The existing research on magnetorheological elastomer (MRE) mainly focused on the improvement of MRE formula and structural design of MRE devices. As to the microscopic mechanism, less research has been done. Based on the scanning electron micrograph of MRE, a novel chain-cluster model of MRE was constructed in this study. Particle size and particle distance were introduced simultaneously to the constitutive relation of MRE. The dynamic mechanical properties of MRE are studied theoretically and experimentally. Using the constructed chain-cluster model of MRE, the effect of magnetic field, particle volume fraction and strain on the magnetic-induced modulus of MRE were simulated. Rotating rheometer was adopted to test the magnetic response characteristics of MREs. Simulation and test results showed that the maximum magnetic-induced modulus tested experimentally was in good agreement with that calculated theoretically. Thus, the constructed chain-cluster model of MRE shows an important role in the field of intelligent vibration. It not only makes great sense in the prediction of MRE property but provides guidance on the property improvement of MRE.
1 January 2025 in International Journal of Rotating Machinery
A hybrid modeling approach integrating lumped mass and finite element methods is developed to establish the coupled dynamic model of a multispan flexible rotor system. The hollow shaft is discretized using Timoshenko beam elements to account for shear deformation, gyroscopic moments, and rotational inertia. A nonlinear dynamic ball bearing model incorporating time‐varying stiffness and radial clearance effects is formulated based on Hertzian contact theory and piecewise Heaviside functions. Analytical derivations and finite element simulations determine the stiffness matrices of laminated couplings, with a 9.95% discrepancy observed between theoretical and numerical angular stiffness values. Viscoelastic rubber damping rings are characterized through a Mooney–Rivlin hyperelastic model combined with a Prony series formulation. Experimental validation on a multispan rotor test platform demonstrates critical speed predictions with less than 4.3% error relative to measured data. Following that, the numerical approach is used to examine how the ball bearing, laminated coupling, and rubber damping ring affect the system’s dynamic behavior. The results demonstrate that the time‐varying stiffness effect of the ball bearing is noticeable at low speeds and diminishes with increasing speed; the laminated coupling lessens the mutual dynamic effect between the system’s rotors and makes each rotor comparatively independent. The natural frequency of the system could be changed by varying the angular stiffness of the laminated coupling since it is more susceptible to it. The rubber damping rings shift the system’s critical speed and reduce resonance traversal amplitudes, while lowering bearing acceleration peaks to mitigate fatigue and extend operational lifespan. This work provides a theoretical framework for designing complex rotor systems with optimized dynamic performance.
A piezoelectric shunt damping ring comprising six circumferential stack–frame units is proposed for vibration suppression in shaft–support systems. Bow-shaped protective frames transfer radial motion into axial deformation of piezoelectric stacks connected to independent passive series-RL circuits. A complete-ring electromechanical model incorporates deformation transfer, directional coupling, and the combined feedback of the shunt branches. A coupling-corrected analytical relation predicts a common inductance of approximately 0.1936 H, within about 0.3% of the numerical optimum. With all six branches active, joint inductance–resistance optimization yields approximately 0.19301 H and 144 Ω, reducing the predicted peak force transmissibility from 4.35 to 2.14, a reduction of 50.8%. Two branches aligned with the excitation direction provide most of the attainable attenuation, with diminishing returns from additional branches. Parameter studies show a non-monotonic resistance effect and greater sensitivity to inductance detuning than to resistance variation. Harmonic frequency-sweep tests on a shaft–support assembly show that activating all six branches reduces the peak transmitted force from 35.8 to 24.3 N under constant input-force excitation, corresponding to 32.1% attenuation. These results support the configuration’s vibration-suppression capability and provide guidance for circuit tuning and branch selection.
27 November 2025 in International Journal of Structural Stability and Dynamics
Adaptive vibration control under variable dynamic loading requires damping materials that combine structural stability, efficient energy dissipation, and field-tunable mechanical response. Here, natural-rubber-based magnetorheological elastomers containing coumarone resin (MRE-C), naphthenic oil (MRE-N), or paraffin (MRE-P) were systematically compared through microstructural characterization, dynamic viscoelastic testing, vulcanization kinetics, and equilibrium swelling. MRE-C exhibited pronounced strain-induced softening, whereas MRE-P showed a high relative dynamic sensitivity but limited absolute stiffness. MRE-N achieved the most favorable overall balance, with more continuous anisotropic particle-chain structures and the lowest Payne-effect amplitude (37.90%). At 5 A, its storage modulus increased by 25.8%, close to the 30.9% increase in MRE-P, while maintaining substantially higher absolute G′ and G″ and a nearly unchanged tan δ. MRE-N’s macroscopic advantage was associated with more favorable network formation, with 17.9% and 7.4% lower apparent activation energies and 7.2% and 18.1% higher apparent crosslink densities than MRE-C and MRE-P, respectively. Molecular simulations of representative sulfur bridges further indicated that monosulfidic bridges favored geometric constraint and structural recovery, whereas disulfidic bridges exhibited greater conformational adaptability. These results link plasticizer-dependent vulcanization and crosslinking state with macroscopic magneto-viscoelastic performance and identify naphthenic oil as the most effective of the investigated plasticizers for balancing stiffness, energy dissipation, and magnetic responsiveness.
In helicopter rotor systems, effective suppression of lead–lag vibration requires dampers with reliable load transfer, appropriate stiffness matching, tunable damping, and efficient energy dissipation. However, conventional lead–lag dampers often suffer from limited stiffness–damping adjustability and sealing-related constraints. Here, we developed a magnetorheological fluid elastomeric (MRFE) damper by integrating magnetorheological fluid with a rubber elastomer. An elastomer system with a target shear modulus of 0.72 MPa was obtained through systematic design of the rubber formulation, rubber–metal bonding, and vulcanization process. Dynamic characterization showed that the dissipated energy increased markedly with amplitude but only slightly with frequency, whereas applied current exerted the strongest influence on the MRFE response. As the current increased from 0 to 1.5 A, the dissipated energy, effective stiffness, and equivalent damping coefficient increased by 1901.5%, 491.0%, and 961.1%, respectively. The zero-current effective stiffness of 0.443 kN/mm closely matched the required baseline stiffness of 0.44 kN/mm. For inverse current prediction, the improved Transformer model with hyperparameters optimized using PSO achieved a 72.04% lower RMSE than the differential evolution-assisted one-dimensional long short-term memory (DE-1DLSTM) model. These results suggest the potential of the MRFE for stiffness-matched support, controllable energy dissipation, and data-driven current prediction in rotor lead–lag vibration mitigation.