Active clamp circuits are key to minimize electrical overshoot and undershoot and minimize reflected signals and achieve performance objectives and reliability requirements in high performance CMOS circuits. This paper discusses for the first time the electrostatic discharge (ESD) protection circuits of silicon-on-insulator (SOI) active clamp networks, dynamic threshold MOSFET SOI ESD techniques and the synthesis of DTMOS concepts, ESD protection networks, and active clamp circuitry for high-pin-count high-performance semiconductor chips.
27 August 2025 in Journal of Materials Research and Technology
Forging plays a crucial role in various industries, including aerospace, automotive, oil and gas, and defense. We investigated the effect of post-processing forging on microstructural and mechanical properties of 316L stainless steel forging preforms fabricated by laser powder bed fusion. The as-built samples were subjected to hot forging in order to refine the microstructure and enhance mechanical performance. Detailed characterization was performed using Electron Backscatter Diffraction, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, Tensile testing, and Hardness Testing. Substantial grain refinement (up to 97%) was observed, in addition to a reduction in porosity. The forging process effectively transformed the columnar grain morphology into equiaxed grains, increased yield and ultimate tensile strengths of 560 MPa and 740 MPa, representing 27% and 32% improvements, respectively, with a corresponding decrease in elongation to 32% from 47%. The horizontally built samples achieved the highest yield strength of 605 MPa but slightly lower UTS 710 MPa, representing 32% and 5% increment and decrease in ductility to 28% from 37.5%. These trends reflect the combined effects of work hardening and grain refinement, which enhance strength at the expense of ductility.
We present a wet-spinning technique capable of producing continuous polymer nanofibers. This method involves injecting a solvated polymer into a highly viscous moving medium through a microaperture. The extruded fiber moves in a predictable spiral path and is collected around a spinning mandrel which also serves to pull the extruded fiber away from the aperture. Semicontinuous, solid nanofibers of polyvinyl butyral were produced with diameters ranging from . Electron microscopy indicates that submicron fibers exhibit a ribbonlike morphology. The effect of different processing parameters on the fiber size and shape is discussed.