Muhammad Ali

Dr. Muhammad Ali

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
AWAtom O. Watanabe
Atom O. Watanabe
MAMuhammad Ali
Muhammad Ali
SSSk Yeahia Been Sayeed
Sk Yeahia Been Sayeed
RTRao R. Tummala
Rao R. Tummala
PMPulugurtha Markondeya
Pulugurtha Markondeya
Increasing data rates, spectrum efficiency and energy efficiency have been driving major advances in the design and hardware integration of RF communication networks. In order to meet the data rate and efficiency metrics, 5G networks have emerged as a follow-on to 4G, and projected to have 100X higher wireless date rates and 100X lower latency than those with current 4G networks. Major challenges arise in the packaging of radio-frequency front-end modules because of the stringent low signal-loss requirements in the millimeter-wave frequency bands, and precision-impedance designs with smaller footprints and thickness. Heterogeneous integration in 3D ultra-thin packages with higher component densities and performance than with the existing 2D packages is needed to realize such 5G systems. This paper reviews the key building blocks of 5G systems and the underlying advances in packaging technologies to realize them.

5 November 2018 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
MAMuhammad Ali
Muhammad Ali
FLFuhan Liu
Fuhan Liu
AWAtom Watanabe
Atom Watanabe
PRP. Markondeya Raj
P. Markondeya Raj
VSVenkatesh Sundaram
Venkatesh Sundaram
RTRao R. Tummala
Rao R. Tummala
Package-integrated and ultra-thin low-pass filter (LPF) and bandpass filter (BPF) with footprint smaller than 0.5λ₀x0.5λ₀x0.025λ₀ at the operating frequencies of 28- and 39-GHz bands are presented for 5G and mm-wave small-cell application. Such package integration of 5G filters with ultrashort 3-D interconnects allows for low interconnect losses that are similar to that of on-chip filters, but low component insertion loss of off-chip discrete filters. These thin-film filters exhibit a cross-sectional height of 188.5 μm and can be utilized either as embedded components or integrated passive devices in module packages. Three topologies of LPF and BPF in total are modeled, designed, and fabricated on precision thin-film buildup layers on glass substrate as a core. Large-area panel-compatible semiadditive patterning (SAP) process is utilized to form high-precision topologies to aid the low-cost fabrication of ultraminiaturized filters. SAP also enables the realization of ultra-thin traces to precisely model high-impedance inductive lines compared to conventional subtractive etching and printing techniques. This results in filters with low insertion loss, low VSWR, and high selectivity. The simulated and measured results of filters show an excellent correlation.

21 September 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AWAtom O. Watanabe
Atom O. Watanabe
TLTong-Hong Lin
Tong-Hong Lin
MAMuhammad Ali
Muhammad Ali
YWYiteng Wang
Yiteng Wang
VSVanessa Smet
Vanessa Smet
MSMadhavan Swaminathan
Madhavan Swaminathan
This article presents the design and demonstration of a high-bandwidth antenna-in-package (AiP) module focusing on low-loss interconnects and Yagi-Uda antenna performance fabricated on a 100-μm low coefficient-of-thermal-expansion (CTE) glass for the 28-GHz band. It shows the modeling, design, and characterization of key technology building blocks along with the process development of advanced 3-D glass packages. The building blocks include impedance-matched antenna-to-die signal transitions, Yagi-Uda antenna, and 3-D active-passive integration with backside die assembly on 100-μm glass substrates. The design and stack-up optimization of antenna-integrated millimeter-wave (mm-wave) modules is discussed. Process development to achieve high-density interconnects and precise dimensional control in multilayered thin glass-based packages is also described. The characterization results of the key technology building blocks show an insertion loss of 0.021 dB per through-package via (TPV), leading to the whole-chain loss of less than 1 dB and a return loss lower than 20 dB. The fabricated Yagi-Uda antenna features high repeatability of wide bandwidth due to the process control enabled by glass substrates. The antenna measurements show a bandwidth of 28.2%, which covers the entire 28-GHz fifth-generation (5G) frequency bands (n257, n258, and n261). The flip-chip assembled low-noise amplifier with 80-μm solder balls shows a maximum gain of 20 dB as desired. The performance of the glass-based package integrated antennas is benchmarked to other 5G substrate technologies, such as organic laminates or co-fired ceramic-based substrates.

