HY-2B (Haiyang) is the follow-on mission to HY-2A, the Chinese first sea satellite for oceanography, launched in Oct 2018. The main payloads onboard are similar to HY-2A. For the altimeter, an in-orbit calibration mode was designed to achieve higher calibration precision. An improved transponder was built and deployed for the calibration campaign. The purpose of the paper is to describe the in-orbit calibration and validation of HY-2B altimeter based on an improved transponder. A signal-rebuilt transponder was developed and employed in HY-2A altimeter calibration. It played an important role in quantitative analysis of HY-2A altimeter data products. For HY-2B altimeter, a newly-designed calibration mode was added, and an improved transponder was built. It has some advantages over the previous one in the rebuilt signal forms and modulation ways. Two calibration campaigns were carried out, in April 2019 and October 2020 at different sites. In the two campaigns, the precision of the altimeter range calibration is obtained less than 1 cm. For further validation and assessment to the result, a comparison between HY-2B and Jason-3 was performed in term of SSH (Sea Surface Height) on the tens of cross track points in the open ocean. The comparison result shows high degree of accuracy and stability of HY-2B altimeter instrument. In Chinas next five-year plan (2021-2025), many more transponders and related calibration facilities would be installed in the ocean calibration fields, serving a variety of different satellite altimetry missions.

External interference in ionospheric sounding seriously degrades the quality of echo signals and data; thus, it should be eliminated. This paper presents a method for suppressing interference using chaotic coding with a set of Bernoulli map sequences; compared with other commonly used coding methods such as Barker code, complementary code, and Barker-like codes, through simulation, the ambiguity function (AF) of Bernoulli map codes has better performance in terms of peak sidelobe level (PSL), integral sidelobe ratio (ISL), noise suppression (NS), and signal-to-noise ratio (SNR). Experimental tests were performed using a vertical ionosonde in Yinchuan, Ningxia Hui Autonomous Region, China, and the ionosonde was operated by alternating 40-bit Barker-like coding and 40-bit Bernoulli map coding each day to compare the effectiveness of interference suppression. The results showed that using Bernoulli map coding could remove interference and improve SNR significantly, thereby improving the data quality of the resulting ionograms.

The upcoming Salinity Satellite, scheduled for launch in 2024, will feature the world’s first phased array radar scatterometer. To validate its capability in measuring ocean surface backscatter coefficients, this paper conducts an in-depth analysis of the onboard verification flight test for the Salinity Satellite scatterometer. This paper provides a detailed introduction to the system design of the Salinity Satellite scatterometer, which utilizes phased array radar technology and digital beamforming techniques to achieve accurate measurements of sea surface scattering characteristics. The paper elaborates on the derivation of backscatter coefficients, system calibration, and phase amplitude correction for the phased array scatterometer. Furthermore, it describes the process of the onboard calibration flight test. By analyzing internal noise signals, onboard calibration signals, and external noise signals, the stability and reliability of the scatterometer system are validated. The experiment covers both land and ocean observations, with a particular focus on complex sea surface conditions in nearshore areas. Through the precise analysis of backscatter coefficients, the paper successfully distinguishes the different backscatter coefficient characteristics between ocean and land. The research results effectively demonstrate the feasibility of the Salinity Satellite scatterometer for measuring backscatter coefficients in a phased array configuration, as well as its outstanding performance in complex marine environments.

In this paper, a matching method for altimeter and transponder signals in Sub-optimal Maximum Likelihood Estimate (SMLE) tracking mode is proposed. In the in-orbit calibration of the altimeter in SMLE tracking mode using the reconstructive transponder, it is necessary to separate the forwarding signal from the ground echo signal. At the same time, the fluctuations in the received signal of the altimeter, which are caused by the forwarding signal of the transponder, can be eliminated. The transponder generates a bias when measuring the arrival time of the transmitting signal from the altimeter and embeds this bias in both the transponder-recorded data and the altimeter-recorded data. Therefore, the two sets of data have one-to-one correspondence, and they are superimposed using the sliding sum method. Moreover, the distance between the altimeter and the transponder is a parabolic geometric relationship, and the outliers are eliminated by the fitting error minimization decision, and the transponder signal is separated from the ground echo. The final altimeter transmitting–receiving signal path is obtained. Furthermore, the principles underlying this method can be used for any transponder that can adjust the response signal delay during calibration.

Ground-based scatterometers are widely used for quantitative microwave backscattering measurements in soil moisture retrieval, vegetation monitoring, and satellite scatterometer validation. However, low-cost software-defined radio (SDR) transceivers provide limited instantaneous bandwidth, making it difficult to transmit and process signals with bandwidths on the order of hundreds of MHz for fine range resolution, especially for systems requiring real-time onboard processing. To address this problem, this paper presents a vehicular, fully polarimetric, SDR-based scatterometer that achieves an equivalent wideband response by sequentially transmitting adjacent narrow subbands and coherently synthesizing them onboard. To enable real-time operation on a resource-limited field-programmable gate array/system-on-chip (FPGA/SoC) platform, we adopt a frequency-domain synthesis-pulse-compression pipeline that avoids interpolation and eliminates repeated matched filtering across subbands. A slot-based online phase calibration is performed within the settling window after each fast lock to estimate and compensate random local oscillator (LO) phase offsets, preserving coherent stitching. In addition, pulse repetition within each subband and coherent accumulation are integrated to improve the signal-to-noise ratio (SNR) under real-time throughput constraints. A Zynq-based implementation demonstrates deterministic onboard range-profile output, with a minimum processing latency of about 1.57 ms per frame. Loopback and outdoor experiments validate the equivalent 200 MHz bandwidth (five 40 MHz subbands), achieving approximately 0.75 m resolution and yielding sidelobe metrics consistent with the designed windowing, including a peak sidelobe ratio (PSLR) of −27.43 dB and an integrated sidelobe ratio (ISLR) of −12.38 dB. Field scans over farmland further show consistent ${\mathsf{\sigma }}_0$ trends across incidence angle and azimuth, indicating reliable onboard quantitative backscattering measurement. These results demonstrate that the proposed method provides a feasible solution for deterministic real-time equivalent wideband scatterometry on a low-cost SDR platform.