Hardfacing is commonly used in parts recovery and in obtaining surfaces with improved properties. Within this field, it is important to analyze the effect of alloying elements on the properties of the deposited layers. One of the critical parameters affecting alloying performances in SMAW is improper arc length. This article examines the effect of the addition of niobium in different quantities (0, 2, 4, 6, and 8% by weight) to the electrode coating in Fe-Cr-C shielded metal arc welding (SMAW), with short and long arc lengths, on the operational process efficiency, dilution, arc energy, microstructure, and microhardness of the deposited layers. A decrease in operational process efficiency and dilution was found with increases in niobium content. On the other hand, it was found that adding niobium leads to a refinement in chromium carbide sizes, directly affecting the hardness of the obtained deposits. There is a direct relationship between the arc energy, with both short and long arc lengths, leading to a tendency to decrease the dilution in the obtained hardfacing.
En la reconstrucción de piezas de maquinarias es esencial determinar la mejor opción en cuanto a material depositado por soldadura para recuperación de geometrías perdidas se refiere. El presente trabajo se desarrolló para mejorar las aplicaciones de recubrimientos duros y materiales de relleno para la reconstrucción de “sprockets”, pero que se pueda extrapolar al uso en industrias de diferente tipo. Se tomaron en cuenta dos (2) factores, material depositado y temperatura de aplicación, que afectan las características finales de los recubrimientos duros aplicados por soldadura. Los resultados obtenidos de la aplicación del ensayo de desgaste fueron pérdida en peso en milímetros cúbicos (mm3) del material, lo cual brindó la resistencia al desgaste de cada una de las capas depositadas. Tomando la probeta que más se acercó al promedio obtenido del ensayo de desgaste se cortó para caracterizarla microestructuralmente, tomar mediciones de microdureza en zona cercana a la cara de desgaste, analizar la superficie por microscopia SEM, medir la composición química en la capa desgastada y determinar su estructura por difracción de rayos X. Los recubrimientos obtenidos a partir de electrodos con altos contenidos de cromo mostraron las mejores propiedades antidesgaste, seguidos de los recubrimientos aplicados con electrodos con contenidos de manganeso del 15% (aceros Hadfield) y en menores valores los recubrimientos aplicados con electrodos de bajo carbono y baja aleación mostraron los resultados más bajos según las condiciones de laboratorio aplicadas.
This study investigates the chemical composition, microstructural evolution, and mechanical behavior of hardfacing coatings produced by Shielded Metal Arc Welding (SMAW) using electrodes with varying niobium (Nb) contents (0%, 2%, 4%, 6%, and 8%), deposited at a constant current of 120 A and employing two- and three-layer configurations. Optical Emission Spectroscopy (OES) revealed a significant reduction in niobium transfer efficiency, with the Nb content in the coatings reaching up to 3.5 wt%, approximately 50% lower than in the electrodes. Chromium (Cr) content also decreased with increasing Nb additions due to the higher thermochemical affinity of niobium for oxygen, which promotes the formation of Nb oxides during welding. X-ray diffraction (XRD) analyses confirmed the presence of complex carbides, primarily NbC and M7C3-type Cr carbides, embedded in eutectic austenitic matrices. The incorporation of niobium promoted grain refinement and the precipitation of primary NbC carbides, particularly in multilayer coatings where dilution effects were reduced. Scanning Electron Microscopy (SEM) and Energy-Dispersive Spectroscopy (EDS) provided additional evidence, revealing an increased density of NbC particles and a concomitant reduction in CrC particle size with higher Nb contents. Microhardness testing showed a slight increase in hardness with increasing niobium, attributed to the higher intrinsic hardness and finer size of NbC particles. Overall, these findings highlight the role of niobium as an effective grain refiner and hard-phase promoter in SMAW-applied coatings, providing a foundation for optimizing wear-resistant overlays for demanding industrial environments.
This study evaluates the techno-economic viability of bifacial photovoltaic (PV) systems in Uribia, La Guajira—the department that holds Colombia’s strongest solar resource, with a mean global horizontal irradiance near 5.6 kWh/m2/day and seasonal peaks above 6.0. Despite this endowment, the country’s installed solar capacity remains far below its potential, largely because developers lack the site-specific financial risk analyses that investment decisions require. To address this, we pair stochastic Monte Carlo simulation with a set of machine learning surrogate models and quantify how Colombia’s Law 1715 fiscal incentives—VAT exclusion and accelerated depreciation—reshape the Levelized Cost of Electricity (LCOE) of bifacial PV systems under realistic climatic variability. Drawing on six years of daily meteorological data, we model bifacial PERC performance under two ground-albedo conditions: the natural site value () and an optimized surface (). The results are consistent and encouraging. Under the Law 1715 tax shields, the mean LCOE settles at 0.0588 USD/kWh, and even the 95% Value-at-Risk (VaR) of 0.0638 USD/kWh stays below the prevailing Colombian industrial tariff across every climatic realization evaluated—evidence that the fiscal framework does as much to compress downside risk as it does to lower the average cost. Ground-albedo optimization proved to be the decisive lever: raising from 0.125 to 0.30 through low-cost surface preparation shortens the payback period to roughly four years and lets the bifacial configuration overtake the cumulative net present value of the monofacial baseline before year seven. The surrogate models tell a complementary story about the structure of the problem. The non-linear algorithms—Support Vector Regression, Gradient Boosting, a Multi-Layer Perceptron and Gaussian Process Regression—reproduce the Monte Carlo response surface almost exactly (, 0.994–0.997), whereas linear models trail at –, a gap that quantifies just how strongly the techno-economic drivers of LCOE interact.