The Streak-Tube Imaging Lidar (STIL) has been widely used in high-precision measurement systems due to its ability to capture detailed spatial and temporal information. In this paper, we proposed a ranging measurement method that integrates a Time-to-Digital Converter (TDC) with a streak camera in a remote STIL system. In this method, the TDC accurately measures the trigger pulse time, while the streak camera captures high time-resolution images of the laser echo, thereby enhancing both measurement accuracy and range. A corresponding ranging model is developed for this method. To validate the system’s performance, an outdoor experiment covering a distance of up to 6 km was conducted. The results demonstrate that the system achieved a distance measurement accuracy of 0.1 m, highlighting its effectiveness in long-range applications. The experiment further confirms that the combination of STIL and TDC significantly enhances accuracy and range, making it suitable for various long-range, high-precision measurement tasks.
Long-range airborne streak tube imaging lidar (ASTIL) raw echo images are degraded by atmospheric speckle, detector noise, and weak-return fluctuations, which can bias centroid localization before range calculation. This study presents a lightweight preprocessing method combining row–column geometry-aware echo region pre-classification with frequency-domain histogram-based adaptive suppression. Candidate regions are extracted from normalized streak images, classified by row–column morphology, filtered using local magnitude-spectrum percentile thresholds, and fused with a background-constrained weighted strategy. Simulated echo images, simulated point clouds, and 6 km airborne data were used for validation. In selected building roof control regions, the mean elevation root mean square error (RMSE) decreased from 0.34 m to 0.29 m, the mean absolute error (MAE) from 0.30 m to 0.26 m, and the mean roof elevation standard deviation from 0.19 m to 0.15 m, corresponding to an approximately 21% reduction in roof-level point cloud thickness. The results show that preprocessing before centroid extraction can improve roof-level vertical consistency without neural-network training or complex point cloud post-processing.
Wide-area building-structure mapping from long-range airborne LiDAR requires image products that can represent building footprints, roof-height variations, and structural discontinuities with low computational latency. Airborne streak-tube imaging LiDAR (ASTIL) records a spatial–temporal echo image for each laser pulse, where the detector row corresponds to the fan-beam spatial angle, the detector column encodes echo arrival time, and the frame sequence represents the scanning process. This row–column–frame topology makes it possible to generate image-domain structural products directly from raw streak-tube echo sequences. In this paper, a relative-height image generation method is proposed for long-range ASTIL. The method constructs slant-range matrices from raw echo images, suppresses row-wise ground-related range trends, maps the residuals into relative-height values, and generates scan-geometry-calibrated swath-level relative-height images using lightweight calibration rather than rigorous point-wise POS/IMU trajectory reconstruction. Airborne experiments at 2 km, 3 km, and 6 km flight heights show that the proposed workflow can generate relative-height images with spatial sampling intervals of 0.30 m, 0.45 m, and 0.90 m, respectively, within a 0.5 s acquisition window. The generated cropped image products occupy less than 0.3% of the raw streak-image sequence volume, reflecting a compact image-domain representation for rapid preliminary mapping rather than lossless data compression. Building-scale comparisons with UAV LiDAR reference data indicate that the generated images preserve the main building footprints, boundary orientations, and roof-height discontinuities. For nine flat-roof targets, the mean absolute roof-to-ground height errors range from 0.24 m to 0.30 m across the three flight heights. These results suggest that ASTIL relative-height imaging can provide an efficient image-domain representation for wide-area building-structure mapping under long-range airborne observation conditions.