Xiukuo Sun

Dr. Xiukuo Sun

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
XSXiukuo Sun
Xiukuo Sun
SLShouding Li
Shouding Li
XLXiao Li
Xiao Li
GLGuanfang Li
Guanfang Li
BZBo Zheng
Bo Zheng
TMtianqiao mao
tianqiao mao
Shale oil is one of the most promising alternative unconventional energies in the world, and recently the Lucaogou Formation showed significant exploration potential, becoming the primary target in northwestern China. This paper focuses on the mechanical properties and fracture characteristics of shale layered samples from the Lucaogou Formation, conducting uniaxial compressive tests with real-time micro-CT scanning, as well as mineral analysis after failure. It has been found that the mechanical and fracture features are both related to the composition, distribution, content and particle size of minerals, as well as natural fractures. The main crack tends to form in the weak mineral band, for example, calcite or clay band. Since the discontinuous stress usually forms at the interfaces of different minerals, the sample with several major minerals of close content is easier to break into a fractured zone, causing lower uniaxial compressive strength and elastic modulus, compared with the composition of only one dominant mineral. Also, the region will be more fractured after failure if the mineral particles there become smaller. Additionally, although natural cracks have a certain influence on the development of new fractures, not all of the natural ones will propagate into the final fracture network, some of them are just compacted and closed.

1 December 2024 in Petroleum Science
Verified
Journal Article
Open access
XSXiukuo Sun
Xiukuo Sun
SLShouding Li
Shouding Li
XLXiao Li
Xiao Li
GLGuan-Fang Li
Guan-Fang Li
BZBo Zheng
Bo Zheng
JGJing-Yun Guo
Jing-Yun Guo

31 March 2026 in Materials
Verified
Journal Article
Open access
PDF file
MYMa Yingwen
Ma Yingwen
XFXing Fu
Xing Fu
YWYi Wu
Yi Wu
ZCZhou Changsuo
Zhou Changsuo
XJXue Jiawen
Xue Jiawen
XSXiukuo Sun
Xiukuo Sun
The exploitation of deep oil and gas resources faces challenges posed by complex high-temperature and high-pressure environments. Understanding the mechanical behavior of reservoir rocks under such conditions is therefore critical for ensuring engineering safety. Most existing studies utilize reservoir rock samples at ambient temperature or subjected to high-temperature pretreatment for conventional triaxial tests. However, research on the mechanical response under the coupled conditions of real-time high temperature and in situ true triaxial stress remains limited. To address this gap, this study employed a self-developed in situ true triaxial testing system capable of simultaneous high-temperature and high-pressure loading. Systematic in situ true triaxial mechanical tests were conducted on granite under temperatures up to 200 °C and confining pressures up to 200 MPa. After fracturing, the three-dimensional crack morphology was obtained using CT scanning, and quantitative characterized based on the average crack width and fractal dimension, systematically investigating the effects of temperature, intermediate principal stress (σ2), and minimum principal stress (σ3) on the mechanical parameters and fracture characteristics of granite. In this study, the results indicate that over the temperature range of 25–200 °C, the peak strength and elastic modulus decrease by approximately 11–18% and 15–40%, respectively, while the peak strain increases by 4–20%. The failure mode transitions gradually from a tensile–shear composite fracture at room temperature to a predominantly shear fracture at elevated temperatures. The rock brittleness is reduced, thus the damage zone expands, and macroscopic fractures decrease. Correspondingly, the average fracture width decreases from approximately 0.66 mm to 0.55 mm, and the fractal dimension increases from about 2.28 to 2.38. An increase in σ2 leads to a 19–26% increase in peak strength and a 33–75% increase in elastic modulus, while also increasing the average fracture width and decreasing the fractal dimension. Also, the rock brittleness increases, and the failure mode shifts from tensile–shear composite fracture to shear fracture. An increase in σ3 results in an approximately 11% increase in peak strength, a 30% increase in peak strain, and a 21% decrease in elastic modulus, accompanied by a decrease in average fracture width and an increase in fractal dimension. This suppresses the formation of a single dominant fracture surface, consequently increasing the complexity of the fracture morphology. This research reveals the mechanical response and failure laws of deep granite under high-temperature and true triaxial conditions, providing important insights for understanding the mechanical properties of deep reservoir rocks and for the design of drilling and fracturing operations.

18 March 2025
Verified
Conference Paper
Open access
XSXiukuo Sun
Xiukuo Sun
JLJuan Li
Juan Li
SLShouding Li
Shouding Li
YWYanfang Wu
Yanfang Wu
SZShuo Zhang
Shuo Zhang
XLXiao Li
Xiao Li
The rock characteristic and size-frequency distribution (SFD) on Mars are important for understanding the geologic and geomorphic history of the surface, for evaluating the trafficability of roving, and for planning the potential infrastructure construction. Tianwen-1, China’s first autonomous Mars exploration mission, formed an excavated depression during touchdown, which has been the deepest one on the Martian surface so far compared with others. According to the images captured by the Navigation and Terrain Cameras (NaTeCams) onboard the rover, Zhurong, the SFD of rocks is calculated and compared inside the excavated depression, within and out of the blast zone. For the first time, the rock size-distribution inside the excavated depression is obtained, exposing the geological features of the shallow subsurface on Mars at a depth of tens of centimeters, which will surely be important for future drilling missions. It is found that the rock abundance in the depression is smaller than the original abundance on the surface, and the distribution of rocks in the blast zone on the surface is greatly influenced by the touchdown. Besides, based on the fractal dimension of rock sizes, the rocks (>10 mm) at the shallow subsurface of the Zhurong landing site may experience two different geological processes.