Leontin David

Dr. Leontin David


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Alexandra Daniela ScurtuAlexandra Daniela Scurtu
Alexandra Daniela Scurtu
EKEniko Kovacs
Eniko Kovacs
LSLacrimioara Senila
Lacrimioara Senila
Erika LeveiErika Levei
Erika Levei
Dorina SimedruDorina Simedru
Dorina Simedru
LDLeontin David
Leontin David
Due to the current concern with the environmental impacts produced by the construction industry, many studies have been conducted to capitalize on the advantages of waste to develop sustainable materials. The study reports an innovative, non-conventional cement-based composite material containing 10 wt.% vine shoot waste, representing a step forward toward the use of this lignocellulosic waste. The investigations were carried out using scanning electron microscopy with energy dispersive X-ray analysis, Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and solid-state 27Al and 29Si nuclear magnetic resonance spectroscopy. The addition of vine shoot waste to the cement paste increases the amount of hydration products (calcium silicate hydrate (CSH), calcium hydroxide (CH), calcium carbonate (CaCO3) and ettringite), leading to a more compact and dense structure. The structural characterization techniques also confirmed the formation of a higher amount of hydration products in the case of vine shoot waste added to the cement paste.

Verified
Journal Article
Open access
PDF file
BIBrezestean Andreea Ioana
Brezestean Andreea Ioana
AGAna Maria Raluca Gherman
Ana Maria Raluca Gherman
Alia ColnitaAlia Colnita
Alia Colnita
Nicoleta Elena DinaNicoleta Elena Dina
Nicoleta Elena Dina
MCMolnar Csilla
Molnar Csilla
Simona Cinta PinzaruSimona Cinta Pinzaru
Simona Cinta Pinzaru
Nodularin (NOD) is a potent toxin produced by Nodularia spumigena cyanobacteria. Usually, NOD co-exists with other microcystins in environmental waters, a class of cyanotoxins secreted by certain cyanobacteria species, which makes identification difficult in the case of mixed toxins. Herein we report a complete theoretical DFT-vibrational Raman characterization of NOD along with the experimental drop-coating deposition Raman (DCDR) technique. In addition, we used the vibrational characterization to probe SERS analysis of NOD using colloidal silver nanoparticles (AgNPs), commercial nanopatterned substrates with periodic inverted pyramids (KlariteTM substrate), hydrophobic Tienta® SpecTrimTM slides, and in-house fabricated periodic nanotrenches by nanoimprint lithography (NIL). The 532 nm excitation source provided more well-defined bands even at LOD levels, as well as the best performance in terms of SERS intensity. This was reflected by the results obtained with the KlariteTM substrate and the silver-based colloidal system, which were the most promising detection approaches, providing the lowest limits of detection. A detection limit of 8.4 × 10−8 M was achieved for NOD in solution by using AgNPs. Theoretical computation of the complex vibrational modes of NOD was used for the first time to unambiguously assign all the specific vibrational Raman bands.

28 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
Alexandra Daniela ScurtuAlexandra Daniela Scurtu
Alexandra Daniela Scurtu
LDLeontin David
Leontin David
Erika LeveiErika Levei
Erika Levei
Dorina SimedruDorina Simedru
Dorina Simedru
XFXenia Filip
Xenia Filip
Oana CadarOana Cadar
Oana Cadar
The expansion of the construction industry requires large quantities of construction materials; therefore, the utilization of alternative raw materials that reduce the environmental impact and enhance the quality of the construction materials has received increasing interest. The comparative performance of 1% Dynamon SR3 or Dynamon SR41 superplasticizers on the properties of cement paste with 1 wt.% vine shoot waste addition (VSW) was investigated after 28 days using Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), and solid-state 27Al and 29Si nuclear magnetic resonance (NMR) spectroscopy. VSW does not delay the formation of calcium hydroxide and C–S–H and a slight decrease of the –OH band in samples containing superplasticizers, suggesting that free lime is converted to carbonates. The highest degree of crystallinity was remarked for the samples with superplasticizers. The structure of the cement paste with VSW and superplasticizers was corroborated with mechanical properties, showing increased strength in using VSW and superplasticizers. The results showed that adding 1% VSW and superplasticizers does not change the performance of the cement paste but reduces the water-cement ratio. The combination of VSW and superplasticizers led to cement composite with improved structural and mechanical properties suitable for construction.

