In this paper, we have designed, simulated, fabricated and characterized a clamped-clamped micro mechanical structure based shunt capacitive RF MEMS switch. The clamped-clamped micromechanical structure is micromachined using gold metal thickness of 500 nm. AlN is used as dielectric material, and it is deposited using DC sputtering PVD process. In MEMS Technology, particularly in devices fabrication, releasing the membrane is a difficult task, here we have presented a novel wet process to release the membrane. Primarily the S1813 sacrificial layer is etched by using piranha solution and cleaned with IPA solution. Critical point drying is done after fabrication to reduce the stiction effect on the switch. Overall, the switch requires the pull-in voltage of 5.5 V for 1.8 μm displacement. In the process of optimization, primarily the switch is designed and simulated using finite element method tools. The reliability of the capacitive RF MEMS switches depends on the stiction problem caused by dielectric charging, the proposed capacitive switch dielectric charging behavior is characterized using CV curve method.
This paper deals with the study of dimple type RF MEMS capacitive shunt switch using different meandering techniques for high isolation and low actuation voltage. The novelty of the proposed RF MEMS switch is it incorporates the meanders and dimples, which help to reduce the actuation voltage. The proposed switch structure is optimized, designed, and simulated with FEM analysis such as electromechanical and electromagnetic by using COMSOL and HFSS tools respectively. The best performance of the switch is observed by varying different parameters such as beam material, beam thickness, dielectric thickness, and airgap. The proposed switch with different meandering techniques attains the pull-in voltage in the range of 10.3–46 V, particularly the three uniform meander technique has low actuation voltage of 10.3 V. The RF performance of the device is particularly tuned in the range of 26.5–40 GHz frequency range and it is analyzed for all types of meanders. Among them, the non-uniform single meander has attained the best isolation of −54.13 dB at 40 GHz in the off state. The insertion and return losses of the device are −0.514 dB and −17.35 dB over 1–40 GHz frequency in on state.
10 October 2022 in Journal of Electrical Engineering & Technology