This research reports the significance of influence of speed, feed and depth of cut on cutting force and surface roughness while working with tool made of ceramic with an Al2O3+TiC matrix (KY1615)and the work material of AISI 1050 steel (hardness of 484 HV). Experiments were conducted using Johnford TC35 Industrial type of CNC lathe. Taguchi method (L27 design with 3 levels and 3 factors) was used for the experiments. Analysis of variance with adjusted approach has been adopted. The results have indicated that it is feed rate which has significant influence both on cutting force as well as surface roughness. Depth of cut has a significant influence on cutting force, but has an insignificant influence on surface roughness. The interaction of feed and depth of cut and the interaction of all the three cutting parameters have significant influence on cutting force, whereas, none of the interaction effects are having significant influence on the surface roughness produced. If power consumption minimization is to be achieved for the best possible surface finish, the most recommended combination of feed rate and depth of cut is also determined
15 February 2015 in International Journal of Vehicle Structures & Systems
Rail vehicle-track modeling and simulations, in past many years is developed a long way from its origins as a research tool. This paper presents an overview of the current features and applications for components of rail vehicle-track dynamic modeling and few challenges which these applications find while doing the simulations. This paper discusses appropriate modeling choices for different applications and analyse the best practice for the optimum performance of suspension components, wheel-rail contact conditions and modeling inputs such as track geometry.
13 April 2023 in Journal of the Chinese Institute of Engineers
In this paper, a twenty-one degrees of freedom mathematical model of a railway vehicle is formulated, considering its main components (i.e. carbody, bolster, bogie frame, and wheel axle) as rigid for the rigid body analysis of ride behavior of the vehicle. The ride comfort of the vehicle is analyzed and optimized using ISO 2631 criteria. Further, vertical flexibility of the carbody is accounted for with few modifications in the model, and the effect of vertical stiffness on ride behavior is analyzed and compared with a rigid carbody analysis using the Spering ride index. The carbody bending frequencies are investigated using the covariance method, and it is found that the reduction in stiffness of carbody beyond a specific frequency introduces significant carbody acceleration and declines the vehicle ride. The increased carbody bending frequencies can achieve higher vehicle speed and adequate isolation from track excitations.
29 August 2018 in International Journal of Vehicle Structures & Systems
Railway vehicle is one of the rigorously developing passenger and goods carrier in the past few centuries. Dynamic behaviour of the railway coach is a vital aspect in its design and also in terms of passenger safety and ride comfort. Dynamic response includes both deterministic and probabilistic analyses. Modal, harmonic and transient dynamic analysis is part of deterministic analyses, whereas random response using spectrum methods and power spectral density (PSD) is a probabilistic approach. This paper is an attempt to cover various modelling and simulation methods of the railway bogie and coach adopted by various researchers to understand the dynamic behaviour of the railway coach. Further, the research findings of various dynamic parameters obtained theoretically and practically against different inputs like sinusoidal and random inputs to the car body have been discussed. This forms a basis in understanding the development of railway coach design when one is interested in carrying out free and forced vibration analysis on the coach, as well as assists to optimize various design parameters of components like bogie, car body and suspension elements in terms of vehicle dynamics.
Magnesium alloy of grade AZ91D is utilized for a variety of applications in aircraft design and frames, as well as vehicle engine radiators, bumpers, and suspension components to reduce the weight of automobiles. This research compared the mechanical, corrosion, wear, and erosion resistance of pure Mg to that of AZ91 alloy. The corrosion media was NaCl, NaOH, and MgSO4, and the weight loss method was utilised to evaluate corrosion. The pin-on-disc configuration was utilized to assess the dry sliding wear mechanism of the Pure Mg and AZ91D alloy. Pure monolithic Mg and AZ91D magnesium alloy have a low resistance to wear as a result of an increase in contact temperature brought about by a shift of operational conditions. Erosive wear is caused when solid particles in a liquid or air jet strike a surface. Significantly influencing the erosive wear are particle velocity, impact angle, and erodent particle size. In this work, the erosive wear of AZ91D was studied using an Air jet erosion tester. SiO2 was used as the eroding material, and the flow rate of the eroding material and air was 5 gm min−1. The erosive factor experiments are designed using Taguchi orthogonal array (L16). The erosive factor response is erosion rate and primarily regulated by three factors as angle (30°, 45°, 60°, and 90°), time (5 and 10 min) and, contact pressure (1 and 2 bar). The results of the experiments showed that the rate of wear increased with increasing pressure, and that the angle of impact of the jet at 60° caused the most wear of any of the tested angles. Analysis of variance (ANOVA) shows that time is the most important factor in determining erosive rate for AZ91D. SEM is used to investigate the structure and morphology of worn-out materials, and its findings are then confirmed.
24 November 2023 in National Academy Science Letters