26 March 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
MAMuhammad Ali
Muhammad Ali
KHKai-Qi Huang
Kai-Qi Huang
MSMadhavan Swaminathan
Madhavan Swaminathan
PMPulugurtha Markondeya
Pulugurtha Markondeya
RTRao. R. Tummala
Rao. R. Tummala
Miniaturization of millimeter-wave (mm-wave) filters relies on innovative designs that require fine lines and spacings. These designs drive the need for precision fabrication that cannot be achieved with traditional laminates or co-fired ceramics. This gives unique performance justification to glass substrate technologies for future integrated mm-wave components because of both superior performance and 3-5X reduction in volume. In this paper, laminated glass-based compact inline stepped-impedance resonator (SIR) filters are presented for 5G new radio (NR) modules. The frequency bands of interest are 5G NR bands: n257 and n260. The filters are designed using microstrip transmission lines with fourth-order quasi-elliptic response with skew-symmetric feed. The enhanced transition responses of these filters provide transmission zeros (TZs) on either side of the passband. When these filters are designed for mm-wave applications, their dependency on accuracy of metal patterns increases significantly due to narrow linewidth and spacing requirements to realize moderate fractional bandwidths. Two inline SIR filters are fabricated using large-area, panel-compatible semi-additive patterning (SAP) process on precision redistribution layers (RDL) of a laminated glass substrate stackup. The sensitivity of these filters to the dimensional variations of patterned copper is analyzed, and discrepancy between simulated and measured response of the filters is studied by performing post-fabrication simulations.

3 August 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
MAMuhammad Ali
Muhammad Ali
AWAtom O. Watanabe
Atom O. Watanabe
TLTong-Hong Lin
Tong-Hong Lin
DODaichi Okamoto
Daichi Okamoto
PMPulugurtha Markondeya
Pulugurtha Markondeya
RTRao R. Tummala
Rao R. Tummala
Package-integrated and ultra-thin power dividers with footprint smaller than unit λ02 at the operating frequency of 28 GHz 5G new radio (NR) n257 and n258 bands are presented for the first time for small-cell applications. These power dividers are also configured as antenna arrays using end-fire Yagi-Uda antenna elements. Utilizing minimal matching techniques, two, three and four-element antenna arrays are designed without compromising on the bandwidth of operation or electrical performance. These thin-film power dividers exhibit a cross-sectional height of 147-μm and can be implemented in the top metal layer of front-end module packages. Panel-compatible semi-additive patterning (SAP) process is utilized to realize these structures which yields precise linespace dimensions required for millimeter-wave applications. This results in power dividers with low added insertion loss, low VSWR and minimal phase difference between output ports. The added-insertion loss is 25% less than similar structures reported on integrated fanout architectures. The antenna arrays exhibit high gain and efficiency. Excellent model-to-hardware correlation is observed with multiple coupons of the same structure. Package-integrated power dividers and antenna arrays based on ultra-thin laminated glass substrate represents a major step towards realizing compact mm-wave antenna-in-package for 5G small-cell applications.

1 June 2020
Verified
Conference Paper
Closed access
MAMuhammad Ali
Muhammad Ali
AWAtom Watanabe
Atom Watanabe
TKTakenori Kakutani
Takenori Kakutani
PMPulugurtha Markondeya
Pulugurtha Markondeya
RTRao. R. Tummala
Rao. R. Tummala
MSMadhavan Swaminathan
Madhavan Swaminathan
Package-integrated implementation of highly- miniaturized diplexers is presented for the first time on ultra-thin laminated glass substrates for millimeter-wave (mm-wave) applications in emerging RF front-end modules (FEM). The diplexers are designed using miniaturized, doubly- terminated bandpass filters which cover the 5G new radio (NR) mm-wave bands: n257, n258 and n260. Two different types of filters: hairpin and edge-coupled are modeled, designed and optimized for this non-contiguous diplexer demonstration. Since diplexer is a three-port device, the considerations for optimum RF performance as well as characterization are included in the modeling phase. From the fabrication standpoint, unlike conventional etching processes, panel-scale semi-additive patterning (SAP) process is utilized to form high-precision, fine-feature redistribution layers (RDL) on ultra-thin glass substrates to accurately realize the aforementioned passive components. These diplexers can be integrated with antennas on the top layer of a multilayered 5G module or they can be utilized as integrated passive devices (IPDs). An appropriately sized ground plane is sufficient to isolate the rest of the system from these diplexers, making them ideal for applications such as heterogeneously-integrated packages. The demonstrated diplexers, comprising of 5G NR band filters, exhibit low insertion loss, high stopband rejection, high selectivity, ease-of-integration in packages as well as small footprint. The simulated response of the fabricated diplexers is in excellent agreement with the measured results.