Zhichao Li

Dr. Zhichao Li

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 March 2024 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
ZLZhichao Li
Zhichao Li
SHShunan Hu
Shunan Hu
YYYongbao Yang
Yongbao Yang
HZhaimin zhu
haimin zhu
Automotive bumper beam is a vital component that shields passenger and vehicle from harm and damage generated by catastrophic collapse. Previous investigations on its bending behavior have largely concentrated on multi-cell tubes with the same length, whereas stepped multi-cell structures have received less attention. In this paper, a novel stepped multi-cell configuration is proposed to improve the energy absorption characteristics of thin-walled structures under transverse loading. The finite element method is employed to analyze the crushing behaviors of the stepped multi-cell tubes. The numerical results reveal that the stepped multi-cell structures (SM2 to SM5) can reduce the initial peak force by 23.44–45.91% while increasing the energy absorption capacity, crush load efficiency, and specific energy absorption by 5.87–29.51, 38.29–139.45, and 5.87–29.51%, respectively, when compared to a conventional square tube (M1). In addition, the effects of wall thickness, section width, load angle, punch radius, and punch shape on the bending behaviors and energy absorption characteristics are examined. The results indicate that these factors have a considerable influence on the deformation features of M1 and SM2, which leads to a significant reduction in their bending energy absorption characteristics. These variables have no influence on the deformation modes of SM3, SM4, and SM5, and they present local indentation deformation with a high energy absorption efficiency. Increasing the number of layers improves the comprehensive performance of stepped multi-cell tubes, with SM5 exhibiting the best energy absorption characteristics under transverse loading.

9 September 2026 in Polymers
Verified
Journal Article
Open access
PDF file
LFLili Fan
Lili Fan
HZhaimin zhu
haimin zhu
JDJianhua Du
Jianhua Du
ZLZhichao Li
Zhichao Li
HWHaisong Wu
Haisong Wu
JYJunhui Yao
Junhui Yao
Adaptive vibration control under variable dynamic loading requires damping materials that combine structural stability, efficient energy dissipation, and field-tunable mechanical response. Here, natural-rubber-based magnetorheological elastomers containing coumarone resin (MRE-C), naphthenic oil (MRE-N), or paraffin (MRE-P) were systematically compared through microstructural characterization, dynamic viscoelastic testing, vulcanization kinetics, and equilibrium swelling. MRE-C exhibited pronounced strain-induced softening, whereas MRE-P showed a high relative dynamic sensitivity but limited absolute stiffness. MRE-N achieved the most favorable overall balance, with more continuous anisotropic particle-chain structures and the lowest Payne-effect amplitude (37.90%). At 5 A, its storage modulus increased by 25.8%, close to the 30.9% increase in MRE-P, while maintaining substantially higher absolute G′ and G″ and a nearly unchanged tan δ. MRE-N’s macroscopic advantage was associated with more favorable network formation, with 17.9% and 7.4% lower apparent activation energies and 7.2% and 18.1% higher apparent crosslink densities than MRE-C and MRE-P, respectively. Molecular simulations of representative sulfur bridges further indicated that monosulfidic bridges favored geometric constraint and structural recovery, whereas disulfidic bridges exhibited greater conformational adaptability. These results link plasticizer-dependent vulcanization and crosslinking state with macroscopic magneto-viscoelastic performance and identify naphthenic oil as the most effective of the investigated plasticizers for balancing stiffness, energy dissipation, and magnetic responsiveness.

4 September 2026 in Actuators
Verified
Journal Article
Open access
PDF file
LFLili Fan
Lili Fan
HZhaimin zhu
haimin zhu
GGGuolin Guo
Guolin Guo
ZLZhichao Li
Zhichao Li
WOWenmin Ou
Wenmin Ou
SZShenglong Zhang
Shenglong Zhang
In helicopter rotor systems, effective suppression of lead–lag vibration requires dampers with reliable load transfer, appropriate stiffness matching, tunable damping, and efficient energy dissipation. However, conventional lead–lag dampers often suffer from limited stiffness–damping adjustability and sealing-related constraints. Here, we developed a magnetorheological fluid elastomeric (MRFE) damper by integrating magnetorheological fluid with a rubber elastomer. An elastomer system with a target shear modulus of 0.72 MPa was obtained through systematic design of the rubber formulation, rubber–metal bonding, and vulcanization process. Dynamic characterization showed that the dissipated energy increased markedly with amplitude but only slightly with frequency, whereas applied current exerted the strongest influence on the MRFE response. As the current increased from 0 to 1.5 A, the dissipated energy, effective stiffness, and equivalent damping coefficient increased by 1901.5%, 491.0%, and 961.1%, respectively. The zero-current effective stiffness of 0.443 kN/mm closely matched the required baseline stiffness of 0.44 kN/mm. For inverse current prediction, the improved Transformer model with hyperparameters optimized using PSO achieved a 72.04% lower RMSE than the differential evolution-assisted one-dimensional long short-term memory (DE-1DLSTM) model. These results suggest the potential of the MRFE for stiffness-matched support, controllable energy dissipation, and data-driven current prediction in rotor lead–lag vibration mitigation.