Wireless sensor networks (WSNs) are an emerging technology employed in some crucial applications. However, limited resources and physical exposure to attackers make security a challenging issue for a WSN. Ring oscillator-based physical unclonable function (RO PUF) is a potential option to protect the security of sensor nodes because it is able to generate random responses efficiently for a key extraction mechanism, which prevents the non-volatile memory from storing secret keys. In order to deploy RO PUF in a WSN, hardware efficiency, randomness, uniqueness, and reliability should be taken into account. Besides, the resistance to electromagnetic (EM) analysis attack is important to guarantee the security of RO PUF itself. In this paper, we propose a novel architecture of configurable RO PUF based on exclusive-or (XOR) gates. First, it dramatically increases the hardware efficiency compared with other types of RO PUFs. Second, it mitigates the vulnerability to EM analysis attack by placing the adjacent RO arrays in accordance with the cosine wave and sine wave so that the frequency of each RO cannot be detected. We implement our proposal in XINLINX A-7 field programmable gate arrays (FPGAs) and conduct a set of experiments to evaluate the quality of the responses. The results show that responses pass the National Institute of Standards and Technology (NIST) statistical test and have good uniqueness and reliability under different environments. Therefore, the proposed configurable RO PUF is suitable to establish a key extraction mechanism in a WSN.
Static Random Access Memory (SRAM) Physical Unclonable Functions (PUFs) are some of the most popular PUFs that provide a highly-secured solution for secret key storage. Given that PUF responses are noisy, the key reconstruction must use error correcting code (ECC) to reduce the noise. Repetition code is widely used in resource constrained systems as it is concise and lightweight, however, research has shown that repetition codes can lead to information leakage. In this paper we found that the strongest cell distribution in a SRAM array may leak information of the responses of SRAM PUF when the repetition code is directly applied. Experimentally, on an ASIC platform with the HHGRACE 0.13 μm process, we recovered 8.3% of the measured response using the strongest cells revealed by the helper data, and we finally obtained a clone response 79% similar to weak response using the public helper data. We therefore propose Error Resistant Fuzzy Extractor (ERFE), a 4-bit error tolerant fuzzy extractor, that extracts the value of the sum of the responses as a unique key and reduces the failure rate to 1.8 × 10−8 with 256 bit entropy.
Power consumption and communication distance have become crucial challenges for SIM card RFID (radio frequency identification) applications. The combination of long distance 2.45 GHz radio frequency (RF) technology and low power 2 kHz near distance communication is a workable scheme. In this paper, an ultra-low frequency 2 kHz near field communication (NFC) method suitable for SIM cards is proposed and verified in silicon. The low frequency transmission model based on electromagnetic induction is discussed. Different transmission modes are introduced and compared, which show that the baseband transmit mode has a better performance. The low-pass filter circuit and programmable gain amplifiers are applied for noise reduction and signal amplitude amplification. Digital-to-analog converters and comparators are used to judge the card approach and departure. A novel differential Manchester decoder is proposed to deal with the internal clock drift in range-controlled communication applications. The chip has been fully implemented in 0.18 µm complementary metal-oxide-semiconductor (CMOS) technology, with a 330 µA work current and a 45 µA idle current. The low frequency chip can be integrated into a radio frequency SIM card for near field RFID applications.
The Short-range-controlled communication system (RCC) based on a subscriber identity module (SIM) card is a replacement for the standard near-field communication (NFC) system to support near-field payment applications. The RCC uses both the low-frequency (LF) and high-frequency (HF) wireless communication system. The RCC communication distance is controlled under 10 cm. However, current RCCs suffer from compatibility issues, and the LF communication distance is lower than 0.5 cm in some phones with completely metallic shells. In this paper, we propose an improved LF communication system design, including an LF transmitter circuit, LF receiver chip, and LF-HF communication protocol. The LF receiver chip has a rail-to-rail amplifier and a self-correcting clock recovery differential Manchester decoder, which do not have the limitations of accurate gain and high system clock. The LF receiver chip is fabricated in a 0.18 m CMOS technology platform, with a die size of 1.05 mm × 0.9 mm and current consumption of 41 A. The experiments show that the improved RCC has better compatibility, and the communication distance reaches to 4.2 cm in phones with completely metallic shells.