A study on the underlying interaction mechanisms between lattice constants, magnetic and dielectric properties with inhomogeneities or internal interfaces in hexagonal, off-stoichiometric LuMnO 3 oxide is presented. By increasing Mn content the a -axis constant and volume of the unit cell, the antiferromagnetic (AFM) Néel temperature, TN , and frustration factor of the frustrated Mn 3+ trimmers in basal plane show decreasing trends. It was found that increasing the annealing time improves the properties of the lattices and progressively eliminates secondary phases for compositions within the solid solution stability limits. A magnetic contribution below TN is observed for all samples. Two regimes of magnetization below and above 45 K were observed in the AFM state. The magnetic contribution below TN is assigned to either the secondary phase or internal interfaces like ferroelectric (FE) domain walls. Magneto-dielectric coupling at TN is preserved in off-stoichiometric ceramics. The presence of a low temperature anomaly of the dielectric constant is correlated to the composition of the solid solution in off-stoichiometric ceramics. Large FE domains are observed in piezoresponse force microscopy (PFM) images of doped and un-doped ceramics, whereas atomic structure analysis indicates the parallel formation of nano-sized FE domains. A combination of measured properties and microscopy images of micron- and nano-sized domains ascertain the role of lattice distortion and stability of solid solution on multiferroic properties.
The unprecedented attributes such as biocompatibility and flexibility of macromolecular piezoelectric polymer has triggered an immense interested in scientific society for their potential exploitation in implantable electronic devices. In the present article, a theoretical and experimental investigation is done to explore the polarization behavior of composite fibers based on copolymer poly-trifluoroethylene P(VDF-TrFE) and graphene oxide (GO) with varying composition of the components is explored for its possible application in bioelectronic devices. Electromechanical properties of the PVDF/GO nanofibers were investigated using piezoresponse force microscopy (PFM) method. The switching behavior, charge states, and piezoelectric response of the fibers were found to depend on the concentration of GO up to 20%. Theoretical models of PVDF chains, interacting with Graphene/GO layers has been used to explore the evolution of piezoresponse in the composite fibers. In order to compute piezoelectric coefficients, the behavior of composite in electrical fields has been modeled using software HyperChem. The experimental results are qualitatively correlated with a computed theoretical model.
1 September 2017 in Journal of Physics D: Applied Physics
This study investigates the nanostructure of perovskite thin films, and its influence on magnetic properties. Epitaxial thin films of perovskite MnO 3 with thickness ranging from nm to 320 nm were deposited on SrTiO 3 (1 0 0) substrates using pulsed laser deposition techniques. X-ray diffraction, along with high-resolution transmission electron microscopy (HRTEM) investigations were carried out, and showed the presence of a second, La-rich phase in thick film. Scanning electron microscopy analysis showed thinner films to have smooth surfaces, while thicker films presented large triangular shapes emerging out of the film surface. Also HRTEM images revealed epitaxial growth for thinner films. Thicker films grow with numerous misfit dislocations leading to columnar structure, where the thickest film presents branched structure with an intermediate La-rich layer. Lattice mismatch, diffusion of Mn ions into the substrate and substituting Ti ions are known as sources of strain in films near interfaces. Magnetic properties in the structure mentioned are described by double-exchange interaction, which is very sensitive to local structure. Hence, the nanostructure of films reported here has a remarkable effect on their magnetic properties.