In this paper, a ground target extraction system for a novel LiDAR, airborne streak tube imaging LiDAR (ASTIL), is proposed. This system depends on only a single echo and a single data source, and can achieve fast ground target extraction. This system consists of two modules: Autofocus SSD (Single Shot MultiBox Detector) and post-processing. The Autofocus SSD proposed in this paper is used for object detection in the ASTIL echo signal, and its prediction speed exceeds that of the original SSD by a factor of three. In the post-processing module, we describe in detail how the echoes are processed into point clouds. The system was tested on a test set, and it can be seen from a visual perspective that satisfactory results were obtained for the extraction of buildings and trees. The system mAPIoU=0.5 is 0.812, and the FPS is greater than 34. The results prove that this ASTIL processing system can achieve fast ground target extraction based on a single echo and a single data source.
Airborne streak tube imaging LiDAR (STIL) consists of several different data-generating subsystems and introduces system errors each time it is installed on an aircraft. These errors change with each installation, which makes the parametric calibration of the LiDAR meaningless. In this study, we propose a high-precision reconstruction method for point clouds that can be used without calibrating the system parameters. In essence, after each remote sensing measurement, a self-checking process is performed with experimental data to replace the fixed system parameters. In this process, the splicing error of the same region measured under different conditions is used as a criterion to optimize the reconstruction parameters via a particle swarm optimization (PSO) algorithm. For a detection distance of 3000 m, the elevation error of the point cloud reconstruction reaches more than 1 m if the placement parameters are not optimized; after optimization, the elevation error can be controlled within 0.3 m.
Dion-Jacobson (DJ) structured quasi-2D perovskites are promising candidates for new generation gain medium due to their excellent photoelectric performance, super environmental, and structure stability. The isolated carrier recombination with inhomogeneous mixed phase is detrimental in enhancing amplified spontaneous emission (ASE) of optically pumped DJ phase quasi-2D perovskites lasers. Here, in 1.3-propanediamine (PDA)-based DJ perovskites, the carrier dynamic behavior from the pristine sample to the Cremophor EL (Cre EL) treated sample is unraveled. Remarkably, the Cre EL treated sample displays a well-proportioned large n domain distribution, resulting in an increased radiation-state density and hence enhancing collaboration emitting between carriers. The improved collaboration emitting promotes carriers' fast relay radiation, resulting in a higher ASE performance with a threshold reduced from 11.7 to 4.8μJ/cm2, optical gain coefficient increased from 775 to 1559cm-1 and degree-of-polarization (DOP) improved from 0.59 to 0.98. Our findings suggest that the development of DJ structured quasi-2D perovskite laser gain medium should target facilitating fast carrier co-radiation recombination.