In this work, we used poly(3,4-ethylenedioxylenethiophene):poly(styrene sulfonate) (PEDOT:PSS, PH 1000) and poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine) (PTAA) as anode and hole transport materials, respectively, for fabricating metal oxide-free inverted perovskite solar cells (PSCs). The sheet resistance of the PEDOT:PSS (PH 1000) anode was reduced to 76 Ω sq−1 after treatment with ethylene glycol and phosphoric acid, a level comparable to that of conventional indium tin oxide. The hydrophobicity of PTAA improved the perovskite crystallization, facilitating performance improvements in the PSCs. A high power conversion efficiency (PCE) of 14.23% was achieved for these structured rigid PSCs on a rigid glass substrate, with the short-circuit current density, open-circuit voltage, and fill factor of 19.88 mA cm−2, 1.02 V, and 70.2%, respectively. Flexible PSCs on a polyethylene terephthalate substrate exhibited a high PCE of 10.51% with excellent bendability. Our results indicate that using anodes of PEDOT:PSS (PH 1000) and hole transport layers of PTAA presents a promising fabrication method for high-performance rigid and flexible metal oxide-free PSCs, which suggests future large-scale and roll-to-roll production.
For an iron-chromium redox flow battery (ICRFB), sulfonated poly(ether ether ketone) (SPEEK) membranes with five various degrees of sulfonation (DSs) are studied. To select the SPEEK membrane with the ideal DS for ICRFB applications, the physicochemical characteristics and single-cell performance are taken into consideration. Following all the investigations, it has been determined that the SPEEK membrane, which has a DS of 57% and a thin thickness of 25 μm, is the best option for replacing commercial Nafion 212 in ICRFB. Firstly, it exhibits a better cell performance according to energy efficiency (EE) and coulombic efficiency (CE) at the current density range between 40 mA cm−2 and 80 mA cm−2. Additionally, it has a more stable EE (79.25–81.64%) and lower discharge capacity decay rate (50%) than the Nafion 212 (EE: 76.74–81.45%, discharge capacity decay: 76%) after 50 charge–discharge cycles, which proves its better oxidation stability as well. In addition, the longer self-discharge time during the open-circuit voltage test further demonstrates that this SPEEK membrane could be employed for large-scale ICRFB applications.