The purpose of the study was to analyze the influence of the quality class and the orthotropy of wood upon the sound absorption coefficient, the reflection and the impedance ratio of two species widely used for stringed musical instruments, namely spruce (Picea abies L. Karst) and maple (Acer pseudoplatanus L.). An impedance tube for the frequency range 100–6400 Hz was used in these experimental determinations. Knowing the influence of porosity and tortuosity on the acoustic absorption, these properties were also determined, as well as the sound reduction coefficient and the maximum values of the acoustic absorption coefficients in relation to frequency. The main results highlighted the differences between the anatomical quality class of the wood within each species, but also concerning the sound direction relative to the three main sections of wood, as an orthotropic material. The article highlights the acoustic performance parameters related to the frequency of the wooden material and its relationship to density, porosity and quality class. The results represent useful information for musical instruments manufacturers and more.

This paper examines effective and environmentally friendly materials intended for noise insulation and soundproofing applications, starting with materials that have gained significant attention within last years. Foam-formed materials based on cellulose fibers have emerged as a promising solution. The aim of this study was to obtain a set of foam-formed, porous, lightweight materials based on cellulose fibers from a resinous slurry pulp source, and to investigate the impact of surfactant percentage of the foam mixtures on their noise insulation characterisitcs. The basic foam-forming technique was used for sample assembly, with three percentages of sodium dodecyl sulphate (as anionic surfactant) related to fiber weight, and a standardised sound transmission loss tube procedure was used to evaluate noise insulation performance. Results were obtained as observations of internal structural configurations and material characteristics, and as measurements of sound absorption/reflection, sound transmission loss, and surface acoustic impedance. Based on the findings within this study, the conclusions highlight the strong potential of these cellulosic foams to replace widely used synthetic materials, at least into the area of practical noise insulation applications.

The study investigates the effect of the type of varnish and the number of layers on some acoustic properties of the resonance spruce in combination with the changes produced in some physical, morphological, and chemical properties of wood. In addition to color changes and surface chemistry, the surface roughness and morphology are modified by the thickness of the varnish film, 10 layers being optimal from this point of view, as well as the oil‐based finish. The sound absorption coefficient increases with the number of varnish layers and varies with the sound frequency range, varnish type, and wood quality, all contributing to the acoustic tunability. For example, for a sound frequency of 1.5 kHz, it is observed that the oil‐based varnish with 5 and 10 layers contributes to a full sound, while the alcohol varnish, due to a lower absorption coefficient for this frequency, can lead to some nasal sounds. Applying more than 10 layers of varnish does not improve the sound performance as it will soften the sound in an oil‐based finish and make the sound too sharp in the case of alcohol–varnished wood.

The study presented in this paper investigates the influence of coating polymers on the acoustic properties of resonant spruce wood. It evaluates absorption, acoustic reflection, and resonance frequency spectrum characteristics in both unvarnished and varnished samples, with the interface between the coating polymer and the wood modifying the acoustic response. The novelty of the research consists in evaluating the acoustic and dynamic parameters of resonant spruce wood boards, varnished with varnishes with different chemical properties (oil-based varnish, spirit varnish, nitrocellulose varnish). The study focuses on the influence of the type of varnish and the thickness of the varnish film on the frequency spectrum, damping coefficient, quality factor, acoustic absorption coefficient, and sound reflection. The sound absorption coefficient increases with the number of varnish layers and is influenced by the sound’s frequency range, the type of varnish, and the quality of the wood—factors that collectively enhance acoustic performance. For instance, oil-based varnish applied in 5 or 10 layers contributes to a fuller sound at a frequency of 1.5 kHz. In contrast, spirit varnish, which has a lower acoustic absorption coefficient at this frequency, and a reduced damping coefficient, can lead to a nasal tone, although the frequency spectrum turns out to have the richest. Applying more than 10 layers of varnish softens the sound when using oil-based varnish but sharpens it with spirit varnish on resonant wood. Thus, the acoustic performance of a soundboard can be tailored by selecting the appropriate varnishing system and number of layers applied. However, a detailed analysis of the timbre of musical instruments finished with these varnishes is necessary to confirm their influence on the acoustic quality of the instruments.

Cellulose-based foams present a high potential for noise insulation applications. These materials are bio-degradable, eco-friendly by both embedded components and manufacturing process, have low density and high porosity, and are able to provide good noise insulation characteristics compared with available petroleum-based foams currently used on a large scale. This paper presents the results of some investigations performed by the authors in order to improve the functional characteristics in terms of free surface wettability and structural integrity. Native xylan and xylan-based derivatives (in terms of acetylated and hydrophobized xylan) were taken into account for surface treatment of cellulose foams, suggesting that hemicelluloses represent by-products of pulp and paper industry, and xylan polysaccharides are the most abundant hemicelluloses type. The investigations were mainly conducted in order to evaluate the level to which surface treatments have affected the noise insulation properties of basic cellulose foams. The results indicate that surface treatments with xylan derivatives have slowly affected the soundproofing characteristics of foams, but these clearly have to be taken into account because of their high decrease in wettability level and improving structural integrity.