26 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
IPIoan Petrovai
Ioan Petrovai
Otto Todor-BoerOtto Todor-Boer
Otto Todor-Boer
LDLeontin David
Leontin David
Ioan BotizIoan Botiz
Ioan Botiz
In this work, we subjected hybrid lead-mixed halide perovskite (CH3NH3PbI3–xClx) precursor inks to different solvent evaporation rates in order to facilitate the nucleation and growth of perovskite crystals. By controlling the temperature of perovskite solutions placed within open-air rings in precise volumes, we established control over the rate of solvent evaporation and, thus, over both the growth rate and the shape of perovskite crystals. Direct utilization of diluted lead-mixed halide perovskites solutions allowed us to control the nucleation and to favor the growth of only a low number of perovskite crystals. Such crystals exhibited a clear sixfold symmetry. While crystals formed at a lower range of temperatures (40–60 °C) exhibited a more compact dendritic shape, the crystals grown at a higher temperature range (80–110 °C) displayed a fractal dendritic morphology.

23 December 2025 in Forests
Verified
Journal Article
Open access
PDF file
PTPetru Truta
Petru Truta
IMIrina M. Morar
Irina M. Morar
MSMarius-Razvan Stefan
Marius-Razvan Stefan
GEGal Emese
Gal Emese
CDCatalina Dan
Catalina Dan
LDLeontin David
Leontin David
Tree bark is a chemically rich but underexploited forest byproduct that can support circular bioeconomy strategies. This study investigates how provenance and drying temperature influence the structural and chemical composition of Larix decidua Mill. bark, aiming to support genotype selection and biomass valorization. The experimental design included bark collected from seven distinct provenances and subjected exclusively to controlled drying at three temperatures (60 °C, 80 °C, and 100 °C), enabling a focused assessment of thermally induced chemostructural variation. Bark samples from seven Romanian provenances were exposed to four drying treatments (control, 60 °C, 80 °C, 100 °C) and examined using FT-IR and GC–MS. FT-IR spectra revealed temperature-dependent shifts in O–H, C–H, and C=O regions, indicating subtle rearrangements in lignin, cellulose, and hemicellulose structures. GC–MS profiling identified major terpenoid, ester, amide, and diterpenoid/triterpenoid derivatives whose concentrations varied significantly across both thermal regimes and genetic origins. Moderate heating (60–80 °C) enhanced the release or stabilization of α-pinene, larixol, and several esterified or diterpenoid compounds, whereas 100 °C promoted oxidative transformations, increasing lipid-derived amides and resin-oxidation products such as caryophyllene oxide. Provenances from cooler, mid-altitude regions showed higher terpenoid abundance and greater thermochemical stability, while southern provenances accumulated more oxidative derivatives under high-temperature exposure. The strong provenance × temperature interactions highlight genetically driven variation in thermochemical plasticity. These findings provide a basis for identifying elite genotypes suitable for resin-oriented breeding and for optimizing temperature-controlled bark processing within sustainable biomass valorization frameworks.

26 November 2025 in Molecules
Verified
Journal Article
Open access
PDF file
Alexandra Daniela ScurtuAlexandra Daniela Scurtu
Alexandra Daniela Scurtu
Erika LeveiErika Levei
Erika Levei
EKEniko Kovacs
Eniko Kovacs
LSLacrimioara Senila
Lacrimioara Senila
Oana CadarOana Cadar
Oana Cadar
LDLeontin David
Leontin David
The valorization of agricultural byproducts plays a critical role in advancing the circular economy. Vine cultivation produces significant amounts of biomass waste throughout the year, posing environmental challenges if left unmanaged. This study investigates the potential reuse of vine shoot waste and its derived ash as alternative components in cement-based materials. The properties of the composites containing 1% vine shoot waste or its derived ash incorporated in cement paste were comparatively assessed with those of cement paste prepared from Portland cement based on the Fourier-transform infrared spectra, X-ray diffraction patterns, scanning electron microscopy images, EDX elemental maps, and solid-state 27Al and 29Si nuclear magnetic resonance spectra and thermal analysis. Mechanical performance was assessed through flexural and compressive strength tests. The results confirm the potential of vine shoot waste use as a sustainable additive in cementitious materials and its contribution to reducing the environmental footprint of the cement industry.