altimeter and embeds this bias in both the transponder-recorded data and the altimeter-recorded data. Therefore, the two sets of data have one-to-one correspondence, and they are superimposed using the sliding sum method. Moreover, the distance between the altimeter and the transponder is a parabolic geometric relationship, and the outliers are eliminated by the fitting error minimization decision, and the transponder signal is separated from the ground echo. The final altimeter transmitting–receiving signal path is obtained. Furthermore, the principles underlying this method can be used for any transponder that can adjust the response signal delay during calibration.

Ground-based scatterometers are widely used for quantitative microwave backscattering measurements in soil moisture retrieval, vegetation monitoring, and satellite scatterometer validation. However, low-cost software-defined radio (SDR) transceivers provide limited instantaneous bandwidth, making it difficult to transmit and process signals with bandwidths on the order of hundreds of MHz for fine range resolution, especially for systems requiring real-time onboard processing. To address this problem, this paper presents a vehicular, fully polarimetric, SDR-based scatterometer that achieves an equivalent wideband response by sequentially transmitting adjacent narrow subbands and coherently synthesizing them onboard. To enable real-time operation on a resource-limited field-programmable gate array/system-on-chip (FPGA/SoC) platform, we adopt a frequency-domain synthesis-pulse-compression pipeline that avoids interpolation and eliminates repeated matched filtering across subbands. A slot-based online phase calibration is performed within the settling window after each fast lock to estimate and compensate random local oscillator (LO) phase offsets, preserving coherent stitching. In addition, pulse repetition within each subband and coherent accumulation are integrated to improve the signal-to-noise ratio (SNR) under real-time throughput constraints. A Zynq-based implementation demonstrates deterministic onboard range-profile output, with a minimum processing latency of about 1.57 ms per frame. Loopback and outdoor experiments validate the equivalent 200 MHz bandwidth (five 40 MHz subbands), achieving approximately 0.75 m resolution and yielding sidelobe metrics consistent with the designed windowing, including a peak sidelobe ratio (PSLR) of −27.43 dB and an integrated sidelobe ratio (ISLR) of −12.38 dB. Field scans over farmland further show consistent ${\mathsf{\sigma }}_0$ trends across incidence angle and azimuth, indicating reliable onboard quantitative backscattering measurement. These results demonstrate that the proposed method provides a feasible solution for deterministic real-time equivalent wideband scatterometry on a low-cost SDR platform.

根据银川电离层垂测仪的回波数据, 采用脉冲压缩技术, 使用Bernoulli映射序列对发射信号进行编码, 解决实际探测中回波信号混合强杂波干扰的问题, 从而获得高质量频高图. 为从图中提取电离层的关键信息, 将信号处理问题转换成计算机视觉中的语义分割任务, 构建原始频高图数据集, 并进行离散化和人工标注等预处理. 通过训练cGAN神经网络分析得到频高图中各层回波的特征参数, 达到分割不同描迹的目的. 采用改进式国际参考电离层底部反演模型和NeQuick顶部模型对垂测仪上空的电子浓度剖面进行反演, 根据张衡一号卫星的实测数据对顶部的计算结果进行修正. 通过将计算得到的总电子浓度与CDDIS公开的数据结果对比, 验证了垂测仪数据的准确性. 在此基础上, 结合高沙窝磁通门的地磁数据, 垂测仪于2023年4月23－24日的大地磁暴期间成功观测到电离层异常变化的全过程并给出了总电子浓度变化结果, 为探究中国西部电磁环境变化提供准确可靠的观测数据.