Considering the nonlinear, time-varying, and multivariate coupling nature of the welding process, achieving excellent control of the welding process can be challenging. In addition, welding experience varies from person to person, making it difficult to establish a uniform standard. In this work, rough set theory is introduced and applied to arc welding process modeling and quality control to achieve effective online control of weld penetration during welding. A variable precision neighborhood rough-fuzzy method is proposed to enhance the efficiency and adaptability of rough set theory for information processing in the welding process. By designing welding experiments with different gaps and currents, descriptors such as the tail area coefficient and the length-width ratio of the melt pool have been proposed to characterize the melt pool. Rough set theory has been used to extract decision classification rules for welding percolation state information, and clustering analysis, fuzzy logic, and min-max fuzzy methods have been introduced for knowledge modeling. The proposed variable precision neighborhood rough-fuzzy control model is verified via three sets of experiments, and the results show that the model has excellent stability and effectiveness.
The establishment of the correspondence between the important features of the topside weld pool and the penetration state is a key link in penetration control. This article presents a scheme of variable gap welding penetration control based on rough-fuzzy modeling. By utilizing the basic concepts of variable precision rough sets and conditional information entropy, relevant algorithms for attribute reduction and rule extraction in decision information systems are addressed. Raw data for modeling are obtained through current–gap combination experiments, and then rough-set-based knowledge acquisition algorithms are used to generate classification rules for the penetration state. Based on the correspondence between the important features of the topside pool and the penetration state, a fuzzy control model is established. Welding experiments under variable gaps are conducted to examine the proposed control scheme, and the results indicate that the weld has good penetration and meets the requirements of welding specifications.
Femtosecond laser processing offers considerable potential for precision dental treatment and restoration, yet the ablation characteristics of different beam types in dentin remain insufficiently understood. This study compared Gaussian- and Bessel-beam processing for the fabrication of dentinal microgrooves. Gaussian-beam processing produced well-defined microgrooves with depths of up to 2179µm. Combining axial focal-position adjustment with array scanning enabled controllable three-dimensional fabrication, with a strong linear relationship between microgroove width and depth (R 2 =0.992). The maximum depth was approximately 1 order of magnitude greater than that obtained using fixed-focus processing. In contrast, under the available laser power and optical configuration, Bessel-beam irradiation at a nominal incident fluence of 2.829J/cm 2 did not produce stable deep ablation. The resulting morphology was mainly associated with cumulative energy deposition rather than efficient material removal. These findings clarify the different processing behaviors of Gaussian and Bessel beams in dentin and provide practical guidance for fabricating deep dentinal microstructures. This work may support the further development of femtosecond-laser techniques for precision dental treatment and restoration.